scott tail wheel mounting

[Jones, Michael]

hi all

perhaps some one could suggest what to use to bolt the scott tail wheel to
the steel spring, was planing on an8-16 bolt, but should i use fibre nut or
castle nut ?

thanx

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

One or the other...otherwise it will just fall off ! )

Seriously..mine's never loosened (going into my 10th year) and it's held on
with a fiber nut AN365-8

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 16, 2004 3:40 PM
Subject: scott tail wheel mounting

hi all

perhaps some one could suggest what to use to bolt the scott tail wheel to
the steel spring, was planing on an8-16 bolt, but should i use fibre nut

or

castle nut ?

thanx

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jones, Michael]

hi wayne

thanks for info, any idea what to torque a 365-8 to ??

mike

-----Original Message-----
From: Wayne G. O'Shea [mailto:oifa@irishfield.on.ca]
Sent: Tuesday, November 16, 2004 4:25 PM
To: rebel-builders@dcsol.com
Subject: Re: scott tail wheel mounting


One or the other...otherwise it will just fall off ! )

Seriously..mine's never loosened (going into my 10th year) and it's held on
with a fiber nut AN365-8

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 16, 2004 3:40 PM
Subject: scott tail wheel mounting

hi all

perhaps some one could suggest what to use to bolt the scott tail wheel to
the steel spring, was planing on an8-16 bolt, but should i use fibre nut

or

castle nut ?

thanx

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Drew Dalgleish]

Hi Mike
My german instructor from drager breathing apparatus had 2 torque values
shnug and gut'n'tight ;)
If that's a 3/8" fine thread bolt torque it to 160-190inch pounds. If it's
3/16" I think you need something stronger but the torque is 20-25"lbs.

thanks for info, any idea what to torque a 365-8 to ??

mike

-----Original Message-----
From: Wayne G. O'Shea [mailto:oifa@irishfield.on.ca]
Sent: Tuesday, November 16, 2004 4:25 PM
To: rebel-builders@dcsol.com
Subject: Re: scott tail wheel mounting


One or the other...otherwise it will just fall off ! )

Seriously..mine's never loosened (going into my 10th year) and it's held on
with a fiber nut AN365-8

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 16, 2004 3:40 PM
Subject: scott tail wheel mounting

hi all

perhaps some one could suggest what to use to bolt the scott tail wheel to
the steel spring, was planing on an8-16 bolt, but should i use fibre nut

or

castle nut ?

thanx

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jones, Michael]

hi drew

its an8 bolt, 1/2 inch for scott tail wheel mounting

-----Original Message-----
From: Drew Dalgleish [mailto:drewjan@cabletv.on.ca]
Sent: Wednesday, November 17, 2004 10:31 AM
To: rebel-builders@dcsol.com
Subject: RE: scott tail wheel mounting


Hi Mike
My german instructor from drager breathing apparatus had 2 torque values
shnug and gut'n'tight ;)
If that's a 3/8" fine thread bolt torque it to 160-190inch pounds. If it's
3/16" I think you need something stronger but the torque is 20-25"lbs.

thanks for info, any idea what to torque a 365-8 to ??

mike

-----Original Message-----
From: Wayne G. O'Shea [mailto:oifa@irishfield.on.ca]
Sent: Tuesday, November 16, 2004 4:25 PM
To: rebel-builders@dcsol.com
Subject: Re: scott tail wheel mounting


One or the other...otherwise it will just fall off ! )

Seriously..mine's never loosened (going into my 10th year) and it's held on
with a fiber nut AN365-8

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 16, 2004 3:40 PM
Subject: scott tail wheel mounting

hi all

perhaps some one could suggest what to use to bolt the scott tail wheel

to

the steel spring, was planing on an8-16 bolt, but should i use fibre nut

or

castle nut ?

thanx

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

As tight as you can get it with a standard issue wrench in your hand!

480 to 690 in lbs (40 to 58 ft-lbs)

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 17, 2004 7:03 AM
Subject: RE: scott tail wheel mounting

hi wayne

thanks for info, any idea what to torque a 365-8 to ??

mike

-----Original Message-----
From: Wayne G. O'Shea [mailto:oifa@irishfield.on.ca]
Sent: Tuesday, November 16, 2004 4:25 PM
To: rebel-builders@dcsol.com
Subject: Re: scott tail wheel mounting


One or the other...otherwise it will just fall off ! )

Seriously..mine's never loosened (going into my 10th year) and it's held

on

with a fiber nut AN365-8

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 16, 2004 3:40 PM
Subject: scott tail wheel mounting

hi all

perhaps some one could suggest what to use to bolt the scott tail wheel

to

the steel spring, was planing on an8-16 bolt, but should i use fibre nut

or

castle nut ?

thanx

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------