weigh scale

Roger M Jewell · Post by **Roger M Jewell** » Fri Feb 17, 2012 10:53 pm

I bought a digital kitchen scale in the cooking section of a one-stop
shopping type store. Wasn't too expensive and has nice features to zero
out the weight of the mixing container, sticks, etc.

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jones, Michael · Post by **Jones, Michael** » Fri Feb 17, 2012 10:53 pm

hi all

some where on this site is pictures of how to make a scale for weight
proseal, anyone recall where it is

mike#007

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

mike.davis · Post by **mike.davis** » Fri Feb 17, 2012 10:53 pm

Check out the following site...

http://www.dxmarket.com/micromark/products/82560.html

for $39.95 you get a digital scale that has zero tare, weighs up to 4.4 lbs,
and displays in 0.1 ounce or 1 gram increments.

Mike

On 3/31/03 9:30 PM, MURPHY-REBEL@DCSOL.COM wrote to MIKE DAVIS:
-> In a message dated 3/31/03 12:38:52 PM Central Standard Time,
MJones@hatch.ca
-> writes:
->
-> > some where on this site is pictures of how to make a scale for weight
-> > proseal, anyone recall where it is
-> >
->
-> MIKE
-> Break down and go to you're local head shop and check out the selection. Or
-> find some high school student that's got a GOOD triple beam scale, they're
-> very accurate. Down to the tenth of a gram. l've had a triple beam beam
since
-> the 60's.
-> Or just check on line.
->
->
-> Phil&Lisa Smith
-> #460R
-> N414D
->
->
->
-> *-------------------------------------------------------------------------*
-> To unsubscribe from this list go to:
-> http://www.dcsol.com:81/public/code/html-subscribe.wcx
-> Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
-> To contact the list admin, e-mail mike.davis@dcsol.com
-> *-------------------------------------------------------------------------*
->
->

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

rognal · Post by **rognal** » Fri Feb 17, 2012 10:53 pm

Wray Thompson's Rebel website has a photo of a simple scale made by Charles
Bailey.

Try this URL: http://wrayt.tripod.com/Bal_Beam.jpg

Roger Hoffman #687R
Eugene, OR USA!

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Fri Feb 17, 2012 10:53 pm

Phil, what were you doing with that beam scale in the 60's??? ;o)))))))))

----- Original Message -----
From: <LisaFly99@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Monday, March 31, 2003 11:26 PM
Subject: Re: weigh scale

In a message dated 3/31/03 12:38:52 PM Central Standard Time,

MJones@hatch.ca

writes:

some where on this site is pictures of how to make a scale for weight
proseal, anyone recall where it is

MIKE
Break down and go to you're local head shop and check out the selection.

Or

find some high school student that's got a GOOD triple beam scale, they're
very accurate. Down to the tenth of a gram. l've had a triple beam beam

since

the 60's.
Or just check on line.

Phil&Lisa Smith
#460R
N414D

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

LisaFly99 · Post by **LisaFly99** » Fri Feb 17, 2012 10:53 pm

In a message dated 3/31/03 12:38:52 PM Central Standard Time, MJones@hatch.ca
writes:

some where on this site is pictures of how to make a scale for weight
proseal, anyone recall where it is

MIKE
Break down and go to you're local head shop and check out the selection. Or
find some high school student that's got a GOOD triple beam scale, they're
very accurate. Down to the tenth of a gram. l've had a triple beam beam since
the 60's.
Or just check on line.

Phil&Lisa Smith
#460R
N414D

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wrayt · Post by **wrayt** » Fri Feb 17, 2012 10:53 pm

Hmmm clicking on that link may not work if it shows up in your
mail with all of it underlined ...it seems to strip the
underline off including the underscore between the Bal_Beam.
Guess i better change that to just BalBeam.jpg

ROGNAL wrote:

Wray Thompson's Rebel website has a photo of a simple scale made by Charles
Bailey.

Try this URL: http://wrayt.tripod.com/Bal_Beam.jpg

Roger Hoffman #687R
Eugene, OR USA!

--
Wray Thompson ...Rebel 306 ...home page http://wrayt.tripod.com/
My ICQ number is 29764664

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

rickhm · Post by **rickhm** » Fri Feb 17, 2012 10:53 pm

I went to Wall-mart and spent $20. accurate to within +/- 2 grams.

Rick Muller
SR70
-------Original Message-------
From: LisaFly99@aol.com
Sent: 03/31/03 09:26 PM
To: murphy-rebel@dcsol.com
Subject: Re: weigh scale

In a message dated 3/31/03 12:38:52 PM Central Standard Time,

MJones@hatch.ca
writes:

some where on this site is pictures of how to make a scale for weight
proseal, anyone recall where it is

MIKE
Break down and go to you're local head shop and check out the selection.
Or
find some high school student that's got a GOOD triple beam scale, they're

very accurate. Down to the tenth of a gram. l've had a triple beam beam
since
the 60's.
Or just check on line.

