FUS 27

[Mike Davis]

Received: from default (AS52-18-133.cas-kit.golden.net [209.183.131.133]) by
golden.net

(8.8.5/8.6.12) with SMTP id KAA22638 for <murphy-rebel@dcsol.com>; Sun, 6
Jun 1999 10:08:56

-0400 (EDT)
Message-ID: <000c01beb026$9ba54ce0$8583b7d1@default>
From: "Monica/Peter" <piquette@golden.net>
To: "murphy list" <murphy-rebel@dcsol.com>
Subject: FUS 27
Date: Sun, 6 Jun 1999 10:12:23 -0400
MIME-Version: 1.0
Content-Type: text/plain;
charset="utf-7"
Content-Transfer-Encoding: quoted-printable
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3110.1
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3

To all builders,

We are building a SR2500 and have arrived at the Fuselage Root Rib (FUS =
27). The manual says to shrink or crimp the top flange of the FUS 27 so =
it will lay flat. The flange should be 90 degrees to the side. =20

Does anyone have any suggestions as to how this should be done? =20

Any ideas would be helpful...

Peter Kopasovic and Monica Piquette
SR 0003




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[David L. Tuck]

Can some one tell me ? as I seem to be not understanding this ! They tell me
in the man, that the fus 27 top flange should be bent to a 45 of the web ??
do they mean the table ? I don't seem to be getting this section.
Thank you Dave T / rebel 009





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------