I just uploaded a spreadsheet to the "Software" section that may be helpful
in particular to those of you planning to use an engine that requires a gear
reduction. I have recently discovered that my decision to use a 2.11 to 1
ratio was a bad idea. Based on the max engine RPM I desire I should have
used a lower ratio. I am now faced with trying to modify my gear box or
look at other options. Even for those not using a gear reduction you might
find it useful if you are wondering what diameter prop to use. If you know
your max engine RPM enter that and just enter one (1) for the reduction
ratio and play with the prop diameter to find your optimum prop diameter.
Don't forget to take into account ground clearance. I think the FAA
mandated minimum clearance in a level attitude on the ground is 7 inches.
Mike
044SR
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions