From: "Rebel" <rebel@dcsol.com>
To: <mike.davis@dcsol.com>
Sent: Monday, May 10, 2010 6:11 PM
Subject: SR/Moose Elevator Horn Bell Cranks
I am looking for two FUS-304 elevator horn bell cranks, which attach to the
bearing MI-25.
the Chapter 9.2 45) shows the part but there are no dimensions between the
holes. I have
neither parts but can purchase the bearings. If someone has extra parts
that would be
great or if I could get a drawing or dimensionsI could make the part. I
would also need to
know the thickness of aluminum.
any help appreciated.
Yukon 013Y
Rhuzzey@telus.net
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------