SR and Moose flaps

[Tom and Joy Packard]

Some time ago, someone (I think Al Paxia) was going to try using
Teleflex cable on a floor mounted flap handle for a SR or Moose. I
would also like to eliminate the pulleys and slot with fairing on top
and think the Teleflex cable would work. Has anyone tried this and do
you have any photos or sketches of the installation? How has it
performed and would you change anything? Also, what size Teleflex was
used and how and where did you attach it to the flap control tube?
Thanks to anyone with the info.

Tom Packard
SR 043



------ http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! ------



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Hi Tom,
Yes, I used a Teleflex cable and it works good. The flaps deploy when the
cable is pulled. The raising of the flaps is pushing on the cable, so I did
add one spring to help the cable. I will post a picture out of the
bellcrank mechanism where it attaches to the flaptube and Teleflex. I will
measure the Teleflex tomorrow and let you know the length, but a little
extra length is not a problem.
Al
----- Original Message -----
From: "Tom and Joy Packard" <jtpackard@usfamily.net>
To: <murphy-rebel@dcsol.com>
Sent: Thursday, March 11, 2004 8:32 AM
Subject: SR and Moose flaps

Some time ago, someone (I think Al Paxia) was going to try using
Teleflex cable on a floor mounted flap handle for a SR or Moose. I
would also like to eliminate the pulleys and slot with fairing on top
and think the Teleflex cable would work. Has anyone tried this and do
you have any photos or sketches of the installation? How has it
performed and would you change anything? Also, what size Teleflex was
used and how and where did you attach it to the flap control tube?
Thanks to anyone with the info.

Tom Packard
SR 043



------ http://USFamily.Net/info - Unlimited Internet - From

$8.99/mo! ------
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[steveh]

-------- Forwarded Message ---------
Original: DATE..... 3/11/2004 6:43 PM
Original: FROM..... "AL PAXHIA" <PAXHIA2@COMCAST.NET>
Original: TO....... ALL
Original: SUBJECT.. Re: SR and Moose flaps
Original: FORUM.... Rebel Builders
Forwarded By....... SteveH on 11/3/2004 3:43 AM

Received: from latitude.dostech.net (latitude.internal.dostech.net
[10.145.1.254])
by dilbert.dostech.net (8.12.8/8.12. with DOS Technologies IMAP to NNTP
service,
Copyright 2004 DOS Technologies (http://www.dostech.ca/) & Daryl C. W. O'Shea,
Sun, 27 Jun 2004 04:33:36 -0400 (EDT)
Received: from virusscan1.csolve.net ([216.208.154.16])
by humvee.csolve.net with esmtp (Exim 4.24)
id 1B1cef-0007u7-AH
for oifa@irishfield.on.ca; Thu, 11 Mar 2004 21:44:09 -0500
Received: from dcsol.com (mail.dcsol.com [209.193.47.105])
by virusscan1.csolve.net (8.12.6/8.12.6) with SMTP id i2C2i5Hu061749
for <oifa@irishfield.on.ca>; Thu, 11 Mar 2004 21:44:05 -0500 (EST)
(envelope-from mike.davis@dcsol.com)
Received: by dcsol.com (Wildcat! SMTP Router v5.7.450.9b10)
for oifa@irishfield.on.ca; Thu, 11 Mar 2004 17:43:56 -0900
Received: from ([192.168.0.3]) HELO=dcsol.com
by dcsol.com (Wildcat! SMTP v5.7.450.9b10) with SMTP
id 180056953; Thu, 11 Mar 2004 17:43:54 -0900
Received: by dcsol.com (wcListServe v5.6.450.6)
for murphy-rebel@dcsol.com; Thu, 11 Mar 2004 17:43:51 -0900
Received: by dcsol.com (Wildcat! SMTP Router v5.7.450.9b10)
for murphy-rebel@dcsol.com; Thu, 11 Mar 2004 17:43:43 -0900
Received: from ([204.127.202.64]) EHLO=sccrmhc13.comcast.net
by dcsol.com (Wildcat! SMTP v5.7.450.9b10) with SMTP
id 180044343; Thu, 11 Mar 2004 17:43:41 -0900
Received: from NEWCOMPUTER (c-24-19-146-170.client.comcast.net[24.19.146.170])
by comcast.net (sccrmhc13) with SMTP
id <2004031202432601600lmicae>; Fri, 12 Mar 2004 02:43:26 +0000
Message-ID: <000b01c407db$cc74b790$6401a8c0@NEWCOMPUTER>
From: "Al Paxhia" <paxhia2@comcast.net>
Newsgroups: interim-mrl
To: murphy-rebel@dcsol.com
References: <001101c40786$64e07420$4d73ee3f@packard001>
Subject: Re: SR and Moose flaps
Date: Thu, 11 Mar 2004 18:43:27 -0800
X-Orig-MIME-Version: 1.0
X-Orig-Content-Type: text/plain; charset="iso-8859-1"
X-Orig-Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1158
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165
X-Antivirus-Remover: Message was filtered through wsMailGuard (wsAV)
Sender: <mike.davis@dcsol.com>
Reply-To: <murphy-rebel@dcsol.com>
Errors-To: <mike.davis@dcsol.com>
X-VSCAN: Not scanned: please contact your Internet E-Mail Service Provider for
details
X-UIDL: JAm!!9J["!"]f"!G!h"!
Organization: Davis Family
X-NNTP-Server: WcNNTPServer v6.0.451.1
X-Anonymous-Client: barrie-dialport-216.209.18.175.csolve.net (216.209.18.175)

