Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Ontario mods....

Converted from Wildcat! database. (read only)
Locked
steve whitenect

[rebel-builders] Ontario mods....

Post by steve whitenect » Sun Feb 19, 2012 10:27 am

Hi Jean
Just make another fus 33 out of .032 using the thin one as a template.
Bob P answered the second
The tail support shud be in the archive pictures. It is an angled piece to
support the tail post. I am so out of touch with the part numbers that I
have to get the manuel out to see what is being talked about. Because of
this, I usually don't jump in as much as I shud when someone is asking
questions. If there isn't any pics there, Jean, and if Wayne doesn't have
them at his fingertips, I'll try and take some for u.
.016 on the inside is for looks and nothing else.

Steve W. #637R
From: "Jean Poirier" <jean.poirier@oxyportneuf.com>
Reply-To: <rebel-builders@dcsol.com>
To: "rebel builder" <rebel-builders@dcsol.com>
Subject: [rebel-builders] Ontario mods....
Date: Wed, 1 Mar 2006 09:53:37 -0500

Hello,

I do have a list of Rebel mods taht have been post by Wayne sept,12 2005.
That list originally came from Steve W.

I am building the rear part of the fuselage, I have pick-up the mods that I
think refer to that. I have some questions....

1- FUS-33 made from .032" from bulkhead A to F.... replace the original
one or double it?

2- FUS-30 double it with .032"....

3- .032" tail spar support.... no idea of what it is?

4- .016" covering used inside between bulkhead A to F.... for a nice
finish or for structural purpose

Thanks again (you may think as usual.... ah ah ah)

Jean
Rebel 747R

P.S.: Bob, any developpements for the Sun'Fun meetings?



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

[rebel-builders] Ontario mods....

Post by Wayne G. O'Shea » Sun Feb 19, 2012 10:30 am

Jean #3 is My Service Bulletin that is in the MAM tech section for the Rebel
(Fus-31 to fin tail post reinforce). Should be pictures of the way I
actually do it in the dcsol archives in the Rebel Fuselage section.

Wayne

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 01, 2006 6:48 PM
Subject: RE: [rebel-builders] Ontario mods....

Hi Jean
Just make another fus 33 out of .032 using the thin one as a template.
Bob P answered the second
The tail support shud be in the archive pictures. It is an angled piece
to
support the tail post. I am so out of touch with the part numbers that I
have to get the manuel out to see what is being talked about. Because of
this, I usually don't jump in as much as I shud when someone is asking
questions. If there isn't any pics there, Jean, and if Wayne doesn't have
them at his fingertips, I'll try and take some for u.
.016 on the inside is for looks and nothing else.

Steve W. #637R
From: "Jean Poirier" <jean.poirier@oxyportneuf.com>
Reply-To: <rebel-builders@dcsol.com>
To: "rebel builder" <rebel-builders@dcsol.com>
Subject: [rebel-builders] Ontario mods....
Date: Wed, 1 Mar 2006 09:53:37 -0500

Hello,

I do have a list of Rebel mods taht have been post by Wayne sept,12 2005.
That list originally came from Steve W.

I am building the rear part of the fuselage, I have pick-up the mods that
I
think refer to that. I have some questions....

1- FUS-33 made from .032" from bulkhead A to F.... replace the original
one or double it?

2- FUS-30 double it with .032"....

3- .032" tail spar support.... no idea of what it is?

4- .016" covering used inside between bulkhead A to F.... for a nice
finish or for structural purpose

Thanks again (you may think as usual.... ah ah ah)

Jean
Rebel 747R

P.S.: Bob, any developpements for the Sun'Fun meetings?



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jean Poirier

[rebel-builders] Ontario mods....

Post by Jean Poirier » Sun Feb 19, 2012 10:30 am

Hello Steve,

I will make another fus33 out of .032", but do I use both or just the
.032"one?

Thanks to all for the answers I have received

Jean
Rebel 747R
----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 01, 2006 6:48 PM
Subject: RE: [rebel-builders] Ontario mods....

Hi Jean
Just make another fus 33 out of .032 using the thin one as a template.
Bob P answered the second
The tail support shud be in the archive pictures. It is an angled piece
to
support the tail post. I am so out of touch with the part numbers that I
have to get the manuel out to see what is being talked about. Because of
this, I usually don't jump in as much as I shud when someone is asking
questions. If there isn't any pics there, Jean, and if Wayne doesn't have
them at his fingertips, I'll try and take some for u.
.016 on the inside is for looks and nothing else.

Steve W. #637R
From: "Jean Poirier" <jean.poirier@oxyportneuf.com>
Reply-To: <rebel-builders@dcsol.com>
To: "rebel builder" <rebel-builders@dcsol.com>
Subject: [rebel-builders] Ontario mods....
Date: Wed, 1 Mar 2006 09:53:37 -0500

Hello,

I do have a list of Rebel mods taht have been post by Wayne sept,12 2005.
That list originally came from Steve W.

I am building the rear part of the fuselage, I have pick-up the mods that
I
think refer to that. I have some questions....

1- FUS-33 made from .032" from bulkhead A to F.... replace the original
one or double it?

2- FUS-30 double it with .032"....

3- .032" tail spar support.... no idea of what it is?

4- .016" covering used inside between bulkhead A to F.... for a nice
finish or for structural purpose

Thanks again (you may think as usual.... ah ah ah)

Jean
Rebel 747R

P.S.: Bob, any developpements for the Sun'Fun meetings?



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

steve whitenect

[rebel-builders] Ontario mods....

Post by steve whitenect » Sun Feb 19, 2012 10:30 am

Hi Jean
Just the one

Steve

From: "Jean Poirier" <jean.poirier@oxyportneuf.com>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Ontario mods....
Date: Thu, 2 Mar 2006 09:26:15 -0500

Hello Steve,

I will make another fus33 out of .032", but do I use both or just the
.032"one?

Thanks to all for the answers I have received

Jean
Rebel 747R
----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 01, 2006 6:48 PM
Subject: RE: [rebel-builders] Ontario mods....

Hi Jean
Just make another fus 33 out of .032 using the thin one as a template.
Bob P answered the second
The tail support shud be in the archive pictures. It is an angled piece
to
support the tail post. I am so out of touch with the part numbers that I
have to get the manuel out to see what is being talked about. Because of
this, I usually don't jump in as much as I shud when someone is asking
questions. If there isn't any pics there, Jean, and if Wayne doesn't
have
them at his fingertips, I'll try and take some for u.
.016 on the inside is for looks and nothing else.

Steve W. #637R
From: "Jean Poirier" <jean.poirier@oxyportneuf.com>
Reply-To: <rebel-builders@dcsol.com>
To: "rebel builder" <rebel-builders@dcsol.com>
Subject: [rebel-builders] Ontario mods....
Date: Wed, 1 Mar 2006 09:53:37 -0500

Hello,

I do have a list of Rebel mods taht have been post by Wayne sept,12
2005.
That list originally came from Steve W.

I am building the rear part of the fuselage, I have pick-up the mods
that
I
think refer to that. I have some questions....

1- FUS-33 made from .032" from bulkhead A to F.... replace the
original
one or double it?

2- FUS-30 double it with .032"....

3- .032" tail spar support.... no idea of what it is?

4- .016" covering used inside between bulkhead A to F.... for a nice
finish or for structural purpose

Thanks again (you may think as usual.... ah ah ah)

Jean
Rebel 747R

P.S.: Bob, any developpements for the Sun'Fun meetings?



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked