Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

5/32 rivets

Converted from Wildcat! database. (read only)
Locked
capete

5/32 rivets

Post by capete » Fri Feb 17, 2012 10:49 pm

We just measured up our RV1512 rivets and came up with the following
numbers;

RV1512 rivets = 0.1496 decimal inches
5/32 = 0.1562
#21 drill = 0.1590

We have decided to drill out using a 5/32 drill and not #21 - why drill out
a bigger hole than needed? Isn't 0.010 difference too big a hole?

Peter & Monica
SR003 - Moose builders



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Terry Sack

5/32 rivets

Post by Terry Sack » Fri Feb 17, 2012 10:49 pm

Depending on how many layers you are riveting you may wish you had a #20
drill. I did. Not all lots of rivets have the same dimensions either.
When I couldn't get one of the 5/32 in I would go to another lot I kept just
for the purpose because they were slightly smaller diameter and use one of
those. Managed to get by.

-----Original Message-----
From: capete@golden.net <capete@golden.net>
To: murphy-rebel@dcsol.com <murphy-rebel@dcsol.com>
Date: Friday, February 28, 2003 7:22 PM
Subject: 5/32 rivets

We just measured up our RV1512 rivets and came up with the following
numbers;

RV1512 rivets = 0.1496 decimal inches
5/32 = 0.1562
#21 drill = 0.1590

We have decided to drill out using a 5/32 drill and not #21 - why drill out
a bigger hole than needed? Isn't 0.010 difference too big a hole?

Peter & Monica
SR003 - Moose builders



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*


*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Locked