Hi Tom,
Yes, I used a Teleflex cable and it works good. The flaps deploy when the
cable is pulled. The raising of the flaps is pushing on the cable, so I did
add one spring to help the cable. I will post a picture out of the
bellcrank mechanism where it attaches to the flaptube and Teleflex. I will
measure the Teleflex tomorrow and let you know the length, but a little
extra length is not a problem.
Al
----- Original Message -----
From: "Tom and Joy Packard" <jtpackard@usfamily.net>
To: <murphy-rebel@dcsol.com>
Sent: Thursday, March 11, 2004 8:32 AM
Subject: SR and Moose flaps

Some time ago, someone (I think Al Paxia) was going to try using
Teleflex cable on a floor mounted flap handle for a SR or Moose. I
would also like to eliminate the pulleys and slot with fairing on top
and think the Teleflex cable would work. Has anyone tried this and do
you have any photos or sketches of the installation? How has it
performed and would you change anything? Also, what size Teleflex was
used and how and where did you attach it to the flap control tube?
Thanks to anyone with the info.

Tom Packard
SR 043



------ http://USFamily.Net/info - Unlimited Internet - From

$8.99/mo! ------
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*






----- End of Forwarded Message -----




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[steveh]

Al:

Found this in the archives. Did you ever up load any pictures of this
install? ? ? If not, could you upload some.

Could you post any info on this install? Very interested in doing the same
thing to our Moose. Any info would be great. Where to get this cable,
length, ect.

