Sealant safe paint stripper?

[Al & Deb Paxhia]

Scott,
My experience with paint strippers is they only take a layer or two of
paint. If you take care around the seams there should not be a problem with
stripping to deep. Do a test strip in an area that does not matter.
The stripper that I have used is a Methyl Chloride base and is as bad as it
gets for a health hazard. There is other stripper out there but I don't know
what they are.
Al
----- Original Message -----
From: "Scott & Leere' Aldrich" <flynski@mwutah.com>
To: <murphy-rebel@dcsol.com>
Sent: Thursday, July 24, 2003 11:23 AM
Subject: Sealant safe paint stripper?

Anyone know of paint stripper that could be used on floats and not mess up
the sealed seams?

Or have ideas on stripping floats?

Thanks,
Scott

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[James Vandolder]

Try this !

http://www.napiere.com/markets/aviation.htm

Their product is water based, biodegradable, and
non-toxic, and supposedly works well!

I have not tried this stuff personally, but I have
talked to the factory, and the next time we strip an
entire aircraft, we sure are going to give it a try.

James


--- Scott & Leere' Aldrich <flynski@mwutah.com> wrote:

Anyone know of paint stripper that could be used on
floats and not mess up
the sealed seams?

Or have ideas on stripping floats?

Thanks,
Scott

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:

http://www.dcsol.com:81/public/code/html-subscribe.wcx

Archives located at
http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail
mike.davis@dcsol.com

*-------------------------------------------------------------------------*


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com


*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------