[rebel-builders] Return of Tailwheel Cam (ski's)

[N.Smith]

Check out Wayne's offering... They looked great when I saw pictures a couple
of years ago !

Nig

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Eric
Fogelin
Sent: 05 February 2010 07:08
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Return of Tailwheel Cam

I really want to try skis. We barely get enough snow here at sea level on
Whidbey Island in Washington State, but get a ton of snow in the mountains
where there are frozen lakes and snow covered airstrips.

But, I can't believe how expensive certified skis are. So, I'm thinking that
after several years of floats and tail wheel fun, I'll try to find an
experimental fiberglass design that I can build myself. I'm sure there are
several dubious designs, but maybe there is a good set of plans out there.

Eric

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: Thursday, February 04, 2010 10:51 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Return of Tailwheel Cam

Cool Thanks Eric Now you need to mount some skis and really have some fun.






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Drew Dalgleish]

I built welded tube fixed penetration wheel skis with plastic bottoms. I
shamelessly ripped off the avid flyer design from their webpage after I
tried to buy a set from them but they refused to give me any guidance with
the instalation. Cost was about $200

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Eric
Fogelin
Sent: 05 February 2010 07:08
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Return of Tailwheel Cam

I really want to try skis. We barely get enough snow here at sea level on
Whidbey Island in Washington State, but get a ton of snow in the mountains
where there are frozen lakes and snow covered airstrips.

But, I can't believe how expensive certified skis are. So, I'm thinking that
after several years of floats and tail wheel fun, I'll try to find an
experimental fiberglass design that I can build myself. I'm sure there are
several dubious designs, but maybe there is a good set of plans out there.

Eric

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: Thursday, February 04, 2010 10:51 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Return of Tailwheel Cam

Cool Thanks Eric Now you need to mount some skis and really have some fun.

Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Hans Kuck]

Eric, I have a set of Federal 2000 skis including tail ski for sale that
were used on my Maule.

If that is of interest at all please contact me at hansk3d@gmail.com

cheers
Hans
640E

On Sat, Feb 6, 2010 at 1:42 PM, Drew Dalgleish <drewjan@cabletv.on.ca>wrote:

I built welded tube fixed penetration wheel skis with plastic bottoms. I
shamelessly ripped off the avid flyer design from their webpage after I
tried to buy a set from them but they refused to give me any guidance with
the instalation. Cost was about $200

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of

Eric

Fogelin
Sent: 05 February 2010 07:08
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Return of Tailwheel Cam

I really want to try skis. We barely get enough snow here at sea level on
Whidbey Island in Washington State, but get a ton of snow in the mountains
where there are frozen lakes and snow covered airstrips.

But, I can't believe how expensive certified skis are. So, I'm thinking

that

after several years of floats and tail wheel fun, I'll try to find an
experimental fiberglass design that I can build myself. I'm sure there are
several dubious designs, but maybe there is a good set of plans out there.

Eric

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of

Drew

Dalgleish
Sent: Thursday, February 04, 2010 10:51 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Return of Tailwheel Cam

Cool Thanks Eric Now you need to mount some skis and really have some fun.

Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
Hans Kuck
P.O.Box 2212
Sechelt B.C.
V0N 3A0
Canada




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------