Thanks
Steve H
Moose 213



->
-> Hi Tom,
-> Yes, I used a Teleflex cable and it works good. The flaps deploy when the
-> cable is pulled. The raising of the flaps is pushing on the cable, so I did
-> add one spring to help the cable. I will post a picture out of the
-> bellcrank mechanism where it attaches to the flaptube and Teleflex. I will
-> measure the Teleflex tomorrow and let you know the length, but a little
-> extra length is not a problem.
-> Al
-> ----- Original Message -----
-> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> To: <murphy-rebel@dcsol.com>
-> Sent: Thursday, March 11, 2004 8:32 AM
-> Subject: SR and Moose flaps
->
->
-> > Some time ago, someone (I think Al Paxia) was going to try using
-> > Teleflex cable on a floor mounted flap handle for a SR or Moose. I
-> > would also like to eliminate the pulleys and slot with fairing on top
-> > and think the Teleflex cable would work. Has anyone tried this and do
-> > you have any photos or sketches of the installation? How has it
-> > performed and would you change anything? Also, what size Teleflex was
-> > used and how and where did you attach it to the flap control tube?
-> > Thanks to anyone with the info.
-> >
-> > Tom Packard
-> > SR 043
-> >
-> >
-> >
-> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> $8.99/mo! ------
-> >
-> >
-> >
-> >
-> *-------------------------------------------------------------------------*
-> > To unsubscribe from this list go to:
-> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > Archives located at https://www.dcsol.com/default.htm
-> > Archives public username "rebel" password "builder"
-> > To contact the list admin, e-mail mike.davis@dcsol.com
-> >
-> *-------------------------------------------------------------------------*
-> >
-> >
-> >
-> >
->
->
->
->
-> *-------------------------------------------------------------------------*
-> To unsubscribe from this list go to:
-> https://www.dcsol.com/public/code/html-subscribe.wcx
-> Archives located at https://www.dcsol.com/default.htm
-> Archives public username "rebel" password "builder"
-> To contact the list admin, e-mail mike.davis@dcsol.com
-> *-------------------------------------------------------------------------*
->
->
->
->
->
->
-> ----- End of Forwarded Message -----
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Hi Steve,
I just posted a couple of old pictures. The Teleflex is a marine engine
control cable and follows the path from the flap handle to the flap tube in
a sweeping 180 degree turn. I used the bellcrank to change direction so the
pull stroke deployed the flaps and push on the cable did the retraction.
System has been flawless for over 400 hours and over 300 landings.
Al

----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 4:54 AM
Subject: Re: SR and Moose flaps

Al:

Found this in the archives. Did you ever up load any pictures of this
install? ? ? If not, could you upload some.

Could you post any info on this install? Very interested in doing the
same
thing to our Moose. Any info would be great. Where to get this cable,
length, ect.

Thanks
Steve H
Moose 213



->
-> Hi Tom,
-> Yes, I used a Teleflex cable and it works good. The flaps deploy when
the
-> cable is pulled. The raising of the flaps is pushing on the cable, so I
did
-> add one spring to help the cable. I will post a picture out of the
-> bellcrank mechanism where it attaches to the flaptube and Teleflex. I
will
-> measure the Teleflex tomorrow and let you know the length, but a little
-> extra length is not a problem.
-> Al
-> ----- Original Message -----
-> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> To: <murphy-rebel@dcsol.com>
-> Sent: Thursday, March 11, 2004 8:32 AM
-> Subject: SR and Moose flaps
->
->
-> > Some time ago, someone (I think Al Paxia) was going to try using
-> > Teleflex cable on a floor mounted flap handle for a SR or Moose. I
-> > would also like to eliminate the pulleys and slot with fairing on top
-> > and think the Teleflex cable would work. Has anyone tried this and
do
-> > you have any photos or sketches of the installation? How has it
-> > performed and would you change anything? Also, what size Teleflex
was
-> > used and how and where did you attach it to the flap control tube?
-> > Thanks to anyone with the info.
-> >
-> > Tom Packard
-> > SR 043
-> >
-> >
-> >
-> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> $8.99/mo! ------
-> >
-> >
-> >
-> >
->
*-------------------------------------------------------------------------*
-> > To unsubscribe from this list go to:
-> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > Archives located at https://www.dcsol.com/default.htm
-> > Archives public username "rebel" password "builder"
-> > To contact the list admin, e-mail mike.davis@dcsol.com
-> >
->
*-------------------------------------------------------------------------*
-> >
-> >
-> >
-> >
->
->
->
->
->
*-------------------------------------------------------------------------*
-> To unsubscribe from this list go to:
-> https://www.dcsol.com/public/code/html-subscribe.wcx
-> Archives located at https://www.dcsol.com/default.htm
-> Archives public username "rebel" password "builder"
-> To contact the list admin, e-mail mike.davis@dcsol.com
->
*-------------------------------------------------------------------------*
->
->
->
->
->
->
-> ----- End of Forwarded Message -----
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Scott Aldrich]

Al, yours has to be one of the higher time SR/Moose out there. Any issue
with the flap torque tube rivets? Have you heard anything about it? I
haven't finalized that part yet so I may just redesign to eliminate the
riveted tube if it is a problem.

Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Al
Paxhia
Sent: Wednesday, November 03, 2004 10:55 AM
To: rebel-builders@dcsol.com
Subject: Re: SR and Moose flaps

Hi Steve,
I just posted a couple of old pictures. The Teleflex is a marine engine
control cable and follows the path from the flap handle to the flap tube in
a sweeping 180 degree turn. I used the bellcrank to change direction so the
pull stroke deployed the flaps and push on the cable did the retraction.
System has been flawless for over 400 hours and over 300 landings.
Al

----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 4:54 AM
Subject: Re: SR and Moose flaps

Al:

Found this in the archives. Did you ever up load any pictures of this
install? ? ? If not, could you upload some.

Could you post any info on this install? Very interested in doing the
same
thing to our Moose. Any info would be great. Where to get this cable,
length, ect.

Thanks
Steve H
Moose 213



->
-> Hi Tom,
-> Yes, I used a Teleflex cable and it works good. The flaps deploy when
the
-> cable is pulled. The raising of the flaps is pushing on the cable, so I

did
-> add one spring to help the cable. I will post a picture out of the
-> bellcrank mechanism where it attaches to the flaptube and Teleflex. I
will
-> measure the Teleflex tomorrow and let you know the length, but a little
-> extra length is not a problem.
-> Al
-> ----- Original Message -----
-> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> To: <murphy-rebel@dcsol.com>
-> Sent: Thursday, March 11, 2004 8:32 AM
-> Subject: SR and Moose flaps
->
->
-> > Some time ago, someone (I think Al Paxia) was going to try using
-> > Teleflex cable on a floor mounted flap handle for a SR or Moose. I
-> > would also like to eliminate the pulleys and slot with fairing on top
-> > and think the Teleflex cable would work. Has anyone tried this and
do
-> > you have any photos or sketches of the installation? How has it
-> > performed and would you change anything? Also, what size Teleflex
was
-> > used and how and where did you attach it to the flap control tube?
-> > Thanks to anyone with the info.
-> >
-> > Tom Packard
-> > SR 043
-> >
-> >
-> >
-> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> $8.99/mo! ------
-> >
-> >
-> >
-> >
->

*-------------------------------------------------------------------------*

-> > To unsubscribe from this list go to:
-> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > Archives located at https://www.dcsol.com/default.htm
-> > Archives public username "rebel" password "builder"
-> > To contact the list admin, e-mail mike.davis@dcsol.com
-> >
->

*-------------------------------------------------------------------------*

-> >
-> >
-> >
-> >
->
->
->
->
->

*-------------------------------------------------------------------------*

-> To unsubscribe from this list go to:
-> https://www.dcsol.com/public/code/html-subscribe.wcx
-> Archives located at https://www.dcsol.com/default.htm
-> Archives public username "rebel" password "builder"
-> To contact the list admin, e-mail mike.davis@dcsol.com
->

*-------------------------------------------------------------------------*

->
->
->
->
->
->
-> ----- End of Forwarded Message -----
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[steveh]

Al:

Thanks for the pictures and the quick reply to my post! ! ! !
I'll be doing this mod to our moose. Looks like a nice install and will save
cutting the roof and the cable in the centre of the rear fus. Will make it a
lot easyer to get to the back to do any work.

By the way, it was nice to talk to you at OSH at the Fri. dinner. Should have
said this before.

