Primer / corrosion preventions

[Wudoktor]

One could use strontium chromate, a milspec corrosion inhibitor, where
possible, or corrision=X or ACF-50 which actually wicks everywhere, healthy for
electrics, and kills corrosion.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Just make sure that you don't use any of it before exterior painting is
done!

----- Original Message -----
From: <Wudoktor@aol.com>
To: <rebel-builders-d@dcsol.com>
Sent: Friday, December 03, 2004 6:27 PM
Subject: Re: Primer / corrosion preventions

One could use strontium chromate, a milspec corrosion inhibitor, where
possible, or corrision=X or ACF-50 which actually wicks everywhere,

healthy for

electrics, and kills corrosion.





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

In addition...Keep in mind that while CorrosionX and ACF 50 are great
products... as well as Boeshield T-9........users have to be aware that
these products are not a one shot deal. Depending on ambient conditions and
storage it will have to be applied again in as little as six months. Kept in
a hangar with relatively low humidity it can last as long as five years...
so you will find yourself needing access again to all structures being
sprayed sooner or later.

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 03, 2004 7:02 PM
Subject: Re: Primer / corrosion preventions

Just make sure that you don't use any of it before exterior painting is
done!

----- Original Message -----
From: <Wudoktor@aol.com>
To: <rebel-builders-d@dcsol.com>
Sent: Friday, December 03, 2004 6:27 PM
Subject: Re: Primer / corrosion preventions

One could use strontium chromate, a milspec corrosion inhibitor, where
possible, or corrision=X or ACF-50 which actually wicks everywhere,

healthy for

electrics, and kills corrosion.





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Here's the link to Boeshield http://www.boeshieldcanada.com/index.php and
a list of where you can buy it from Lee Valley Tools in Canada.

You may purchase Boeshield T-9