Landing Lamp Connection

[David Ricker]

Hi

We don't have the bulbs yet, can anybody tell me the size of the screw that is
used to connect the 4509 landing lamp bulb wiring?

Thanks

Dave

--
David A. Ricker
Fall River, Nova Scotia
Canada





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Dave, was hoping someone else would take up the slack and answer some of
these... so I can get some work done around here!

Pretty sure they're 10-32!
Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, January 11, 2004 10:23 AM
Subject: Landing Lamp Connection

Hi

We don't have the bulbs yet, can anybody tell me the size of the screw

that is

used to connect the 4509 landing lamp bulb wiring?

Thanks

Dave

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[David Ricker]

Hi Wayne

Thanks for interrupting for a moment, hard to believe there isn't any info on
the manufacturers web sites or Aircraft Spruce about this either.

Cheers,

Dave

"Wayne G. O'Shea" wrote:

Dave, was hoping someone else would take up the slack and answer some of
these... so I can get some work done around here!

Pretty sure they're 10-32!
Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, January 11, 2004 10:23 AM
Subject: Landing Lamp Connection

Hi

We don't have the bulbs yet, can anybody tell me the size of the screw

that is

used to connect the 4509 landing lamp bulb wiring?

Thanks

Dave

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[George Coy]

Dave,
I went out and pulled one from the stock room and found it has an 8-32 X
1/4 inch brass plated steel screw with a head that accepts a Phillips or a
normal slotted head screw driver.
George

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
David Ricker
Sent: Tuesday, January 13, 2004 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Landing Lamp Connection


Hi Wayne

Thanks for interrupting for a moment, hard to believe there isn't any info
on
the manufacturers web sites or Aircraft Spruce about this either.

Cheers,

Dave

"Wayne G. O'Shea" wrote:

Dave, was hoping someone else would take up the slack and answer some of
these... so I can get some work done around here!

Pretty sure they're 10-32!
Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, January 11, 2004 10:23 AM
Subject: Landing Lamp Connection

Hi

We don't have the bulbs yet, can anybody tell me the size of the screw

that is

used to connect the 4509 landing lamp bulb wiring?

Thanks

Dave

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*







*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Guess it was the large head that threw me off thinking 10-32 ! Thanks for
giving Dave the correct answer George!
Wayne

----- Original Message -----
From: "George Coy" <george@gesoco.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, January 14, 2004 8:40 AM
Subject: RE: Landing Lamp Connection

Dave,
I went out and pulled one from the stock room and found it has an 8-32 X
1/4 inch brass plated steel screw with a head that accepts a Phillips or a
normal slotted head screw driver.
George

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
David Ricker
Sent: Tuesday, January 13, 2004 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Landing Lamp Connection


Hi Wayne

Thanks for interrupting for a moment, hard to believe there isn't any info
on
the manufacturers web sites or Aircraft Spruce about this either.

Cheers,

Dave

"Wayne G. O'Shea" wrote:

Dave, was hoping someone else would take up the slack and answer some of
these... so I can get some work done around here!

Pretty sure they're 10-32!
Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, January 11, 2004 10:23 AM
Subject: Landing Lamp Connection

Hi

We don't have the bulbs yet, can anybody tell me the size of the screw

that is

used to connect the 4509 landing lamp bulb wiring?

Thanks

Dave

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Now Now Dave! I can still see out of one eye and hear out of the opposite
ear! Just haven't looked at a "proper" wing bulb in a VERY long time (since
I got rid of my C182 in 1995!) as it's been all halogen driving lights ever
since (with never needing to replace one yet in 8+ years.... as opposed to
every couple months with my 182!).

Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, January 14, 2004 8:12 PM
Subject: Re: Landing Lamp Connection

Hi George

I was thinking that #10 was a bit big for the job but since I was the one
asking the question I figured I should clam up unitl I knew what I was

talking

about! Think we'll have to take up a collection & get Wayne some

bi-focals?

:^0

Thanks for fessin' up Wayne!

Cheers,

Dave



George Coy wrote:

Dave,
I went out and pulled one from the stock room and found it has an 8-32

X

1/4 inch brass plated steel screw with a head that accepts a Phillips or

a

normal slotted head screw driver.
George

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
David Ricker
Sent: Tuesday, January 13, 2004 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Landing Lamp Connection

Hi Wayne

Thanks for interrupting for a moment, hard to believe there isn't any

info

on
the manufacturers web sites or Aircraft Spruce about this either.

Cheers,

Dave

"Wayne G. O'Shea" wrote:

Dave, was hoping someone else would take up the slack and answer some

of

these... so I can get some work done around here!

Pretty sure they're 10-32!
Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, January 11, 2004 10:23 AM
Subject: Landing Lamp Connection

screw

that is

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[David Ricker]

Hi George

I was thinking that #10 was a bit big for the job but since I was the one
asking the question I figured I should clam up unitl I knew what I was talking
about! Think we'll have to take up a collection & get Wayne some bi-focals?
:^0

Thanks for fessin' up Wayne!

Cheers,

Dave



George Coy wrote:

Dave,
I went out and pulled one from the stock room and found it has an 8-32 X
1/4 inch brass plated steel screw with a head that accepts a Phillips or a
normal slotted head screw driver.
George

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
David Ricker
Sent: Tuesday, January 13, 2004 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Landing Lamp Connection

Hi Wayne

Thanks for interrupting for a moment, hard to believe there isn't any info
on
the manufacturers web sites or Aircraft Spruce about this either.

Cheers,

Dave

"Wayne G. O'Shea" wrote:

Dave, was hoping someone else would take up the slack and answer some of
these... so I can get some work done around here!

Pretty sure they're 10-32!
Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, January 11, 2004 10:23 AM
Subject: Landing Lamp Connection

Hi

We don't have the bulbs yet, can anybody tell me the size of the screw

that is

used to connect the 4509 landing lamp bulb wiring?

Thanks

Dave

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[David Ricker]

Wayne

OK, hee hee, we'll let you off this time but just because you are a good guy and
a font of knowledge (not to mention a good sport!) ;^)

Cheers,

Dave

"Wayne G. O'Shea" wrote:

Now Now Dave! I can still see out of one eye and hear out of the opposite
ear! Just haven't looked at a "proper" wing bulb in a VERY long time (since
I got rid of my C182 in 1995!) as it's been all halogen driving lights ever
since (with never needing to replace one yet in 8+ years.... as opposed to
every couple months with my 182!).

Wayne

----- Original Message -----
From: "David Ricker" <ricker@inherentsys.ca>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, January 14, 2004 8:12 PM
Subject: Re: Landing Lamp Connection

Hi George

I was thinking that #10 was a bit big for the job but since I was the one
asking the question I figured I should clam up unitl I knew what I was

talking

about! Think we'll have to take up a collection & get Wayne some

bi-focals?

:^0

Thanks for fessin' up Wayne!

Cheers,

Dave



George Coy wrote:

Dave,
I went out and pulled one from the stock room and found it has an 8-32

X

1/4 inch brass plated steel screw with a head that accepts a Phillips or

a

normal slotted head screw driver.
George

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
David Ricker
Sent: Tuesday, January 13, 2004 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Landing Lamp Connection

Hi Wayne

Thanks for interrupting for a moment, hard to believe there isn't any

info

on
the manufacturers web sites or Aircraft Spruce about this either.

Cheers,

Dave

"Wayne G. O'Shea" wrote:

of

screw

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

--
David A. Ricker
Fall River, Nova Scotia
Canada





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------