Phil&Lisa
Smith
#460R
N414D

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
<a target=_blank
href="http://www.dcsol.com:81/public/code/htm ... ibe.wcx</a>
Archives located at <a target=_blank
href="http://rebel:builder@www.dcsol.com:81/d ... ult.htm</a>
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jones, Michael · Post by **Jones, Michael** » Fri Feb 17, 2012 10:53 pm

i looked in wall mart found nothing, what section was it in

mike#007

-----Original Message-----
From: rickhm@mindspring.com [mailto:rickhm@mindspring.com]
Sent: Tuesday, April 01, 2003 5:13 PM
To: murphy-rebel@dcsol.com
Subject: Re: Re: weigh scale

I went to Wall-mart and spent $20. accurate to within +/- 2 grams.

Rick Muller
SR70
-------Original Message-------
From: LisaFly99@aol.com
Sent: 03/31/03 09:26 PM
To: murphy-rebel@dcsol.com
Subject: Re: weigh scale

In a message dated 3/31/03 12:38:52 PM Central Standard Time,

MJones@hatch.ca
writes:

some where on this site is pictures of how to make a scale for weight
proseal, anyone recall where it is

MIKE
Break down and go to you're local head shop and check out the selection.
Or
find some high school student that's got a GOOD triple beam scale, they're

very accurate. Down to the tenth of a gram. l've had a triple beam beam
since
the 60's.
Or just check on line.

Phil&Lisa
Smith
#460R
N414D

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
<a target=_blank
href="http://www.dcsol.com:81/public/code/htm ... ://www.dcs
ol.com:81/public/code/html-subscribe.wcx</a>
Archives located at <a target=_blank
href="http://rebel:builder@www.dcsol.com:81/d ... bel:builde
r@www.dcsol.com:81/default.htm</a>
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

klehman · Post by **klehman** » Fri Feb 17, 2012 10:53 pm

For Proseal, if you add 5 gm of hardener to 50 gm of base then you may
wish to make sure the scale has 0.1 gm of resolution. The cheap units
that I looked at only had 1gm resolution which is 20% of 5 gm.
I worked alone but I seem to recall mixing a bunch of small 35 to 50 gm
batches which saved a lot of wastage.
Ken

Jones, Michael wrote:

i looked in wall mart found nothing, what section was it in

mike#007

-----Original Message-----
From: rickhm@mindspring.com [mailto:rickhm@mindspring.com]
Sent: Tuesday, April 01, 2003 5:13 PM
To: murphy-rebel@dcsol.com
Subject: Re: Re: weigh scale

I went to Wall-mart and spent $20. accurate to within +/- 2 grams.

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Rickhm at home · Post by **Rickhm at home** » Fri Feb 17, 2012 10:53 pm

Wow, I don't recall. I do remember it was with the electric can openers,
blenders, etc. It has been 2 years. It was intended to weigh food. They
had some spring type scales and the fancy digital one I bought. They did
have a limited selection.... 3-8 models, so it would be easy to walk by.
Ask the greeter with the O2 bottle :-)

RIck

SR 70

-----Original Message-----
From: Jones, Michael [SMTP:MJones@HATCH.CA]
Sent: Tuesday, April 01, 2003 1:23 PM
To: murphy-rebel@dcsol.com
Subject: RE: Re: weigh scale

i looked in wall mart found nothing, what section was it in

mike#007

-----Original Message-----
From: rickhm@mindspring.com [mailto:rickhm@mindspring.com]
Sent: Tuesday, April 01, 2003 5:13 PM
To: murphy-rebel@dcsol.com
Subject: Re: Re: weigh scale

I went to Wall-mart and spent $20. accurate to within +/- 2 grams.

Rick Muller
SR70
-------Original Message-------
From: LisaFly99@aol.com
Sent: 03/31/03 09:26 PM
To: murphy-rebel@dcsol.com
Subject: Re: weigh scale

In a message dated 3/31/03 12:38:52 PM Central Standard Time,

MJones@hatch.ca
writes:

some where on this site is pictures of how to make a scale for weight
proseal, anyone recall where it is

MIKE
Break down and go to you're local head shop and check out the selection.
Or
find some high school student that's got a GOOD triple beam scale, they're

very accurate. Down to the tenth of a gram. l've had a triple beam beam
since
the 60's.
Or just check on line.

Phil&Lisa
Smith
#460R
N414D

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
<a target=_blank
href="http://www.dcsol.com:81/public/code/htm ... http://www
.dcs
ol.com:81/public/code/html-subscribe.wcx</a>
Archives located at <a target=_blank
href="http://rebel:builder@www.dcsol.com:81/d ... //rebel:bu
ilde
r@www.dcsol.com:81/default.htm</a>
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*** File "WINMAIL.DAT" has been uudecoded and attached to this message.

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------