Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Re: gear leg inserts

Converted from Wildcat! database. (read only)
Locked
Jay Yau

[rebel-builders] Re: gear leg inserts

Post by Jay Yau » Sun Feb 19, 2012 5:58 pm

If this refer to Spring gear ?



Jay
Subject: [rebel-builders] Re: gear leg inserts
From: jcole@rangroup.com
Date: Tue, 12 Jan 2010 12:30:25 -0500
To: rebel-builders@dcsol.com

Just wondering if anyone in BC knows Gord Mohr and if he is still
making the gear leg inserts??
Contact info would be great. I have an email address from Bob - just
not sure if it's current.

Thanks
Jim R333

Jim Cole
President
Ran Group Inc
jcole@rangroup.com
1-705-458-9669



On 2010-01-11, at 8:29 AM, Drew Dalgleish wrote:
Nice videos Wayne. Should you have said any landing you can swim
away from?
;) Had a nice flight yesterday sunshine & light winds, it seemed
every sled
was out on the trails as well.

At 11:50 PM 10/01/2010 -0500, you wrote:
Here's some stuff to get you drilling and riveting... from
September 2009...
finally got my buddy's SD card. All of these videos are me
(220lbs), my
buddy (235lbs), 20 to 30 gallons of fuel and the 12' Sportspal on
the side.

Counting in the head.. a thousand and one.. a thousand and two..
the take
offs all seem to be 12 to 16 seconds that we always state around
here.....
but the timer tells no lies in the videos.. generally 25 seconds in
this
configuration.. no wind.. glassy water.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/196390708/direct/01/



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jim Cole

[rebel-builders] Re: gear leg inserts

Post by Jim Cole » Sun Feb 19, 2012 5:58 pm

No it's the traditional gear.

Jim

Jim Cole
President
Ran Group Inc
jcole@rangroup.com
1-705-458-9669



On 2010-01-12, at 12:54 PM, Jay Yau wrote:
If this refer to Spring gear ?



Jay
Subject: [rebel-builders] Re: gear leg inserts
From: jcole@rangroup.com
Date: Tue, 12 Jan 2010 12:30:25 -0500
To: rebel-builders@dcsol.com

Just wondering if anyone in BC knows Gord Mohr and if he is still
making the gear leg inserts??
Contact info would be great. I have an email address from Bob - just
not sure if it's current.

Thanks
Jim R333

Jim Cole
President
Ran Group Inc
jcole@rangroup.com
1-705-458-9669



On 2010-01-11, at 8:29 AM, Drew Dalgleish wrote:
Nice videos Wayne. Should you have said any landing you can swim
away from?
;) Had a nice flight yesterday sunshine & light winds, it seemed
every sled
was out on the trails as well.

At 11:50 PM 10/01/2010 -0500, you wrote: Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/196390708/direct/01/



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Joe Ronco

[rebel-builders] Re: gear leg inserts

Post by Joe Ronco » Sun Feb 19, 2012 5:58 pm

JIM: Go to the Rebel Files in 221-Aftermarket Products and click on the
Description for "Pivot mod for bungee gear". Gordon's e-mail and telephone
number are there as well as a picture of the mod parts. This info was
uploaded in 2005 and Jean Poirier said it was current in January 2007.

Hope this helps.

Joe Ronco

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jim
Cole
Sent: Tuesday, January 12, 2010 10:30 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Re: gear leg inserts

Just wondering if anyone in BC knows Gord Mohr and if he is still
making the gear leg inserts??
Contact info would be great. I have an email address from Bob - just
not sure if it's current.

Thanks
Jim R333

Jim Cole
President
Ran Group Inc
jcole@rangroup.com
1-705-458-9669



On 2010-01-11, at 8:29 AM, Drew Dalgleish wrote:
Nice videos Wayne. Should you have said any landing you can swim
away from?
;) Had a nice flight yesterday sunshine & light winds, it seemed
every sled
was out on the trails as well.

