temps/weather for 450+ hours w/o carb heat on an M-14--not bragging--just
haven't had it. I'd like to add carb heat...but I too am looking for an
easy to copy template/idea. Supposedly a pressure carb as the M-14 has
isn't susceptible to icing, but I've had a few incidents where I wondered.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of B-L
Pollock
Sent: Monday, January 17, 2011 7:28 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Dynon remote compass location
Ted do you have any pictures of your cabin heat box and carb heat on your
M14
Thanks Bill
----- Original Message -----
From: "Ted Waltman" <ted@vafm.org>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 17, 2011 5:45 PM
Subject: RE: [rebel-builders] Dynon remote compass location
Jason (and others),
I'm putting a Dynon Skyview system in my Moose at the end of
February--working with the folks at Aerotronics in Billings, Montana to do
it with me. I'll take pictures of everything and ask any questions that
you
can think of during the install. I'll post pictures to the list (well
some
anyway).
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Jason
Beall
Sent: Monday, January 17, 2011 3:22 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Dynon remote compass location
Hey Ron,
Where is the AHARS in the Dynon system? Is it an external box in the
tailcone, or is it integral to the display in the panel? I was debating
building a shelf in the back big enough to mount both a magnetometer and
an
AHARS.
-Jason
--- On Mon, 1/17/11, Ron Shannon <rshannon@cruzcom.com> wrote:
From: Ron Shannon <rshannon@cruzcom.com>
Subject: Re: [rebel-builders] Dynon remote compass location
To: rebel-builders@dcsol.com
Date: Monday, January 17, 2011, 12:50 PM
Behind the baggage wall, up near the
ceiling is where I put my magnetometers
too. (Search http://n254mr.com for "magnetometer" for several pics)
As I
recall the mfgr. manual wanted 30" from any ferrous
material. I think that's
a little overkill, but where I put them was about as far
away from anything
ferrous as I could get them, and relatively easy to align
with the
centerline, etc. Research at the time raised concerns about
being near a
swarm of steel rivet mandrels in the area, but that has
proved to be not a
problem.
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------