[rebel-builders] Rotec Radial Vs. Lyc -- Dilemma

[craig]

Yes, all good points, Jeff. I have thought of all of these. The rotec
weighs 270 and is rated at 150 hp...similar to the lyc; supposedly would
have more torque based on larger diam prop, eng design, and the redrive.
Parts would be an issue for sure. More research is needed. :)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Keith Leitch]

Craig,
I had thought of the Rotec also. Beautiful engine!!! eck of a good price on them earlier this year. Seems that MAM had cooling issues or something with the one they built. But then again that was the 110 HP model. I am thinking that that Rebel went to Austrailia maybe.
Keith

--- On Wed, 11/18/09, craig <snowyrvr@mtaonline.net> wrote:


From: craig <snowyrvr@mtaonline.net>
Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma
To: rebel-builders@dcsol.com
Date: Wednesday, November 18, 2009, 6:14 PM


Yes, all good points, Jeff.

[Walter Klatt]

I like the looks of the radial, but still prefer the Lyc for many other
reasons. But used to wonder if it was possible to make a radial type cowl,
similar to the Renegade, that would fit on the Rebel with a Lyc. Could the
Rotec Rebel cowl be adapted for a Lyc? Probably would have great cooling
with that bigger inlet...

Walter

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of craig
Sent: November 18, 2009 4:14 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma

Yes, all good points, Jeff. I have thought of all of these. The rotec
weighs 270 and is rated at 150 hp...similar to the lyc; supposedly would
have more torque based on larger diam prop, eng design, and the redrive.
Parts would be an issue for sure. More research is needed. :)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bill Maxwell]

I haven't heard of that one coming this far south Keith but there is
another, based in Darwin at least until recently, that is flying with a
Rotec. The builder/owner, who is also a native of Tasmania, visited me
here earlier in the year.

Of course, the Rotec came from Australia in the first place.

Bill 753R, Powranna, Tasmania.

Keith Leitch wrote:

Craig,
I had thought of the Rotec also. Beautiful engine!!! eck of a good price on them earlier this year. Seems that MAM had cooling issues or something with the one they built. But then again that was the 110 HP model. I am thinking that that Rebel went to Austrailia maybe.
Keith

--- On Wed, 11/18/09, craig <snowyrvr@mtaonline.net> wrote:


From: craig <snowyrvr@mtaonline.net>
Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma
To: rebel-builders@dcsol.com
Date: Wednesday, November 18, 2009, 6:14 PM


Yes, all good points, Jeff. I have thought of all of these. The rotec
weighs 270 and is rated at 150 hp...similar to the lyc; supposedly would
have more torque based on larger diam prop, eng design, and the redrive.
Parts would be an issue for sure. More research is needed. :)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[gleeso1]

For info, FAZC is on the RA Aus register and is up at Mullumbimby
Northern NSW.

John, Rebel 804 Down Under (south of Mullumbimby, but north of Powranna)
:-)






Bill Maxwell wrote:

I haven't heard of that one coming this far south Keith but there is
another, based in Darwin at least until recently, that is flying with a
Rotec. The builder/owner, who is also a native of Tasmania, visited me
here earlier in the year.

Of course, the Rotec came from Australia in the first place.

Bill 753R, Powranna, Tasmania.

Keith Leitch wrote:

Craig,
I had thought of the Rotec also. Beautiful engine!!! eck of a good price on them earlier this year. Seems that MAM had cooling issues or something with the one they built. But then again that was the 110 HP model. I am thinking that that Rebel went to Austrailia maybe.
Keith

--- On Wed, 11/18/09, craig <snowyrvr@mtaonline.net> wrote:


From: craig <snowyrvr@mtaonline.net>
Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma
To: rebel-builders@dcsol.com
Date: Wednesday, November 18, 2009, 6:14 PM


Yes, all good points, Jeff. I have thought of all of these. The rotec
weighs 270 and is rated at 150 hp...similar to the lyc; supposedly would
have more torque based on larger diam prop, eng design, and the redrive.
Parts would be an issue for sure. More research is needed. :)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bill Maxwell]

Thanks John. I take it that was C-FACZ originally?

Bill

gleeso1 wrote:

For info, FAZC is on the RA Aus register and is up at Mullumbimby
Northern NSW.

John, Rebel 804 Down Under (south of Mullumbimby, but north of Powranna)
:-)






Bill Maxwell wrote:

I haven't heard of that one coming this far south Keith but there is
another, based in Darwin at least until recently, that is flying with a
Rotec. The builder/owner, who is also a native of Tasmania, visited me
here earlier in the year.

