Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

LS1 Motor Mount

Converted from Wildcat! database. (read only)
Locked
Reed, Britt/FSC Salt Lake

LS1 Motor Mount

Post by Reed, Britt/FSC Salt Lake » Fri Feb 17, 2012 11:08 pm

I was up in Idaho last weekend and got to see Chuck's LS1 running on its
test mount - Really sweet!! He would be willing to put together an LS1
engine mount for the SR- he needs the bolt attach pattern and thrust line
offsets- I think he tack welds the frame and sends it to California to have
it welded up on a vibratory table - something about a German system of
relieving the stresses in the weld as the puddle crystallizes.

Britt - SR194



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Reed, Britt/FSC Salt Lake

LS1 Motor Mount

Post by Reed, Britt/FSC Salt Lake » Fri Feb 17, 2012 11:08 pm

Good one - It all fits except Harleys are hard to come by in Germany and the
BMWs mignt not deliver the necessary Vibes -
There does appear to be some science behind it -
http://ceer.alfred.edu/research/vibratory.html

Britt


-----Original Message-----
From: Bill Delcambre [mailto:bdelcambre@cox-internet.com]
Sent: Thursday, May 29, 2003 7:55 AM
To: murphy-rebel@dcsol.com
Subject: Re: LS1 Motor Mount

I think he tack welds the frame and sends it to California to have
it welded up on a vibratory table - something about a German system of
relieving the stresses in the weld as the puddle crystallizes.
I'm conjuring up an image of a fellow, sitting on an idling Harley, holding
a TIG torch, as the mount jiggles around. Also imagining all sorts of names
for the process... Gudenluse Weldin Haus...

Sorry, I gotta stop that..

Bill





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Bill Delcambre

LS1 Motor Mount

Post by Bill Delcambre » Fri Feb 17, 2012 11:08 pm

I think he tack welds the frame and sends it to California to have
it welded up on a vibratory table - something about a German system of
relieving the stresses in the weld as the puddle crystallizes.
I'm conjuring up an image of a fellow, sitting on an idling Harley, holding
a TIG torch, as the mount jiggles around. Also imagining all sorts of names
for the process... Gudenluse Weldin Haus...

Sorry, I gotta stop that..

Bill





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
rickhm

LS1 Motor Mount

Post by rickhm » Fri Feb 17, 2012 11:08 pm

Did he hint at a cost for this mount?

Rick
-------Original Message-------
From: "Reed, Britt/FSC Salt Lake" <BReed@slcrail.com>
Sent: 05/29/03 09:08 AM
To: murphy-rebel@dcsol.com
Subject: RE: LS1 Motor Mount
Good one - It all fits except Harleys are hard to come by in Germany and
the
BMWs mignt not deliver the necessary Vibes -
There does appear to be some science behind it -
http://ceer.alfred.edu/research/vibratory.html

Britt


-----Original Message-----
From: Bill Delcambre [mailto:bdelcambre@cox-internet.com]
Sent: Thursday, May 29, 2003 7:55 AM
To: murphy-rebel@dcsol.com
Subject: Re: LS1 Motor Mount

I think he tack welds the frame and sends it to California to have
it welded up on a vibratory table - something about a German system of
relieving the stresses in the weld as the puddle crystallizes.
I'm conjuring up an image of a fellow, sitting on an idling Harley,
holding
a TIG torch, as the mount jiggles around. Also imagining all sorts of
names
for the process... Gudenluse Weldin Haus...

Sorry, I gotta stop
that..

Bill





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”