Windshield Retainer strip

[Wayne G. O'Shea]

Someone asked about the old (smart/clean/easy) way to do the windshield
retainer the other day....as I said it's just .020 aluminum.. but .025 or
.032 can be substituted.

The strip has an overall width of 1.5" and each edge has a brake in it of
about 5* (basically closing the brake will give most of the angle
required..just pull up the leaf ever so lightly). The "brakes" are 0.25" in
from one edge and 0.5" from the other.

Cheers,
Wayne





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[steve whitenect]

Thanks Wayne
Been flying steady the last two days and haven't touched the computor so I
didn't get a chance to reply to you other message.

Steve W.

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Subject: Windshield Retainer strip
Date: Fri, 10 Dec 2004 19:08:30 -0500

Someone asked about the old (smart/clean/easy) way to do the windshield
retainer the other day....as I said it's just .020 aluminum.. but .025 or
.032 can be substituted.

The strip has an overall width of 1.5" and each edge has a brake in it of
about 5* (basically closing the brake will give most of the angle
required..just pull up the leaf ever so lightly). The "brakes" are 0.25" in
from one edge and 0.5" from the other.

Cheers,
Wayne





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------