Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] Flap motor
[rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Thanks Ted I'll look in to that and when you time pics would be great, but don't out of your way just when you have time.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
You might want to look at what I did on my Elite. I believe the pics are
still in the archives.
Flap motor and drive mechanism are from a Cadillac power seat system (which
is made of aluminum, surprisingly).
Al Hepburn
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 1:46 PM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
still in the archives.
Flap motor and drive mechanism are from a Cadillac power seat system (which
is made of aluminum, surprisingly).
Al Hepburn
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 1:46 PM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Ted did you get the 6" stoke ?
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Some have used the RV system, I installed a Cessna system, photos available.
Dick Wampach SR-108 N331RW
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 10:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Dick Wampach SR-108 N331RW
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 10:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Thanks, I'm looking in the archives now
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Alan Hepburn" <g.alan.hepburn@gmail.com>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 14:15:12
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
You might want to look at what I did on my Elite. I believe the pics are
still in the archives.
Flap motor and drive mechanism are from a Cadillac power seat system (which
is made of aluminum, surprisingly).
Al Hepburn
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 1:46 PM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Alan Hepburn" <g.alan.hepburn@gmail.com>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 14:15:12
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
You might want to look at what I did on my Elite. I believe the pics are
still in the archives.
Flap motor and drive mechanism are from a Cadillac power seat system (which
is made of aluminum, surprisingly).
Al Hepburn
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 1:46 PM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Thanks Dick, I would love photos, when you get a chance
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Dick Wampach" <rwampach@att.net>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:19:04
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
Some have used the RV system, I installed a Cessna system, photos available.
Dick Wampach SR-108 N331RW
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 10:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Dick Wampach" <rwampach@att.net>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:19:04
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
Some have used the RV system, I installed a Cessna system, photos available.
Dick Wampach SR-108 N331RW
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 10:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
I could look it up, but I'm quite sure 3" stroke. If you put the motor
where I did, you only need a couple of inches travel for full flap. Pics
posted to area 104 S/M-Flap.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 12:19 PM
To: MAM email list
Subject: Re: [rebel-builders] Flap motor
Ted did you get the 6" stoke ?
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
where I did, you only need a couple of inches travel for full flap. Pics
posted to area 104 S/M-Flap.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 12:19 PM
To: MAM email list
Subject: Re: [rebel-builders] Flap motor
Ted did you get the 6" stoke ?
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
I have a custom electric flap setup on my Rebel, using a linear actuator
from Danaher, which is working well. I'm very pleased with the controller
from Aircraft Extras, which includes some special functionality for reflex
positioning. Several photos are on my site (http://n254mr.com -- search for
"actuator") in addition to some Danaher data sheets in the "Library"
section.
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
from Danaher, which is working well. I'm very pleased with the controller
from Aircraft Extras, which includes some special functionality for reflex
positioning. Several photos are on my site (http://n254mr.com -- search for
"actuator") in addition to some Danaher data sheets in the "Library"
section.
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Go it thanks again
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 12:30:52
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I could look it up, but I'm quite sure 3" stroke. If you put the motor
where I did, you only need a couple of inches travel for full flap. Pics
posted to area 104 S/M-Flap.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 12:19 PM
To: MAM email list
Subject: Re: [rebel-builders] Flap motor
Ted did you get the 6" stoke ?
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 12:30:52
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I could look it up, but I'm quite sure 3" stroke. If you put the motor
where I did, you only need a couple of inches travel for full flap. Pics
posted to area 104 S/M-Flap.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 12:19 PM
To: MAM email list
Subject: Re: [rebel-builders] Flap motor
Ted did you get the 6" stoke ?
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: "Ted Waltman" <ted@vafm.org>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:57:15
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Flap motor
I have the Firgelli Automation
http://www.firgelliauto.com/product_inf ... cts_id=106 set up
on my Moose. Love it. Same actuator as used on RV-10 I believe. I can
send pictures if anyone wants them...I also bought their mounting bracket.
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Kelly
M. Ewing
Sent: Sunday, December 12, 2010 11:46 AM
To: MAM email list
Subject: [rebel-builders] Flap motor
Anyone know where I can get a flap motor ( electric ) system. I want to put
electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Thanks Ron I'll look at it in a few minutes.
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: Ron Shannon <rshannon@cruzcom.com>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:33:48
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Flap motor
I have a custom electric flap setup on my Rebel, using a linear actuator
from Danaher, which is working well. I'm very pleased with the controller
from Aircraft Extras, which includes some special functionality for reflex
positioning. Several photos are on my site (http://n254mr.com -- search for
"actuator") in addition to some Danaher data sheets in the "Library"
section.
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: Ron Shannon <rshannon@cruzcom.com>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 11:33:48
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Flap motor
I have a custom electric flap setup on my Rebel, using a linear actuator
from Danaher, which is working well. I'm very pleased with the controller
from Aircraft Extras, which includes some special functionality for reflex
positioning. Several photos are on my site (http://n254mr.com -- search for
"actuator") in addition to some Danaher data sheets in the "Library"
section.
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Might be worth looking at the aluminum body linear electric actuators
that Princess Auto sells now.
Ken
Kelly M. Ewing wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
that Princess Auto sells now.
Ken
Kelly M. Ewing wrote:
Anyone know where I can get a flap motor ( electric ) system. I want to put electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Flap motor
Thanks Ken, lots of ideas.
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: Ken <klehman@albedo.net>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 15:49:04
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Flap motor
Might be worth looking at the aluminum body linear electric actuators
that Princess Auto sells now.
Ken
Kelly M. Ewing wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Kelly
kelly@tru-form.ca
Enjoy your day !
-----Original Message-----
From: Ken <klehman@albedo.net>
Sender: <mike.davis@dcsol.com>
Date: Sun, 12 Dec 2010 15:49:04
To: <rebel-builders@dcsol.com>
Reply-To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Flap motor
Might be worth looking at the aluminum body linear electric actuators
that Princess Auto sells now.
Ken
Kelly M. Ewing wrote:
Anyone know where I can get a flap motor ( electric ) system. I want to put electric flaps on the moose.
Thanks
Kelly
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------