At 11:50 PM 10/01/2010 -0500, you wrote:
Here's some stuff to get you drilling and riveting... from
September 2009...
finally got my buddy's SD card. All of these videos are me
(220lbs), my
buddy (235lbs), 20 to 30 gallons of fuel and the 12' Sportspal on
the side.

Counting in the head.. a thousand and one.. a thousand and two..
the take
offs all seem to be 12 to 16 seconds that we always state around
here.....
but the timer tells no lies in the videos.. generally 25 seconds in
this
configuration.. no wind.. glassy water.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Drew Dalgleish

[rebel-builders] Re: gear leg inserts

Post by Drew Dalgleish » Sun Feb 19, 2012 5:58 pm

Hi Jim When my gear started to wear I machined delrin blocks to fit inside
the gear legs then drilled the holes oversize and pressed in oillite bushings.

At 12:30 PM 12/01/2010 -0500, you wrote:
Just wondering if anyone in BC knows Gord Mohr and if he is still
making the gear leg inserts??
Contact info would be great. I have an email address from Bob - just
not sure if it's current.

Thanks
Jim R333

Jim Cole
President
Ran Group Inc
jcole@rangroup.com
1-705-458-9669



On 2010-01-11, at 8:29 AM, Drew Dalgleish wrote:
Nice videos Wayne. Should you have said any landing you can swim
away from?
;) Had a nice flight yesterday sunshine & light winds, it seemed
every sled
was out on the trails as well.

At 11:50 PM 10/01/2010 -0500, you wrote:
Here's some stuff to get you drilling and riveting... from
September 2009...
finally got my buddy's SD card. All of these videos are me
(220lbs), my
buddy (235lbs), 20 to 30 gallons of fuel and the 12' Sportspal on
the side.

Counting in the head.. a thousand and one.. a thousand and two..
the take
offs all seem to be 12 to 16 seconds that we always state around
here.....
but the timer tells no lies in the videos.. generally 25 seconds in
this
configuration.. no wind.. glassy water.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jim Cole

[rebel-builders] Re: gear leg inserts

Post by Jim Cole » Sun Feb 19, 2012 5:58 pm

Thanks Joe - I left a message.

Cheers
Jim

Jim Cole
President
Ran Group Inc
jcole@rangroup.com
1-705-458-9669



On 2010-01-12, at 1:51 PM, Joe Ronco wrote:
JIM: Go to the Rebel Files in 221-Aftermarket Products and click on the
Description for "Pivot mod for bungee gear". Gordon's e-mail and telephone
number are there as well as a picture of the mod parts. This info was
uploaded in 2005 and Jean Poirier said it was current in January 2007.

Hope this helps.

Joe Ronco

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jim
Cole
Sent: Tuesday, January 12, 2010 10:30 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Re: gear leg inserts

Just wondering if anyone in BC knows Gord Mohr and if he is still
making the gear leg inserts??
Contact info would be great. I have an email address from Bob - just
not sure if it's current.

Thanks
Jim R333

Jim Cole
President
Ran Group Inc
jcole@rangroup.com
1-705-458-9669



On 2010-01-11, at 8:29 AM, Drew Dalgleish wrote:
Nice videos Wayne. Should you have said any landing you can swim
away from?
;) Had a nice flight yesterday sunshine & light winds, it seemed
every sled
was out on the trails as well.

At 11:50 PM 10/01/2010 -0500, you wrote:
Here's some stuff to get you drilling and riveting... from
September 2009...
finally got my buddy's SD card. All of these videos are me
(220lbs), my
buddy (235lbs), 20 to 30 gallons of fuel and the 12' Sportspal on
the side.

Counting in the head.. a thousand and one.. a thousand and two..
the take
offs all seem to be 12 to 16 seconds that we always state around
here.....
but the timer tells no lies in the videos.. generally 25 seconds in
this
configuration.. no wind.. glassy water.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”