vortex generators

Mike Davis · Post by **Mike Davis** » Fri Feb 17, 2012 10:56 pm

I just did a quick search of the archives... searched for "vortex" in the
message body. Found 19 in murphy-rebel and 10 more in old-murphy-rebel.
You'd probably get additional hits if you searched for "VG". I do recall
this topic being discussed several times in the past... both positive and
negative comments have been shared. And as Bobp always shares... as long as
you don't flush rivet your wings... there's already thousands of little VGs
all over it.

Mike

----- Original Message -----
From: <rickhm@mindspring.com>
To: <murphy-rebel@dcsol.com>
Sent: Monday, April 21, 2003 9:00 AM
Subject: Re: vortex generators

Peter,

I have done a little research, but with little success. If you learn

anything I would love to hear !

Rick Muller
SR 70

-------Original Message-------
From: capete@golden.net
Sent: 04/21/03 06:29 AM
To: murphy-rebel@dcsol.com
Subject: vortex generators

Anyone out there have any experience with vortex generators on their
airplanes who could comment on their
performance.

Peter
SR003

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
<a target=_blank

href="http://www.dcsol.com:81/public/code/htm ... ://www.dcs
ol.com:81/public/code/html-subscribe.wcx</a>

Archives located at <a target=_blank

href="http://rebel:builder@www.dcsol.com:81/d ... bel:builde
r@www.dcsol.com:81/default.htm</a>

To contact the list admin, e-mail
mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

capete · Post by **capete** » Fri Feb 17, 2012 10:56 pm

Anyone out there have any experience with vortex generators on their
airplanes who could comment on their performance.

Peter
SR003

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

rickhm · Post by **rickhm** » Fri Feb 17, 2012 10:56 pm

Peter,

I have done a little research, but with little success. If you learn anything I would love to hear !

Rick Muller
SR 70

-------Original Message-------
From: capete@golden.net
Sent: 04/21/03 06:29 AM
To: murphy-rebel@dcsol.com
Subject: vortex generators

Anyone out there have any experience with vortex generators on their

airplanes who could comment on their
performance.

Peter
SR003

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
<a target=_blank
href="http://www.dcsol.com:81/public/code/htm ... ibe.wcx</a>
Archives located at <a target=_blank
href="http://rebel:builder@www.dcsol.com:81/d ... ult.htm</a>
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Keith Oliver · Post by **Keith Oliver** » Fri Feb 17, 2012 10:56 pm

DITTO

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
rickhm@mindspring.com
Sent: Monday, April 21, 2003 1:01 PM
To: murphy-rebel@dcsol.com
Subject: Re: vortex generators

Peter,

I have done a little research, but with little success. If you learn
anything I would love to hear !

Rick Muller
SR 70

-------Original Message-------
From: capete@golden.net
Sent: 04/21/03 06:29 AM
To: murphy-rebel@dcsol.com
Subject: vortex generators

Anyone out there have any experience with vortex generators on their

airplanes who could comment on their
performance.

Peter
SR003

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
<a target=_blank
href="http://www.dcsol.com:81/public/code/htm ... ://www.dcs
ol.com:81/public/code/html-subscribe.wcx</a>
Archives located at <a target=_blank
href="http://rebel:builder@www.dcsol.com:81/d ... bel:builde
r@www.dcsol.com:81/default.htm</a>
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

camoose · Post by **camoose** » Fri Feb 17, 2012 10:56 pm

I recall that Bob Howell has VG's installed on his Moose which is located in
Carson City, NV. I'll check with him and see if he has any comments.

Regards, SR227 (Deposit and awaiting delivery)

On 4/22/2003 2:17 PM, CAPETE@GOLDEN.NET wrote to MURPHY-REBEL:

-> From <capete@golden.net> Mon, 21 Apr 2003 04:29:44 -0800 remote from
dcsol.com
-> Received: by dcsol.com (Wildcat! SMTP Router v5.6.450.61)
-> for murphy-rebel@dcsol.com; Mon, 21 Apr 2003 04:29:44 -0800
-> Received: from niobium.golden.net ([199.166.210.90]) EHLO=niobium.golden.net
-> by dcsol.com (Wildcat! SMTP v5.6.450.61) with SMTP
-> id 62425000; Mon, 21 Apr 2003 04:29:43 -0800
-> Received: from r2d2 (AS53-01-57.cas-gue.golden.net [207.35.144.57])
-> by niobium.golden.net (8.11.6/8.10.1) with SMTP id h3LCTm304218
-> for <murphy-rebel@dcsol.com>; Mon, 21 Apr 2003 08:29:48 -0400 (EDT)
-> Message-ID: <000701c30801$b3fe68d0$528dfea9@r2d2>
-> From: <capete@golden.net>
-> To: <murphy-rebel@dcsol.com>
-> Subject: vortex generators
-> Date: Mon, 21 Apr 2003 08:29:48 -0400
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: text/plain; charset="iso-8859-1"
-> X-Orig-Content-Transfer-Encoding: 7bit
-> X-Priority: 3
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook Express 5.50.4807.1700
-> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
->
-> Anyone out there have any experience with vortex generators on their
-> airplanes who could comment on their performance.
->
-> Peter
-> SR003
->

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

rickjohnson · Post by **rickjohnson** » Sat Feb 18, 2012 9:58 am

If anyone has put vortex generators on the mooose or knows about them can you
comment on the before and after performance change, if any?

