Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Wing Tip Landing Lights Moose

Converted from Wildcat! database. (read only)
Locked
Ryan Mowat

Wing Tip Landing Lights Moose

Post by Ryan Mowat » Sat Feb 18, 2012 10:05 am

If any one is interested I have a set of landing lights and wing tips for a
Moose for sale. These are the straight tips rather than the horton type
tips. I flew with them for about 1 year before changing them out for the
bigger ones.

Any reasonable offer will be considered.

Ryan Mowat
rmowat@forge-industrial.com
604 897 4101



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ryan Mowat

Wing Tip Landing Lights Moose

Post by Ryan Mowat » Sat Feb 18, 2012 10:05 am

I have posted a picture of the MAM STOL Moose tips beside a MAM standard
Moose tip. Posted under Moose modifications - did not see a wing tip
category. (what do you call two Moose side by side?)

At the time of this photo the landing lights were not avialable for the MAM
STOL tips. However, I understand that one set of landing light tips have
been shipped already. I want to install a set of tip lights as soon as I
have time order them.

Frankly the wing tip lights in the standard MAM tips look really good and I
expect the MAM STOL tips will look good with lights too.

Ryan Mowat, SR 157

On Wed, 26 Jan 2005 20:11:46 -0900, sr227 wrote
Hi Ryan,

Now that I built my murphy "quick build wings", I am contemplating
cutting the leading edge for landing/taxi lights or installing them
in the new MAM tips. The last tips I did for my RV-8 were labor
intensive and not "as advertised". I'll assume Murphy is
underestimating the time and effort required for the new tip
installation and lighting kit. Your thoughts? can you email or
upload a picture of your new tips?

Regards,
Aaron
aaronzeff@hotmail.com

On 1/26/2005 6:33 PM, MKIMBALL@GCI.NET wrote to REBEL-BUILDERS:

-> Received: by dcsol.com (Wildcat! SMTP Router v6.0.451.3)

-> for rebel-builders@dcsol.com; Wed, 26 Jan 2005 18:29:55
-0900 -> Received: from mercury.acsalaska.net ([209.112.173.226])
EHLO=mercury.acsalaska.net
-> by dcsol.com (Wildcat! SMTP v6.0.451.3) with SMTP
-> id 1141565750; Wed, 26 Jan 2005 18:29:53 -0900
-> Received: from mikespc (209-193-47-2-cdsl-rb1.fai.acsalaska.net
[209.193.47.2])
-> by mercury.acsalaska.net (8.13.1/8.13.1) with SMTP id j0R3k9kc073118

-> for <rebel-builders@dcsol.com>; Wed, 26 Jan 2005 18:46:10 -0900
(AKST) -> (envelope-from mkimball@gci.net) -> From: "Mike Kimball"
<mkimball@gci.net>
-> To: <rebel-builders@dcsol.com>
-> Subject: RE: Wing Tip Landing Lights Moose
-> Date: Wed, 26 Jan 2005 18:33:21 -0900
-> Message-ID: <000901c50420$f3719920$0700a8c0@mikespc>
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: text/plain; charset="iso-8859-1"
-> X-Orig-Content-Transfer-Encoding: 7bit
-> X-Priority: 3 (Normal)
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0
-> In-reply-to: <20050126062645.M43851@forge-industrial.com>
-> X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1409
-> Importance: Normal
-> X-ACS-Spam-Status: no
-> X-ACS-Scanned-By: MD 2.48; SA 3.0.1; spamdefang 1.111
-> X-Scanned-By: MIMEDefang 2.48 on 209.112.173.226
-> X-Antivirus-Remover: Message filtered with wsAV v2.0.0 Build 001
->
-> Perhaps I am misreading, but have you mounted Horton STOL tips?
I thought -> that with no Fife hoerner tips for a Super Rebel/Moose
that there weren't -> any other tips available to fit except those
provided by MAM. The Horton -> STOL mod is available for various
production airplanes. Did you modify tips -> for a particular
production model? I'm going to be doing wing tips soon and -> the
MAM tips look terrible. I'll bet they are going to be a pain to mount.
-> If there are options, I'd sure like to know. Thanks.
->
-> Mike
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf
Of -> Ryan Mowat -> Sent: Tuesday, January 25, 2005 9:33 PM -> To:
rebel-builders@dcsol.com -> Subject: Wing Tip Landing Lights Moose
-> -> -> If any one is interested I have a set of landing lights and
wing tips for a -> Moose for sale. These are the straight tips
rather than the horton type -> tips. I flew with them for about 1
year before changing them out for the -> bigger ones. -> -> Any
reasonable offer will be considered. -> -> Ryan Mowat ->
rmowat@forge-industrial.com -> 604 897 4101 -> -> -> -> -------------
---------------------------------------------------- -> List
archives located at: https://www.dcsol.com/login?mode=HTML ->
username "rebel" password "builder" -> Subscription services
located at: -> https://www.dcsol.com/public/code/html-subscribe.htm
-> List administrator: mike.davis@dcsol.com -> ---------------------
-------------------------------------------- -> -> ->