Steve H
Moose 213

->
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Wednesday, November 03, 2004 4:54 AM
-> Subject: Re: SR and Moose flaps
->
->
-> > Al:
-> >
-> > Found this in the archives. Did you ever up load any pictures of this
-> > install? ? ? If not, could you upload some.
-> >
-> > Could you post any info on this install? Very interested in doing the
-> > same
-> > thing to our Moose. Any info would be great. Where to get this cable,
-> > length, ect.
-> >
-> > Thanks
-> > Steve H
-> > Moose 213
-> >
-> >
-> >
-> > ->
-> > -> Hi Tom,
-> > -> Yes, I used a Teleflex cable and it works good. The flaps deploy when
-> > the
-> > -> cable is pulled. The raising of the flaps is pushing on the cable, so
I
-> > did
-> > -> add one spring to help the cable. I will post a picture out of the
-> > -> bellcrank mechanism where it attaches to the flaptube and Teleflex. I
-> > will
-> > -> measure the Teleflex tomorrow and let you know the length, but a little
-> > -> extra length is not a problem.
-> > -> Al
-> > -> ----- Original Message -----
-> > -> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> > -> To: <murphy-rebel@dcsol.com>
-> > -> Sent: Thursday, March 11, 2004 8:32 AM
-> > -> Subject: SR and Moose flaps
-> > ->
-> > ->
-> > -> > Some time ago, someone (I think Al Paxia) was going to try using
-> > -> > Teleflex cable on a floor mounted flap handle for a SR or Moose. I
-> > -> > would also like to eliminate the pulleys and slot with fairing on top
-> > -> > and think the Teleflex cable would work. Has anyone tried this and
-> > do
-> > -> > you have any photos or sketches of the installation? How has it
-> > -> > performed and would you change anything? Also, what size Teleflex
-> > was
-> > -> > used and how and where did you attach it to the flap control tube?
-> > -> > Thanks to anyone with the info.
-> > -> >
-> > -> > Tom Packard
-> > -> > SR 043
-> > -> >
-> > -> >
-> > -> >
-> > -> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> > -> $8.99/mo! ------
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > *-------------------------------------------------------------------------
*
-> > -> > To unsubscribe from this list go to:
-> > -> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > -> > Archives located at https://www.dcsol.com/default.htm
-> > -> > Archives public username "rebel" password "builder"
-> > -> > To contact the list admin, e-mail mike.davis@dcsol.com
-> > -> >
-> > ->
-> > *-------------------------------------------------------------------------
*
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > ->
-> > ->
-> > ->
-> > ->
-> > *-------------------------------------------------------------------------
*
-> > -> To unsubscribe from this list go to:
-> > -> https://www.dcsol.com/public/code/html-subscribe.wcx
-> > -> Archives located at https://www.dcsol.com/default.htm
-> > -> Archives public username "rebel" password "builder"
-> > -> To contact the list admin, e-mail mike.davis@dcsol.com
-> > ->
-> > *-------------------------------------------------------------------------
*
-> > ->
-> > ->
-> > ->
-> > ->
-> > ->
-> > ->
-> > -> ----- End of Forwarded Message -----
-> > ->
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Dale Fultz]

Hi Al, Read your post on the flap cable , how do you get from the flap
handle to the top if you don't access the rear of the fuselage it sounds to
me also like a good idea but I need some more information . Thanks Dale
----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 12:55 PM
Subject: Re: SR and Moose flaps

Hi Steve,
I just posted a couple of old pictures. The Teleflex is a marine engine
control cable and follows the path from the flap handle to the flap tube

in

a sweeping 180 degree turn. I used the bellcrank to change direction so

the

pull stroke deployed the flaps and push on the cable did the retraction.
System has been flawless for over 400 hours and over 300 landings.
Al

----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 4:54 AM
Subject: Re: SR and Moose flaps

Al:

Found this in the archives. Did you ever up load any pictures of this
install? ? ? If not, could you upload some.

Could you post any info on this install? Very interested in doing the
same
thing to our Moose. Any info would be great. Where to get this cable,
length, ect.

Thanks
Steve H
Moose 213



->
-> Hi Tom,
-> Yes, I used a Teleflex cable and it works good. The flaps deploy when
the
-> cable is pulled. The raising of the flaps is pushing on the cable, so

I

did
-> add one spring to help the cable. I will post a picture out of the
-> bellcrank mechanism where it attaches to the flaptube and Teleflex. I
will
-> measure the Teleflex tomorrow and let you know the length, but a

little

-> extra length is not a problem.
-> Al
-> ----- Original Message -----
-> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> To: <murphy-rebel@dcsol.com>
-> Sent: Thursday, March 11, 2004 8:32 AM
-> Subject: SR and Moose flaps
->
->
-> > Some time ago, someone (I think Al Paxia) was going to try using
-> > Teleflex cable on a floor mounted flap handle for a SR or Moose. I
-> > would also like to eliminate the pulleys and slot with fairing on

top

-> > and think the Teleflex cable would work. Has anyone tried this and
do
-> > you have any photos or sketches of the installation? How has it
-> > performed and would you change anything? Also, what size Teleflex
was
-> > used and how and where did you attach it to the flap control tube?
-> > Thanks to anyone with the info.
-> >
-> > Tom Packard
-> > SR 043
-> >
-> >
-> >
-> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> $8.99/mo! ------
-> >
-> >
-> >
-> >
->

