Hello All
I have looked through the very extensive archives about tail wheels and I
still have a question. Consider the following. I plan to certify my Rebel at
1320 Lbs. and have an old Scott 2000 (6" hard rubber tire) tail wheel off my
Luscombe which I replaced with a new trouble free Scott 2000 15 +years ago,
Today the Scott wheels are hard to fine and are so expensive, I intend to
make the necessary parts and put it back in to service. If I install a steel
spring and the "rebuilt" Scott wheel, it will weigh 8.2 Lbs. or about 2.2
Lbs more then the Rebel wheel & spring that came with my kit. It's not a
fork type tail wheel but is there any reason why this wheel wouldn't work on
the Rebel? Is there anybody who has had success/failure with this wheel on
their Rebel I sure would like to hear from you.
Charlie E. 802R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions