Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Stab/elevator reinforcement REBEL

Converted from Wildcat! database. (read only)
Locked
Wayne G. O'Shea

Stab/elevator reinforcement REBEL

Post by Wayne G. O'Shea » Sat Feb 18, 2012 9:23 am

Jesse, it was the end rib on the elevator that you should reinforce. On an
original build I suggest a small piece of angle with a couple rivets into
the end ribs flat face and on the other side of the angle a single RV1613
into the spar tube. This will keep the rib from rotating on the single rivet
that holds it to the spar if built according to the manual. A couple of ,025
doublers in a quarter moon shape picking up 3 rivets in each direction don't
hurt either! The balancer tip's up and down motions twist this end rib until
it forms cracks/buckles or breaks off the attachment tab to the spar. Easier
to tackle now...than after paint and a couple years down the road when you
have forgot where your tools and cleco's went!

Cheers,
Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 12:16 AM
Subject: Re: Stab/elevator reinforcement

It's a Rebel. Got any help for me?
Thanks.

, 13 Aug 2004 15:47:47 -0500
I thought so too at first. After a while, it gets intuitive. If one
were
to only read posts that pertain to his specific type, that person would
miss
out on a lot.

My $0.02 (United States of America currency, where it still states
IN
GOD WE TRUST, that is...)

Bill
It would help if everybody made it clear - Moose/Super Rebel or Rebel
post




_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar - get it now!
http://toolbar.msn.click-url.com/go/onm ... direct/01/




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jesse Jenks

Stab/elevator reinforcement REBEL

Post by Jesse Jenks » Sat Feb 18, 2012 9:23 am

Wayne,
Thanks man.
The 1/4 moons you would put under the skin, or on top?
Jesse
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Stab/elevator reinforcement REBEL
Date: Sat, 14 Aug 2004 17:49:13 -0400

Jesse, it was the end rib on the elevator that you should reinforce. On an
original build I suggest a small piece of angle with a couple rivets into
the end ribs flat face and on the other side of the angle a single RV1613
into the spar tube. This will keep the rib from rotating on the single
rivet
that holds it to the spar if built according to the manual. A couple of
,025
doublers in a quarter moon shape picking up 3 rivets in each direction
don't
hurt either! The balancer tip's up and down motions twist this end rib
until
it forms cracks/buckles or breaks off the attachment tab to the spar.
Easier
to tackle now...than after paint and a couple years down the road when you
have forgot where your tools and cleco's went!

Cheers,
Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 12:16 AM
Subject: Re: Stab/elevator reinforcement

It's a Rebel. Got any help for me?
Thanks.

, 13 Aug 2004 15:47:47 -0500
I thought so too at first. After a while, it gets intuitive. If one
were
to only read posts that pertain to his specific type, that person would
miss
out on a lot.

My $0.02 (United States of America currency, where it still
states
IN
GOD WE TRUST, that is...)

Bill
Rebel
post




_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar - get it now!
http://toolbar.msn.click-url.com/go/onm ... direct/01/




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------


_________________________________________________________________
Check out Election 2004 for up-to-date election news, plus voter tools and
more! http://special.msn.com/msn/election2004.armx




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

Stab/elevator reinforcement REBEL

Post by Wayne G. O'Shea » Sat Feb 18, 2012 9:23 am

Maybe Jesse stutters..cut him some slack! :O)))

----- Original Message -----
From: "Bobby Sather" <sather@charter.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 9:08 PM
Subject: Re: Stab/elevator reinforcement REBEL

Stop repeating your self. I got 10 of the same message.
DO Not ARchive
----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 6:46 PM
Subject: Re: Stab/elevator reinforcement REBEL

Wayne,
Thanks man.
The 1/4 moons you would put under the skin, or on top?
Jesse
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Stab/elevator reinforcement REBEL
Date: Sat, 14 Aug 2004 17:49:13 -0400

Jesse, it was the end rib on the elevator that you should reinforce. On
an
original build I suggest a small piece of angle with a couple rivets
into
the end ribs flat face and on the other side of the angle a single
RV1613
into the spar tube. This will keep the rib from rotating on the single
rivet
that holds it to the spar if built according to the manual. A couple of
,025
doublers in a quarter moon shape picking up 3 rivets in each direction
don't
hurt either! The balancer tip's up and down motions twist this end rib
until
it forms cracks/buckles or breaks off the attachment tab to the spar.
Easier
to tackle now...than after paint and a couple years down the road when
you
have forgot where your tools and cleco's went!