Of course, the Rotec came from Australia in the first place.

Bill 753R, Powranna, Tasmania.

Keith Leitch wrote:

Craig,
I had thought of the Rotec also. Beautiful engine!!! eck of a good price on them earlier this year. Seems that MAM had cooling issues or something with the one they built. But then again that was the 110 HP model. I am thinking that that Rebel went to Austrailia maybe.
Keith

--- On Wed, 11/18/09, craig <snowyrvr@mtaonline.net> wrote:


From: craig <snowyrvr@mtaonline.net>
Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma
To: rebel-builders@dcsol.com
Date: Wednesday, November 18, 2009, 6:14 PM


Yes, all good points, Jeff. I have thought of all of these. The rotec
weighs 270 and is rated at 150 hp...similar to the lyc; supposedly would
have more torque based on larger diam prop, eng design, and the redrive.
Parts would be an issue for sure. More research is needed. :)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jeff Micheal]

The one off "Mini Moose" call sign *C-FAZC* did depart CYCW and headed Down
Under.

Jeff


On Wed, Nov 18, 2009 at 7:38 PM, Bill Maxwell <wrmaxwell@bigpond.com> wrote:

Thanks John. I take it that was C-FACZ originally?

Bill

gleeso1 wrote:

For info, FAZC is on the RA Aus register and is up at Mullumbimby
Northern NSW.

John, Rebel 804 Down Under (south of Mullumbimby, but north of Powranna)
:-)

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[avionn]

Thank You
Eric DeHorta
On 11/18/2009 6:15 PM, wrmaxwell@bigpond.com wrote to rebel-builders:

-> I haven't heard of that one coming this far south Keith but there is
-> another, based in Darwin at least until recently, that is flying with a
-> Rotec. The builder/owner, who is also a native of Tasmania, visited me
-> here earlier in the year.
->
-> Of course, the Rotec came from Australia in the first place.
->
-> Bill 753R, Powranna, Tasmania.
->
-> Keith Leitch wrote:
-> > Craig,
-> > I had thought of the Rotec also. Beautiful engine!!! eck of a good price
on them earlier this year. Seems that MAM had cooling issues or something
with the one they built. But then again that was the 110 HP model. I am
thinking that that Rebel went to Austrailia maybe.
-> > Keith
-> >
-> > --- On Wed, 11/18/09, craig <snowyrvr@mtaonline.net> wrote:
-> >
-> >
-> > From: craig <snowyrvr@mtaonline.net>
-> > Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma
-> > To: rebel-builders@dcsol.com
-> > Date: Wednesday, November 18, 2009, 6:14 PM
-> >
-> >
-> > Yes, all good points, Jeff. I have thought of all of these. The rotec
-> > weighs 270 and is rated at 150 hp...similar to the lyc; supposedly would
-> > have more torque based on larger diam prop, eng design, and the
redrive.
-> > Parts would be an issue for sure. More research is needed. :)
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://mail.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
-> >
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://mail.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
-> >




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[avionn]

Thank You
Eric DeHorta
On 11/18/2009 6:22 PM, gleeso1@iprimus.com.au wrote to rebel-builders:

-> For info, FAZC is on the RA Aus register and is up at Mullumbimby
-> Northern NSW.
->
-> John, Rebel 804 Down Under (south of Mullumbimby, but north of
Powranna)
-> :-)
->
->
->
->
->
->
-> Bill Maxwell wrote:
-> > I haven't heard of that one coming this far south Keith but there is
-> > another, based in Darwin at least until recently, that is flying with a
-> > Rotec. The builder/owner, who is also a native of Tasmania, visited me
-> > here earlier in the year.
-> >
-> > Of course, the Rotec came from Australia in the first place.
-> >
-> > Bill 753R, Powranna, Tasmania.
-> >
-> > Keith Leitch wrote:
-> >
-> >> Craig,
-> >> I had thought of the Rotec also. Beautiful engine!!! eck of a good price
on them earlier this year. Seems that MAM had cooling issues or something
with the one they built. But then again that was the 110 HP model. I am
thinking that that Rebel went to Austrailia maybe.
-> >> Keith
-> >>
-> >> --- On Wed, 11/18/09, craig <snowyrvr@mtaonline.net> wrote:
-> >>
-> >>
-> >> From: craig <snowyrvr@mtaonline.net>
-> >> Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma
-> >> To: rebel-builders@dcsol.com
-> >> Date: Wednesday, November 18, 2009, 6:14 PM
-> >>
-> >>
-> >> Yes, all good points, Jeff. I have thought of all of these. The rotec
-> >> weighs 270 and is rated at 150 hp...similar to the lyc; supposedly
would
-> >> have more torque based on larger diam prop, eng design, and the
redrive.
-> >> Parts would be an issue for sure. More research is needed. :)
-> >>
-> >>
-> >>
-> >>
-> >> -----------------------------------------------------------------
-> >> List archives located at: https://mail.dcsol.com/login
-> >> username "rebel" password "builder"
-> >> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> >> List administrator: mike.davis@dcsol.com
-> >> -----------------------------------------------------------------
-> >>
-> >>
-> >>
-> >>
-> >>
-> >>
-> >>
-> >>
-> >>
-> >>
-> >> -----------------------------------------------------------------
-> >> List archives located at: https://mail.dcsol.com/login
-> >> username "rebel" password "builder"
-> >> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> >> List administrator: mike.davis@dcsol.com
-> >> -----------------------------------------------------------------
-> >>
-> >>
-> >>
-> >>
-> >>
-> >>
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://mail.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
-> >
->
->




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[avionn]

Thank You
Eric DeHorta
On 11/18/2009 6:38 PM, wrmaxwell@bigpond.com wrote to rebel-builders:

-> Thanks John. I take it that was C-FACZ originally?
->
-> Bill
->
-> gleeso1 wrote:
-> > For info, FAZC is on the RA Aus register and is up at Mullumbimby
-> > Northern NSW.
-> >
-> > John, Rebel 804 Down Under (south of Mullumbimby, but north of
Powranna)
-> > :-)
-> >
-> >
-> >
-> >
-> >
-> >
-> > Bill Maxwell wrote:
-> >
-> >> I haven't heard of that one coming this far south Keith but there is
-> >> another, based in Darwin at least until recently, that is flying with a
-> >> Rotec. The builder/owner, who is also a native of Tasmania, visited me
-> >> here earlier in the year.
-> >>
-> >> Of course, the Rotec came from Australia in the first place.
-> >>
-> >> Bill 753R, Powranna, Tasmania.
-> >>
-> >> Keith Leitch wrote:
-> >>
-> >>
-> >>> Craig,
-> >>> I had thought of the Rotec also. Beautiful engine!!! eck of a good
price on them earlier this year. Seems that MAM had cooling issues or
something with the one they built. But then again that was the 110 HP
model. I am thinking that that Rebel went to Austrailia maybe.
-> >>> Keith
-> >>>
-> >>> --- On Wed, 11/18/09, craig <snowyrvr@mtaonline.net> wrote:
-> >>>
-> >>>
-> >>> From: craig <snowyrvr@mtaonline.net>
-> >>> Subject: Re: [rebel-builders] Rotec Radial Vs. Lyc -- Dilemma
-> >>> To: rebel-builders@dcsol.com
-> >>> Date: Wednesday, November 18, 2009, 6:14 PM
-> >>>
-> >>>
-> >>> Yes, all good points, Jeff. I have thought of all of these. The rotec
-> >>> weighs 270 and is rated at 150 hp...similar to the lyc; supposedly
would
-> >>> have more torque based on larger diam prop, eng design, and the
redrive.
-> >>> Parts would be an issue for sure. More research is needed. :)
-> >>>
-> >>>
-> >>>
-> >>>
-> >>> -----------------------------------------------------------------
-> >>> List archives located at: https://mail.dcsol.com/login
-> >>> username "rebel" password "builder"
-> >>> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> >>> List administrator: mike.davis@dcsol.com
-> >>> -----------------------------------------------------------------
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>> -----------------------------------------------------------------
-> >>> List archives located at: https://mail.dcsol.com/login
-> >>> username "rebel" password "builder"
-> >>> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> >>> List administrator: mike.davis@dcsol.com
-> >>> -----------------------------------------------------------------
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>>
-> >>
-> >> -----------------------------------------------------------------
-> >> List archives located at: https://mail.dcsol.com/login
-> >> username "rebel" password "builder"
-> >> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> >> List administrator: mike.davis@dcsol.com
-> >> -----------------------------------------------------------------
-> >>
-> >>
-> >>
-> >>
-> >>
-> >>
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://mail.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
-> >




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------