Thanks,

Rick 277SR

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ryan Mowat · Post by **Ryan Mowat** » Sat Feb 18, 2012 9:58 am

Love them. The new wing tips and VG together bring stall speed on
floats from 57 knots to under 45 knots at gross.

Ryan Mowat, P.Eng.
30528 1A Greatnorthern Ave
Abbotsford, BC V2T 6H4
(604) 556-7222 (ext 307), (604) 556-7215 (Fax)

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rickjohnson@dcsol.com
Sent: Tuesday, January 04, 2005 11:17 PM
To: rebel-builders@dcsol.com
Subject: Vortex Generators

If anyone has put vortex generators on the mooose or knows about them
can you
comment on the before and after performance change, if any?

Thanks,

Rick 277SR

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Al Paxhia · Post by **Al Paxhia** » Sat Feb 18, 2012 9:58 am

Rick,
I have installed them and they work great.The stall with the VG's is off
the scale on the airspeed indicator. The airplane fly's slower and has
aileron control with full flaps. It had hardly any aileron control with full
flaps prior to adding the VG's.
I also have put VG's on the underside of the horizontal stabilizer, this
gave me more elevator authority, it needed that to get it to stall.
Talk to Jerry at http://www.pnwaero.com/ nice kit and very helpful, he has
several Moose's with his VG's, his phone is 541-388-9902.
Al
Moose, N526AP
----- Original Message -----
From: <rickjohnson@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, January 04, 2005 11:17 PM
Subject: Vortex Generators

If anyone has put vortex generators on the mooose or knows about them can
you
comment on the before and after performance change, if any?

Thanks,

Rick 277SR

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 9:58 am

Al...does the pretested kit from Jerry, for the Moose, come with the Stab
VG's or were/are they extra order on top? Thanks, Wayne

----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 1:20 PM
Subject: Re: Vortex Generators

Rick,
I have installed them and they work great.The stall with the VG's is off
the scale on the airspeed indicator. The airplane fly's slower and has
aileron control with full flaps. It had hardly any aileron control with

full

flaps prior to adding the VG's.
I also have put VG's on the underside of the horizontal stabilizer, this
gave me more elevator authority, it needed that to get it to stall.
Talk to Jerry at http://www.pnwaero.com/ nice kit and very helpful, he

has

several Moose's with his VG's, his phone is 541-388-9902.
Al
Moose, N526AP
----- Original Message -----
From: <rickjohnson@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, January 04, 2005 11:17 PM
Subject: Vortex Generators

If anyone has put vortex generators on the mooose or knows about them

can

you
comment on the before and after performance change, if any?

Thanks,

Rick 277SR

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Al Paxhia · Post by **Al Paxhia** » Sat Feb 18, 2012 9:58 am

Hi Wayne,
Yes, it's all one package. Al
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 10:34 AM
Subject: Re: Vortex Generators

Al...does the pretested kit from Jerry, for the Moose, come with the Stab
VG's or were/are they extra order on top? Thanks, Wayne

----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 1:20 PM
Subject: Re: Vortex Generators

Rick,
I have installed them and they work great.The stall with the VG's is off
the scale on the airspeed indicator. The airplane fly's slower and has
aileron control with full flaps. It had hardly any aileron control with
full
flaps prior to adding the VG's.
I also have put VG's on the underside of the horizontal stabilizer, this
gave me more elevator authority, it needed that to get it to stall.
Talk to Jerry at http://www.pnwaero.com/ nice kit and very helpful, he
has
several Moose's with his VG's, his phone is 541-388-9902.
Al
Moose, N526AP
----- Original Message -----
From: <rickjohnson@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, January 04, 2005 11:17 PM
Subject: Vortex Generators

If anyone has put vortex generators on the mooose or knows about them
can
you
comment on the before and after performance change, if any?

Thanks,

Rick 277SR

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 9:58 am

THANKS!

----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 2:13 PM
Subject: Re: Vortex Generators

Hi Wayne,
Yes, it's all one package. Al
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 10:34 AM
Subject: Re: Vortex Generators

Al...does the pretested kit from Jerry, for the Moose, come with the

Stab

VG's or were/are they extra order on top? Thanks, Wayne

----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 1:20 PM
Subject: Re: Vortex Generators

Rick,
I have installed them and they work great.The stall with the VG's is

off

the scale on the airspeed indicator. The airplane fly's slower and has
aileron control with full flaps. It had hardly any aileron control with
full
flaps prior to adding the VG's.
I also have put VG's on the underside of the horizontal stabilizer,

this

gave me more elevator authority, it needed that to get it to stall.
Talk to Jerry at http://www.pnwaero.com/ nice kit and very helpful, he
has
several Moose's with his VG's, his phone is 541-388-9902.
Al
Moose, N526AP
----- Original Message -----
From: <rickjohnson@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, January 04, 2005 11:17 PM
Subject: Vortex Generators

can

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Scott Aldrich · Post by **Scott Aldrich** » Sat Feb 18, 2012 9:58 am

Al, do you happen to remember about how many VG's you have per wing? Tail?

Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Al
Paxhia
Sent: Wednesday, January 05, 2005 12:13 PM
To: rebel-builders@dcsol.com
Subject: Re: Vortex Generators

Hi Wayne,
Yes, it's all one package. Al
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 10:34 AM
Subject: Re: Vortex Generators

Al...does the pretested kit from Jerry, for the Moose, come with the
Stab
VG's or were/are they extra order on top? Thanks, Wayne

----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 1:20 PM
Subject: Re: Vortex Generators

Rick,
I have installed them and they work great.The stall with the VG's is
off
the scale on the airspeed indicator. The airplane fly's slower and has
aileron control with full flaps. It had hardly any aileron control with
full
flaps prior to adding the VG's.
I also have put VG's on the underside of the horizontal stabilizer,
this
gave me more elevator authority, it needed that to get it to stall.
Talk to Jerry at http://www.pnwaero.com/ nice kit and very helpful, he
has
several Moose's with his VG's, his phone is 541-388-9902.
Al
Moose, N526AP
----- Original Message -----
From: <rickjohnson@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, January 04, 2005 11:17 PM
Subject: Vortex Generators

can

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

rickjohnson · Post by **rickjohnson** » Sat Feb 18, 2012 9:58 am

Thanks, Al and you too, Ron.

Rick 277SR

On 1/5/2005 9:20 AM, PAXHIA2@COMCAST.NET wrote to REBEL-BUILDERS:

-> Received: by dcsol.com (Wildcat! SMTP Router v6.0.451.3)
-> for rebel-builders@dcsol.com; Wed, 05 Jan 2005 09:20:06 -0900
-> Received: from rwcrmhc12.comcast.net ([216.148.227.85])
EHLO=rwcrmhc12.comcast.net
-> by dcsol.com (Wildcat! SMTP v6.0.451.3) with SMTP
-> id 470197078; Wed, 05 Jan 2005 09:20:05 -0900
-> Received: from NEWCOMPUTER (c-24-22-142-253.client.comcast.net
[24.22.142.253])
-> by comcast.net (rwcrmhc12) with SMTP
-> id <2005010518200301400rae2qe>; Wed, 5 Jan 2005 18:20:03 +0000
-> Message-ID: <004501c4f353$307314e0$6401a8c0@NEWCOMPUTER>
-> From: "Al Paxhia" <paxhia2@comcast.net>
-> To: <rebel-builders@dcsol.com>
-> References: <1104909444@dcsol.com>
-> Subject: Re: Vortex Generators
-> Date: Wed, 5 Jan 2005 10:20:08 -0800
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
-> X-Orig-Content-Transfer-Encoding: 7bit
-> X-Priority: 3
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook Express 6.00.2900.2180
-> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
-> X-Antivirus-Remover: Message filtered with wsAV v2.0.0 Build 001
->
-> Rick,
-> I have installed them and they work great.The stall with the VG's is off
-> the scale on the airspeed indicator. The airplane fly's slower and has
-> aileron control with full flaps. It had hardly any aileron control with
full
-> flaps prior to adding the VG's.
-> I also have put VG's on the underside of the horizontal stabilizer, this
-> gave me more elevator authority, it needed that to get it to stall.
-> Talk to Jerry at http://www.pnwaero.com/ nice kit and very helpful, he
has
-> several Moose's with his VG's, his phone is 541-388-9902.
-> Al
-> Moose, N526AP
-> ----- Original Message -----
-> From: <rickjohnson@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Tuesday, January 04, 2005 11:17 PM
-> Subject: Vortex Generators
->
->
-> > If anyone has put vortex generators on the mooose or knows about them
can
-> > you
-> > comment on the before and after performance change, if any?
-> >
-> > Thanks,
-> >
-> > Rick 277SR
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Al Paxhia · Post by **Al Paxhia** » Sat Feb 18, 2012 9:58 am

Scott,
I'll count them next time I go up to the hangar.
Al
----- Original Message -----
From: "Scott Aldrich" <sa@mwutah.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 12:37 PM
Subject: RE: Vortex Generators

Al, do you happen to remember about how many VG's you have per wing? Tail?

Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Al
Paxhia
Sent: Wednesday, January 05, 2005 12:13 PM
To: rebel-builders@dcsol.com
Subject: Re: Vortex Generators

Hi Wayne,
Yes, it's all one package. Al
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 10:34 AM
Subject: Re: Vortex Generators

Al...does the pretested kit from Jerry, for the Moose, come with the
Stab
VG's or were/are they extra order on top? Thanks, Wayne

----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 05, 2005 1:20 PM
Subject: Re: Vortex Generators

off
full
this
has can

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Garry Wright · Post by **Garry Wright** » Sun Feb 19, 2012 11:00 am

Walter,

How many sets of these things did you buy for your rebel? I spoke with
Harrison and he suggests 1" spacing on the rudder and 3" on the wing.
What spacings did you use and did you do the rudder at all?

Garry

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------