*-------------------------------------------------------------------------*

-> > To unsubscribe from this list go to:
-> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > Archives located at https://www.dcsol.com/default.htm
-> > Archives public username "rebel" password "builder"
-> > To contact the list admin, e-mail mike.davis@dcsol.com
-> >
->

*-------------------------------------------------------------------------*

-> >
-> >
-> >
-> >
->
->
->
->
->

*-------------------------------------------------------------------------*

-> To unsubscribe from this list go to:
-> https://www.dcsol.com/public/code/html-subscribe.wcx
-> Archives located at https://www.dcsol.com/default.htm
-> Archives public username "rebel" password "builder"
-> To contact the list admin, e-mail mike.davis@dcsol.com
->

*-------------------------------------------------------------------------*

->
->
->
->
->
->
-> ----- End of Forwarded Message -----
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Hi Dale,
I do access the rear fuselage, under the floor to the tailcone. The Teleflex
cable just stays inside the fuselage and lays against the side of the
tailcone and back to the flap tube up in the corner wrap.
Al
----- Original Message -----
From: "Dale Fultz" <dfultz@countryilink.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 11:23 AM
Subject: Re: SR and Moose flaps

Hi Al, Read your post on the flap cable , how do you get from the flap
handle to the top if you don't access the rear of the fuselage it sounds
to
me also like a good idea but I need some more information . Thanks Dale
----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 12:55 PM
Subject: Re: SR and Moose flaps

Hi Steve,
I just posted a couple of old pictures. The Teleflex is a marine engine
control cable and follows the path from the flap handle to the flap tube

in

a sweeping 180 degree turn. I used the bellcrank to change direction so

the

pull stroke deployed the flaps and push on the cable did the retraction.
System has been flawless for over 400 hours and over 300 landings.
Al

----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 4:54 AM
Subject: Re: SR and Moose flaps

Al:

Found this in the archives. Did you ever up load any pictures of this
install? ? ? If not, could you upload some.

Could you post any info on this install? Very interested in doing the
same
thing to our Moose. Any info would be great. Where to get this cable,
length, ect.

Thanks
Steve H
Moose 213



->
-> Hi Tom,
-> Yes, I used a Teleflex cable and it works good. The flaps deploy
when
the
-> cable is pulled. The raising of the flaps is pushing on the cable,
so

I

did
-> add one spring to help the cable. I will post a picture out of the
-> bellcrank mechanism where it attaches to the flaptube and Teleflex.
I
will
-> measure the Teleflex tomorrow and let you know the length, but a

little

-> extra length is not a problem.
-> Al
-> ----- Original Message -----
-> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> To: <murphy-rebel@dcsol.com>
-> Sent: Thursday, March 11, 2004 8:32 AM
-> Subject: SR and Moose flaps
->
->
-> > Some time ago, someone (I think Al Paxia) was going to try using
-> > Teleflex cable on a floor mounted flap handle for a SR or Moose.
I
-> > would also like to eliminate the pulleys and slot with fairing on

top

-> > and think the Teleflex cable would work. Has anyone tried this
and
do
-> > you have any photos or sketches of the installation? How has it
-> > performed and would you change anything? Also, what size
Teleflex
was
-> > used and how and where did you attach it to the flap control tube?
-> > Thanks to anyone with the info.
-> >
-> > Tom Packard
-> > SR 043
-> >
-> >
-> >
-> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> $8.99/mo! ------
-> >
-> >
-> >
-> >
->

*-------------------------------------------------------------------------*

-> > To unsubscribe from this list go to:
-> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > Archives located at https://www.dcsol.com/default.htm
-> > Archives public username "rebel" password "builder"
-> > To contact the list admin, e-mail mike.davis@dcsol.com
-> >
->

