Pitot Tube

[Wayne G. O'Shea]

that's the same one I've seen as well Ken! Attaches to the leading edge.
Ordered one from MAM ~ 2 years ago to repair Bernie's D's first wreck.

Wayne

----- Original Message -----
From: "Ken" <klehman@albedo.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 28, 2005 4:49 PM
Subject: Re: pitot tube

Hmmm - have they switched to the one that Spruce sells. Mine (from MAM)
is about a foot long piece of 3/4" tubing welded to a flange that wraps
around the leading edge. I removed it when I installed Angus's drooped
leading edge.
Ken

LisaFly99@aol.com wrote:

In a message dated 2/28/2005 11:57:07 A.M. Central Standard Time,
oxyport@globetrotter.net writes:

What does the mam pitot tube look? How much and where are you located




JEAN
It's apiece of 3/16" ID aluminum tubing that's aprox 10 3/4" long with a

90

deg. bend at 4 1/4" and a mounting plate at 1 1/2" down the 6 1/2" side

to

screw to the wing bottom.
PDSmith

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[LisaFly99]

The pitot tube described below was from kit 280
PDSmith


that's the same one I've seen as well Ken! Attaches to the leading edge.
Ordered one from MAM ~ 2 years ago to repair Bernie's D's first wreck.

Wayne

----- Original Message -----
From: "Ken" <klehman@albedo.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 28, 2005 4:49 PM
Subject: Re: pitot tube

Hmmm - have they switched to the one that Spruce sells. Mine (from MAM)
is about a foot long piece of 3/4" tubing welded to a flange that wraps
around the leading edge. I removed it when I installed Angus's drooped
leading edge.
Ken

LisaFly99@aol.com wrote:

In a message dated 2/28/2005 11:57:07 A.M. Central Standard Time,
oxyport@globetrotter.net writes:

What does the mam pitot tube look? How much and where are you located




JEAN
It's apiece of 3/16" ID aluminum tubing that's aprox 10 3/4" long with a

90

deg. bend at 4 1/4" and a mounting plate at 1 1/2" down the 6 1/2" side

to

screw to the wing bottom.
PDSmith

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[LisaFly99]

In a message dated 2/28/2005 10:19:54 P.M. Central Standard Time,
LisaFly99@aol.com writes:

The pitot tube described below was from kit 280
PDSmith



CORECTION Kit 281




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Craig Walls]

Hi all,



I sent this out last week and didn't get any replies. Thought I'd try
again. I'm looking for suggestions for a heated pitot. I'm getting close
to the point where I need to be building it in. Thanks a bunch. CW





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------