Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Question of Rebel Datum location/ Cof G ran

Converted from Wildcat! database. (read only)
Locked
GORDON REICH

[rebel-builders] Question of Rebel Datum location/ Cof G range

Post by GORDON REICH » Sun Feb 19, 2012 8:35 pm

All weighing and measuring must be done with the aircraft level. If its level, the tire size makes no difference.
----- Original Message -----
From: Ron Shannon<mailto:rshannon@cruzcom.com>
To: rebel-builders@dcsol.com<mailto:rebel-builders@dcsol.com>
Sent: Saturday, February 12, 2011 7:27 PM
Subject: Re: [rebel-builders] Question of Rebel Datum location/ Cof G range


On 254R, with spring gear and 8.00x6.00 Carlisle turf tires, the center of
the axle was 0.5" forward of a plumb bob dropped from the leading edge.

Ron
N254MR


On Sat, Feb 12, 2011 at 4:03 PM, Wayne G. O'Shea <oifa@irishfield.on.ca>wrote<mailto:oifa@irishfield.on.ca%3Ewrote>:
Gary.. the axle center line is not ahead of the leading edge! It is indeed
AFT of the wing leading edge.


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login<https://ma ... .com/login>
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com<mailto:rebel-builders-unsubscribe@dcsol.com>
List administrator: mike.davis@dcsol.com<mailto:mike.davis@dcsol.com>
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Locked