*-------------------------------------------------------------------------*

-> >
-> >
-> >
-> >
->
->
->
->
->

*-------------------------------------------------------------------------*

-> To unsubscribe from this list go to:
-> https://www.dcsol.com/public/code/html-subscribe.wcx
-> Archives located at https://www.dcsol.com/default.htm
-> Archives public username "rebel" password "builder"
-> To contact the list admin, e-mail mike.davis@dcsol.com
->

*-------------------------------------------------------------------------*

->
->
->
->
->
->
-> ----- End of Forwarded Message -----
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Steve,
Your welcome, its always fun to talk face to face. Let us know how it goes.
Al
----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 10:43 AM
Subject: Re: SR and Moose flaps

Al:

Thanks for the pictures and the quick reply to my post! ! ! !
I'll be doing this mod to our moose. Looks like a nice install and will
save
cutting the roof and the cable in the centre of the rear fus. Will make
it a
lot easyer to get to the back to do any work.

By the way, it was nice to talk to you at OSH at the Fri. dinner. Should
have
said this before.

Steve H
Moose 213

->
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Wednesday, November 03, 2004 4:54 AM
-> Subject: Re: SR and Moose flaps
->
->
-> > Al:
-> >
-> > Found this in the archives. Did you ever up load any pictures of
this
-> > install? ? ? If not, could you upload some.
-> >
-> > Could you post any info on this install? Very interested in doing
the
-> > same
-> > thing to our Moose. Any info would be great. Where to get this
cable,
-> > length, ect.
-> >
-> > Thanks
-> > Steve H
-> > Moose 213
-> >
-> >
-> >
-> > ->
-> > -> Hi Tom,
-> > -> Yes, I used a Teleflex cable and it works good. The flaps deploy
when
-> > the
-> > -> cable is pulled. The raising of the flaps is pushing on the cable,
so
I
-> > did
-> > -> add one spring to help the cable. I will post a picture out of
the
-> > -> bellcrank mechanism where it attaches to the flaptube and
Teleflex. I
-> > will
-> > -> measure the Teleflex tomorrow and let you know the length, but a
little
-> > -> extra length is not a problem.
-> > -> Al
-> > -> ----- Original Message -----
-> > -> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> > -> To: <murphy-rebel@dcsol.com>
-> > -> Sent: Thursday, March 11, 2004 8:32 AM
-> > -> Subject: SR and Moose flaps
-> > ->
-> > ->
-> > -> > Some time ago, someone (I think Al Paxia) was going to try using
-> > -> > Teleflex cable on a floor mounted flap handle for a SR or Moose.
I
-> > -> > would also like to eliminate the pulleys and slot with fairing
on top
-> > -> > and think the Teleflex cable would work. Has anyone tried this
and
-> > do
-> > -> > you have any photos or sketches of the installation? How has it
-> > -> > performed and would you change anything? Also, what size
Teleflex
-> > was
-> > -> > used and how and where did you attach it to the flap control
tube?
-> > -> > Thanks to anyone with the info.
-> > -> >
-> > -> > Tom Packard
-> > -> > SR 043
-> > -> >
-> > -> >
-> > -> >
-> > -> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> > -> $8.99/mo! ------
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> >
*-------------------------------------------------------------------------
*
-> > -> > To unsubscribe from this list go to:
-> > -> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > -> > Archives located at https://www.dcsol.com/default.htm
-> > -> > Archives public username "rebel" password "builder"
-> > -> > To contact the list admin, e-mail mike.davis@dcsol.com
-> > -> >
-> > ->
-> >
*-------------------------------------------------------------------------
*
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > ->
-> > ->
-> > ->
-> > ->
-> >
*-------------------------------------------------------------------------
*
-> > -> To unsubscribe from this list go to:
-> > -> https://www.dcsol.com/public/code/html-subscribe.wcx
-> > -> Archives located at https://www.dcsol.com/default.htm
-> > -> Archives public username "rebel" password "builder"
-> > -> To contact the list admin, e-mail mike.davis@dcsol.com
-> > ->
-> >
*-------------------------------------------------------------------------
*
-> > ->
-> > ->
-> > ->
-> > ->
-> > ->
-> > ->
-> > -> ----- End of Forwarded Message -----
-> > ->
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Hi Scott,
I have not heard anything about flap torque rivets being a problem. The last
time I looked in that area was last Feb. so I will check this week. I plan
to take the floats off next week. The field is getting a little mushy for
amphibs. Takeoff and landings are fine but taxiing in soft ground tends to
plow two rows in the taxiway from the nose wheels.
Al
----- Original Message -----
From: "Scott Aldrich" <sa@mwutah.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 10:07 AM
Subject: RE: SR and Moose flaps

