I like the single flute deburring tool from ACS. It It has a threaded shank that can be screwed into a hex adapter for use in a screwdriver. A 6" fine flat file does well on flat surfaces that the above will not reach. 3M ScotchBrite wheels work well on sheet edges and faster than the fine file.
To second Waynes comment do not "over deburr"! Your mission is to only remove the sharp raised section, do not chamfer the holes even a little.
Ralph Baker
PS - We just got back from Sebring Light Sport Exposition. Many intriguing planes but none with the internal volume and useful load of a 912 Rebel. Seems a missed opportunity for MAM. A 912 Rebel with two sleeping bags and pillows in back and a copy of Sparky Imesons book "Mountain Flying Bible" on one pillow would have said volumes.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
