Check out Wayne's offering... They looked great when I saw pictures a couple
of years ago !
Nig
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Eric
Fogelin
Sent: 05 February 2010 07:08
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Return of Tailwheel Cam
I really want to try skis. We barely get enough snow here at sea level on
Whidbey Island in Washington State, but get a ton of snow in the mountains
where there are frozen lakes and snow covered airstrips.
But, I can't believe how expensive certified skis are. So, I'm thinking that
after several years of floats and tail wheel fun, I'll try to find an
experimental fiberglass design that I can build myself. I'm sure there are
several dubious designs, but maybe there is a good set of plans out there.
Eric
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: Thursday, February 04, 2010 10:51 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Return of Tailwheel Cam
Cool Thanks Eric Now you need to mount some skis and really have some fun.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] Return of Tailwheel Cam (ski's)
[rebel-builders] Return of Tailwheel Cam (ski's)
I built welded tube fixed penetration wheel skis with plastic bottoms. I
shamelessly ripped off the avid flyer design from their webpage after I
tried to buy a set from them but they refused to give me any guidance with
the instalation. Cost was about $200
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
shamelessly ripped off the avid flyer design from their webpage after I
tried to buy a set from them but they refused to give me any guidance with
the instalation. Cost was about $200
Drew-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Eric
Fogelin
Sent: 05 February 2010 07:08
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Return of Tailwheel Cam
I really want to try skis. We barely get enough snow here at sea level on
Whidbey Island in Washington State, but get a ton of snow in the mountains
where there are frozen lakes and snow covered airstrips.
But, I can't believe how expensive certified skis are. So, I'm thinking that
after several years of floats and tail wheel fun, I'll try to find an
experimental fiberglass design that I can build myself. I'm sure there are
several dubious designs, but maybe there is a good set of plans out there.
Eric
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: Thursday, February 04, 2010 10:51 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Return of Tailwheel Cam
Cool Thanks Eric Now you need to mount some skis and really have some fun.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Return of Tailwheel Cam (ski's)
Eric, I have a set of Federal 2000 skis including tail ski for sale that
were used on my Maule.
If that is of interest at all please contact me at hansk3d@gmail.com
cheers
Hans
640E
On Sat, Feb 6, 2010 at 1:42 PM, Drew Dalgleish <drewjan@cabletv.on.ca>wrote:
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
were used on my Maule.
If that is of interest at all please contact me at hansk3d@gmail.com
cheers
Hans
640E
On Sat, Feb 6, 2010 at 1:42 PM, Drew Dalgleish <drewjan@cabletv.on.ca>wrote:
--I built welded tube fixed penetration wheel skis with plastic bottoms. I
shamelessly ripped off the avid flyer design from their webpage after I
tried to buy a set from them but they refused to give me any guidance with
the instalation. Cost was about $200
EricthatFogelin
Sent: 05 February 2010 07:08
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Return of Tailwheel Cam
I really want to try skis. We barely get enough snow here at sea level on
Whidbey Island in Washington State, but get a ton of snow in the mountains
where there are frozen lakes and snow covered airstrips.
But, I can't believe how expensive certified skis are. So, I'm thinkingDrewafter several years of floats and tail wheel fun, I'll try to find an
experimental fiberglass design that I can build myself. I'm sure there are
several dubious designs, but maybe there is a good set of plans out there.
Eric
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf OfDrewDalgleish
Sent: Thursday, February 04, 2010 10:51 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Return of Tailwheel Cam
Cool Thanks Eric Now you need to mount some skis and really have some fun.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------