murphy fire wall forward kit

Jones, Michael · Post by **Jones, Michael** » Sat Feb 18, 2012 10:06 am

howdy lads

know at least few people have used the 0-320 Murphy fire wall forward kit,
any comments about it, what was missing, would you recommend it or should I
source all the parts myself

thanks

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jeffrey Steenson · Post by **Jeffrey Steenson** » Sat Feb 18, 2012 10:06 am

Dear Mike,

It's a convenience to have all the parts in there, but I don't think there
is any cost savings. I asked MAM to send me the shipping list for the kit,
and then I started comparing with Aircraft Spruce. Seemed to me to be a
wash.

I agree with many others here that the baffle kit from Van's Aircraft will
make your life much fuller and happier than the aluminum sheet and minimal
instructions contained in the FWF kit.

Jeffrey Steenson
E714
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Wednesday, February 02, 2005 6:14 AM
Subject: murphy fire wall forward kit

howdy lads

know at least few people have used the 0-320 Murphy fire wall forward kit,
any comments about it, what was missing, would you recommend it or should
I
source all the parts myself

thanks

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jones, Michael · Post by **Jones, Michael** » Sat Feb 18, 2012 10:06 am

hi jeff

i have heard of the vans baffle kit, will get it i think
as for murphy will have to pick & choose, but end up with most of it except
cowl

mike#007r

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jeffrey Steenson
Sent: Wednesday, February 02, 2005 10:02 AM
To: rebel-builders@dcsol.com
Subject: Re: murphy fire wall forward kit

Dear Mike,

It's a convenience to have all the parts in there, but I don't think there
is any cost savings. I asked MAM to send me the shipping list for the kit,
and then I started comparing with Aircraft Spruce. Seemed to me to be a
wash.

I agree with many others here that the baffle kit from Van's Aircraft will
make your life much fuller and happier than the aluminum sheet and minimal
instructions contained in the FWF kit.

Jeffrey Steenson
E714
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Wednesday, February 02, 2005 6:14 AM
Subject: murphy fire wall forward kit

howdy lads

know at least few people have used the 0-320 Murphy fire wall forward kit,
any comments about it, what was missing, would you recommend it or should
I
source all the parts myself

thanks

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

carol and murray cherkas · Post by **carol and murray cherkas** » Sat Feb 18, 2012 10:09 am

Jeff

This is a non issue. Just buy the baffles from Mr. Van. Save yourself a
whole lot of headache. They fit great.Trim to fit cowl and your done.

Good Luck
Murray
Rebel 505

----- Original Message -----
From: "Jeffrey Steenson" <jsteenson1@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 02, 2005 8:01 AM
Subject: Re: murphy fire wall forward kit

Dear Mike,

It's a convenience to have all the parts in there, but I don't think there
is any cost savings. I asked MAM to send me the shipping list for the
kit,
and then I started comparing with Aircraft Spruce. Seemed to me to be a
wash.

I agree with many others here that the baffle kit from Van's Aircraft will
make your life much fuller and happier than the aluminum sheet and minimal
instructions contained in the FWF kit.

Jeffrey Steenson
E714
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Wednesday, February 02, 2005 6:14 AM
Subject: murphy fire wall forward kit

howdy lads

know at least few people have used the 0-320 Murphy fire wall forward
kit,
any comments about it, what was missing, would you recommend it or should
I
source all the parts myself

thanks

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Legeorgen · Post by **Legeorgen** » Sat Feb 18, 2012 10:09 am

Mike,

I think Jeffery said it all on the MAM firewall forward kit.

Bruce

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

K. Oliver · Post by **K. Oliver** » Sat Feb 18, 2012 10:09 am

I found the same to be true
Unless you are going to one of the big flyins such as Sun n Fun,, ect
There are dollars to be saved if you know what you want

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jeffrey Steenson
Sent: Wednesday, February 02, 2005 10:02 AM
To: rebel-builders@dcsol.com
Subject: Re: murphy fire wall forward kit

Dear Mike,

It's a convenience to have all the parts in there, but I don't think there
is any cost savings. I asked MAM to send me the shipping list for the kit,
and then I started comparing with Aircraft Spruce. Seemed to me to be a
wash.

I agree with many others here that the baffle kit from Van's Aircraft will
make your life much fuller and happier than the aluminum sheet and minimal
instructions contained in the FWF kit.

Jeffrey Steenson
E714
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Wednesday, February 02, 2005 6:14 AM
Subject: murphy fire wall forward kit

howdy lads

know at least few people have used the 0-320 Murphy fire wall forward kit,
any comments about it, what was missing, would you recommend it or should
I
source all the parts myself

thanks

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

british thunder · Post by **british thunder** » Sat Feb 18, 2012 10:09 am

finally decided on a 0-320????
Cecil
014R

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Wednesday, February 02, 2005 7:14 AM
Subject: murphy fire wall forward kit

howdy lads

know at least few people have used the 0-320 Murphy fire wall forward kit,
any comments about it, what was missing, would you recommend it or should

I

source all the parts myself

thanks

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Clay Smith · Post by **Clay Smith** » Sat Feb 18, 2012 10:09 am

I suggest that you price around and pick and choose. You may not want
everything in the kit. I went to a local alternator rebuild shop and got
them to custom build me a light weight alternator with heavy duty diodes and
stator (60 amp)and had it reconfigured for external regulation ... and still
saved. I would buy the throttle/mixture control bracket that bolts to the
engine instead of attaching the bracket to the firewall as MAM suggest. I
think you can get that bracket at Van's..? Also, from what I hear and what
I know now, I would probably buy the baffle kit from Van's ... the
instructions and paper templates from MAM are not very accurate ...at least
not for my engine and cowl combo.

Clay

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Wednesday, February 02, 2005 9:44 AM
Subject: murphy fire wall forward kit

howdy lads

know at least few people have used the 0-320 Murphy fire wall forward kit,
any comments about it, what was missing, would you recommend it or should

I

source all the parts myself

thanks

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------