Need Prop Spacer

[craig]

It looks like I'm going to need a 2" spacer for my prop set-up. I have a 2.5" and somehow I ended up with a 1.5" gap between my front cowl and spinner. Not sure what happened but I did follow the MAM cowl instructions. Maybe they are not made for a 2.5" spacer. Anyhow, I can make up a 1/2" at the spacer and another 3/4" where the cowl attaches at the firewall. That will leave around a 1/4" gap. Luckily I have a good sized lip at the back to trim.

Anyhow, the prop is a Sens 74-56 w/ 1/2 bolts. I'd like to swap with someone rather than have to buy one. I'm guessing that they are not cheap. Anyone have one they don't want or know of one? Thanks, Craig



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------