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
--




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Mike Kimball

Wing Tip Landing Lights Moose

Post by Mike Kimball » Sat Feb 18, 2012 10:05 am

Perhaps I am misreading, but have you mounted Horton STOL tips? I thought
that with no Fife hoerner tips for a Super Rebel/Moose that there weren't
any other tips available to fit except those provided by MAM. The Horton
STOL mod is available for various production airplanes. Did you modify tips
for a particular production model? I'm going to be doing wing tips soon and
the MAM tips look terrible. I'll bet they are going to be a pain to mount.
If there are options, I'd sure like to know. Thanks.

Mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Ryan Mowat
Sent: Tuesday, January 25, 2005 9:33 PM
To: rebel-builders@dcsol.com
Subject: Wing Tip Landing Lights Moose


If any one is interested I have a set of landing lights and wing tips for a
Moose for sale. These are the straight tips rather than the horton type
tips. I flew with them for about 1 year before changing them out for the
bigger ones.

Any reasonable offer will be considered.

Ryan Mowat
rmowat@forge-industrial.com
604 897 4101



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ryan Mowat

Wing Tip Landing Lights Moose

Post by Ryan Mowat » Sat Feb 18, 2012 10:05 am

Mike,

I have installed version two of the MAM wing tips for the Moose - version
two is similair in apearance to the Horton STOL tip plus it adds about 8" to
each wing length. The bad news is that the old wing tip landing lights do
not fit the new MAM "version two" wing tips.

I agree that the orginal MAM wingtips were not flatering, but I do like the
new "version two" MAM tips. The first version of wing tips took me about 40
hours to fit. The new "version two" MAM tips went on in two evenings after
work - and that was working off of a pinic table and ladders as it was on
floats.

I have a pair of "version one" tips all fitted with lights if someone wishes
a fast ready to go installation.

I have a great picture of two sets side by side if you are interested.

Ryan Mowat


On Wed, 26 Jan 2005 18:33:21 -0900, Mike Kimball wrote
Perhaps I am misreading, but have you mounted Horton STOL tips? I thought
that with no Fife hoerner tips for a Super Rebel/Moose that there weren't
any other tips available to fit except those provided by MAM. The Horton
STOL mod is available for various production airplanes. Did you
modify tips for a particular production model? I'm going to be
doing wing tips soon and the MAM tips look terrible. I'll bet they
are going to be a pain to mount. If there are options, I'd sure like
to know. Thanks.

Mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Ryan Mowat
Sent: Tuesday, January 25, 2005 9:33 PM
To: rebel-builders@dcsol.com
Subject: Wing Tip Landing Lights Moose

If any one is interested I have a set of landing lights and wing
tips for a Moose for sale. These are the straight tips rather than
the horton type tips. I flew with them for about 1 year before
changing them out for the bigger ones.

Any reasonable offer will be considered.

Ryan Mowat
rmowat@forge-industrial.com
604 897 4101

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
--




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
sr227

Wing Tip Landing Lights Moose

Post by sr227 » Sat Feb 18, 2012 10:05 am

Hi Ryan,

Now that I built my murphy "quick build wings", I am contemplating cutting
the leading edge for landing/taxi lights or installing them in the new MAM
tips. The last tips I did for my RV-8 were labor intensive and not "as
advertised". I'll assume Murphy is underestimating the time and effort
required for the new tip installation and lighting kit. Your thoughts? can
you email or upload a picture of your new tips?

Regards,
Aaron
aaronzeff@hotmail.com

On 1/26/2005 6:33 PM, MKIMBALL@GCI.NET wrote to REBEL-BUILDERS:

