Eyebolts for wing strut tie downs - Wanted

[Mike Davis]

Received: from h_WPBRADY.americas.dowcornusa.com (dial67.telco.bluegrass.net
[205.198.147.67])
by ns.bluegrass.net (8.8.5/8.8. with ESMTP id EAA08182
for <murphy-rebel@dcsol.com>; Sat, 6 Mar 1999 04:38:58 -0500 (EST)
Message-Id: <199903060938.EAA08182@ns.bluegrass.net>
From: "Bill Brady" <brady@bluegrass.net>
To: "Rebel Builders List" <murphy-rebel@dcsol.com>
Subject: Eyebolts for wing strut tie downs - Wanted
Date: Sat, 6 Mar 1999 04:37:42 -0500
X-MSMail-Priority: Normal
X-Priority: 3
X-Mailer: Microsoft Internet Mail 4.70.1155
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit


I have spent a considerable amount of time searching for eyebolts to
replace a couple of the AN4 bolts at the top of the struts. All that have
been located have had inadequate grip length. Have searched all the
standard homebuilder supply sources and looked all over OHSKOSH last
summer.

The Grainger supply catalog had some hardened 1/4 - 20 threaded eye nuts
but no fine thread 1/4 - 28,

Can anyone provide direction?

[Mike Davis]

Received: from dialup.voyager.co.nz (ts1p09.net.ashburton.voyager.co.nz
[203.21.25.173])
by callisto.net.voyager.co.nz (8.9.0/8.9.0) with ESMTP id LAA04998
for <murphy-rebel@dcsol.com>; Sun, 7 Mar 1999 11:35:21 +1300 (NZDT)
Message-Id: <199903062235.LAA04998@callisto.net.voyager.co.nz>
From: "Alister Yeoman" <yeoman@voyager.co.nz>
To: "Murphy Rebel" <murphy-rebel@dcsol.com>
Subject: Re: Eyebolts for wing strut tie downs - Wanted
Date: Sun, 7 Mar 1999 11:35:42 +1300
X-MSMail-Priority: Normal
X-Priority: 3
X-Mailer: Microsoft Internet Mail 4.70.1155
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Murphy supply the bolts you are looking for.

Alister

----------

From: Bill Brady <brady@bluegrass.net>
To: Rebel Builders List <murphy-rebel@dcsol.com>
Subject: Eyebolts for wing strut tie downs - Wanted
Date: Saturday, March 06, 1999 10:37 PM


I have spent a considerable amount of time searching for eyebolts to
replace a couple of the AN4 bolts at the top of the struts. All that have
been located have had inadequate grip length. Have searched all the
standard homebuilder supply sources and looked all over OHSKOSH last
summer.

The Grainger supply catalog had some hardened 1/4 - 20 threaded eye nuts
but no fine thread 1/4 - 28,

Can anyone provide direction?