Al, yours has to be one of the higher time SR/Moose out there. Any issue
with the flap torque tube rivets? Have you heard anything about it? I
haven't finalized that part yet so I may just redesign to eliminate the
riveted tube if it is a problem.

Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Al
Paxhia
Sent: Wednesday, November 03, 2004 10:55 AM
To: rebel-builders@dcsol.com
Subject: Re: SR and Moose flaps

Hi Steve,
I just posted a couple of old pictures. The Teleflex is a marine engine
control cable and follows the path from the flap handle to the flap tube
in
a sweeping 180 degree turn. I used the bellcrank to change direction so
the
pull stroke deployed the flaps and push on the cable did the retraction.
System has been flawless for over 400 hours and over 300 landings.
Al

----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 03, 2004 4:54 AM
Subject: Re: SR and Moose flaps

Al:

Found this in the archives. Did you ever up load any pictures of this
install? ? ? If not, could you upload some.

Could you post any info on this install? Very interested in doing the
same
thing to our Moose. Any info would be great. Where to get this cable,
length, ect.

Thanks
Steve H
Moose 213



->
-> Hi Tom,
-> Yes, I used a Teleflex cable and it works good. The flaps deploy when
the
-> cable is pulled. The raising of the flaps is pushing on the cable, so
I

did
-> add one spring to help the cable. I will post a picture out of the
-> bellcrank mechanism where it attaches to the flaptube and Teleflex. I
will
-> measure the Teleflex tomorrow and let you know the length, but a
little
-> extra length is not a problem.
-> Al
-> ----- Original Message -----
-> From: "Tom and Joy Packard" <jtpackard@usfamily.net>
-> To: <murphy-rebel@dcsol.com>
-> Sent: Thursday, March 11, 2004 8:32 AM
-> Subject: SR and Moose flaps
->
->
-> > Some time ago, someone (I think Al Paxia) was going to try using
-> > Teleflex cable on a floor mounted flap handle for a SR or Moose. I
-> > would also like to eliminate the pulleys and slot with fairing on
top
-> > and think the Teleflex cable would work. Has anyone tried this and
do
-> > you have any photos or sketches of the installation? How has it
-> > performed and would you change anything? Also, what size Teleflex
was
-> > used and how and where did you attach it to the flap control tube?
-> > Thanks to anyone with the info.
-> >
-> > Tom Packard
-> > SR 043
-> >
-> >
-> >
-> > ------ http://USFamily.Net/info - Unlimited Internet - From
-> $8.99/mo! ------
-> >
-> >
-> >
-> >
->

*-------------------------------------------------------------------------*

-> > To unsubscribe from this list go to:
-> > https://www.dcsol.com/public/code/html-subscribe.wcx
-> > Archives located at https://www.dcsol.com/default.htm
-> > Archives public username "rebel" password "builder"
-> > To contact the list admin, e-mail mike.davis@dcsol.com
-> >
->

*-------------------------------------------------------------------------*

-> >
-> >
-> >
-> >
->
->
->
->
->

*-------------------------------------------------------------------------*

-> To unsubscribe from this list go to:
-> https://www.dcsol.com/public/code/html-subscribe.wcx
-> Archives located at https://www.dcsol.com/default.htm
-> Archives public username "rebel" password "builder"
-> To contact the list admin, e-mail mike.davis@dcsol.com
->

*-------------------------------------------------------------------------*

->
->
->
->
->
->
-> ----- End of Forwarded Message -----
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------