-> Received: by dcsol.com (Wildcat! SMTP Router v6.0.451.3)
-> for rebel-builders@dcsol.com; Wed, 26 Jan 2005 18:29:55 -0900
-> Received: from mercury.acsalaska.net ([209.112.173.226])
EHLO=mercury.acsalaska.net
-> by dcsol.com (Wildcat! SMTP v6.0.451.3) with SMTP
-> id 1141565750; Wed, 26 Jan 2005 18:29:53 -0900
-> Received: from mikespc (209-193-47-2-cdsl-rb1.fai.acsalaska.net
[209.193.47.2])
-> by mercury.acsalaska.net (8.13.1/8.13.1) with SMTP id j0R3k9kc073118
-> for <rebel-builders@dcsol.com>; Wed, 26 Jan 2005 18:46:10 -0900 (AKST)
-> (envelope-from mkimball@gci.net)
-> From: "Mike Kimball" <mkimball@gci.net>
-> To: <rebel-builders@dcsol.com>
-> Subject: RE: Wing Tip Landing Lights Moose
-> Date: Wed, 26 Jan 2005 18:33:21 -0900
-> Message-ID: <000901c50420$f3719920$0700a8c0@mikespc>
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: text/plain; charset="iso-8859-1"
-> X-Orig-Content-Transfer-Encoding: 7bit
-> X-Priority: 3 (Normal)
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0
-> In-reply-to: <20050126062645.M43851@forge-industrial.com>
-> X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1409
-> Importance: Normal
-> X-ACS-Spam-Status: no
-> X-ACS-Scanned-By: MD 2.48; SA 3.0.1; spamdefang 1.111
-> X-Scanned-By: MIMEDefang 2.48 on 209.112.173.226
-> X-Antivirus-Remover: Message filtered with wsAV v2.0.0 Build 001
->
-> Perhaps I am misreading, but have you mounted Horton STOL tips? I thought
-> that with no Fife hoerner tips for a Super Rebel/Moose that there weren't
-> any other tips available to fit except those provided by MAM. The Horton
-> STOL mod is available for various production airplanes. Did you modify
tips
-> for a particular production model? I'm going to be doing wing tips soon
and
-> the MAM tips look terrible. I'll bet they are going to be a pain to mount.
-> If there are options, I'd sure like to know. Thanks.
->
-> Mike
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> Ryan Mowat
-> Sent: Tuesday, January 25, 2005 9:33 PM
-> To: rebel-builders@dcsol.com
-> Subject: Wing Tip Landing Lights Moose
->
->
-> If any one is interested I have a set of landing lights and wing tips for a
-> Moose for sale. These are the straight tips rather than the horton type
-> tips. I flew with them for about 1 year before changing them out for the
-> bigger ones.
->
-> Any reasonable offer will be considered.
->
-> Ryan Mowat
-> rmowat@forge-industrial.com
-> 604 897 4101
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login?mode=HTML
-> username "rebel" password "builder"
-> Subscription services located at:
-> https://www.dcsol.com/public/code/html-subscribe.htm
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Dale Fultz

Wing Tip Landing Lights Moose

Post by Dale Fultz » Sat Feb 18, 2012 10:05 am

Hi Mike , I have to agree with Ryan I have the new tips and they look very
good and seem easy to work with. I talked to MAM though and was told no
lights yet. Dale
----- Original Message -----
From: "Ryan Mowat" <rmowat@forge-industrial.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 26, 2005 11:19 PM
Subject: RE: Wing Tip Landing Lights Moose

Mike,

I have installed version two of the MAM wing tips for the Moose - version
two is similair in apearance to the Horton STOL tip plus it adds about 8"
to
each wing length. The bad news is that the old wing tip landing lights do
not fit the new MAM "version two" wing tips.

I agree that the orginal MAM wingtips were not flatering, but I do like
the
new "version two" MAM tips. The first version of wing tips took me about
40
hours to fit. The new "version two" MAM tips went on in two evenings
after
work - and that was working off of a pinic table and ladders as it was on
floats.

I have a pair of "version one" tips all fitted with lights if someone
wishes
a fast ready to go installation.

I have a great picture of two sets side by side if you are interested.

Ryan Mowat


On Wed, 26 Jan 2005 18:33:21 -0900, Mike Kimball wrote
Perhaps I am misreading, but have you mounted Horton STOL tips? I
thought
that with no Fife hoerner tips for a Super Rebel/Moose that there
weren't
any other tips available to fit except those provided by MAM. The
Horton
STOL mod is available for various production airplanes. Did you
modify tips for a particular production model? I'm going to be
doing wing tips soon and the MAM tips look terrible. I'll bet they
are going to be a pain to mount. If there are options, I'd sure like
to know. Thanks.

Mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Ryan Mowat
Sent: Tuesday, January 25, 2005 9:33 PM
To: rebel-builders@dcsol.com
Subject: Wing Tip Landing Lights Moose

If any one is interested I have a set of landing lights and wing
tips for a Moose for sale. These are the straight tips rather than
the horton type tips. I flew with them for about 1 year before
changing them out for the bigger ones.

Any reasonable offer will be considered.

Ryan Mowat
rmowat@forge-industrial.com
604 897 4101

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
--




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 1/21/05


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 1/21/05




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”