Cheers,
Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 12:16 AM
Subject: Re: Stab/elevator reinforcement

one
were
would
states
IN Rebel

-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------


_________________________________________________________________
Check out Election 2004 for up-to-date election news, plus voter tools
and
more! http://special.msn.com/msn/election2004.armx




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

Stab/elevator reinforcement REBEL

Post by Wayne G. O'Shea » Sat Feb 18, 2012 9:23 am

Look nicer on the inside and the transition will be un-noticable on the skin
if you make sure the doubler edge only extends a short distance past the 3rd
rivet to give the balance of the rivet spacing before the 4th rivet pulls
the skin tight.

Cheers,
Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 8:46 PM
Subject: Re: Stab/elevator reinforcement REBEL

Wayne,
Thanks man.
The 1/4 moons you would put under the skin, or on top?
Jesse
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Stab/elevator reinforcement REBEL
Date: Sat, 14 Aug 2004 17:49:13 -0400

Jesse, it was the end rib on the elevator that you should reinforce. On
an
original build I suggest a small piece of angle with a couple rivets into
the end ribs flat face and on the other side of the angle a single RV1613
into the spar tube. This will keep the rib from rotating on the single
rivet
that holds it to the spar if built according to the manual. A couple of
,025
doublers in a quarter moon shape picking up 3 rivets in each direction
don't
hurt either! The balancer tip's up and down motions twist this end rib
until
it forms cracks/buckles or breaks off the attachment tab to the spar.
Easier
to tackle now...than after paint and a couple years down the road when
you
have forgot where your tools and cleco's went!

Cheers,
Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 12:16 AM
Subject: Re: Stab/elevator reinforcement

It's a Rebel. Got any help for me?
Thanks.

, 13 Aug 2004 15:47:47 -0500
were
would
states
IN
Rebel
_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar - get it now!
http://toolbar.msn.click-url.com/go/onm ... direct/01/




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------


_________________________________________________________________
Check out Election 2004 for up-to-date election news, plus voter tools and
more! http://special.msn.com/msn/election2004.armx




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jesse Jenks

Stab/elevator reinforcement REBEL

Post by Jesse Jenks » Sat Feb 18, 2012 9:23 am

Sorry dudes,
Don't know what happened there.

From: "Bobby Sather" <sather@charter.net>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Stab/elevator reinforcement REBEL
Date: Sat, 14 Aug 2004 19:08:38 -0600

Stop repeating your self. I got 10 of the same message.
DO Not ARchive
----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 6:46 PM
Subject: Re: Stab/elevator reinforcement REBEL

Wayne,
Thanks man.
The 1/4 moons you would put under the skin, or on top?
Jesse
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Stab/elevator reinforcement REBEL
Date: Sat, 14 Aug 2004 17:49:13 -0400

Jesse, it was the end rib on the elevator that you should reinforce. On
an
original build I suggest a small piece of angle with a couple rivets
into
the end ribs flat face and on the other side of the angle a single
RV1613
into the spar tube. This will keep the rib from rotating on the single
rivet
that holds it to the spar if built according to the manual. A couple of
,025
doublers in a quarter moon shape picking up 3 rivets in each direction
don't
hurt either! The balancer tip's up and down motions twist this end rib
until
it forms cracks/buckles or breaks off the attachment tab to the spar.
Easier
to tackle now...than after paint and a couple years down the road when
you
have forgot where your tools and cleco's went!

Cheers,
Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 12:16 AM
Subject: Re: Stab/elevator reinforcement

one
were
would
states
IN Rebel

-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------


_________________________________________________________________
Check out Election 2004 for up-to-date election news, plus voter tools
and
more! http://special.msn.com/msn/election2004.armx




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------


_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/o ... direct/01/




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jerry Purdom

Stab/elevator reinforcement REBEL

Post by Jerry Purdom » Sat Feb 18, 2012 9:23 am

----- Original Message -----
From: "Jerry Purdom" <jerrygoneflying@shaw.ca>
To: "Jerry Purdom" <jerrygoneflying@shaw.ca>
Cc: <mike.davis@dcsol.com>
Sent: Saturday, August 14, 2004 9:51 PM
Subject: Re: Stab/elevator reinforcement REBEL

----- Original Message -----
From: "Jerry Purdom" <jerrygoneflying@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 8:31 PM
Subject: Re: Stab/elevator reinforcement REBEL

you hit the repeat key again HA!HA!
----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, August 14, 2004 5:46 PM
Subject: Re: Stab/elevator reinforcement REBEL

Wayne,
Thanks man.
The 1/4 moons you would put under the skin, or on top?
Jesse
On
an
into
RV1613
single
of
direction
rib
when
you
one
would
or
_________________________________________________________________
Check out Election 2004 for up-to-date election news, plus voter tools
and
more! http://special.msn.com/msn/election2004.armx




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”