Finishing the aileron torque tube

[Mike Kimball]

I've got the fuselage on its gear and the wings ready to mount and I notice
that I still haven't finished off the aileron torque tubes at the wing root
end. I scoured the manual and, no surprise, I cannot find anything that
tells me what I'm supposed to attach to that end. I found some El-31
fittings to go inside the 2-inch tube, and the little rings to go outside
the tube for the rivets, and some straight horns that are 4 inches from
pivot point to attach point. I'm guessing these are the parts to use. But
I guess I'll be on my own for figuring out what direction the horn should be
pointing when I rivet it on. Any tips? Are these the right parts?

Mike
044SR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------