Bob Patterson:
Further to our telephone conversation, you were suggesting a product called Everbrite as a possibility for use on floats. It sounds really interesting. Who was the person who had tried it, and what size of a project has he used it on? It seems that eurethane may not be the best choice for floats if the airplane is going to be in the water for any length of time, as it tends to form bubbles. Even if this Everbrite proves a bad choice, there doesn't seem to be too much to loose, as long as it doesn't actually cause corrosion, as it can be removed with acetone.
Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Everbrite
-
mike.davis
Everbrite
On 10/23/2005 11:18 AM, rebel-builders@dcsol.com wrote to MIKE DAVIS:
-> Bob Patterson:
->
-> Further to our telephone conversation, you were suggesting a product called
Everbrite as a possibility for use on floats. It sounds really interesting.
Who was the person who had tried it, and what size of a project has he used it
on? It seems that eurethane may not be the best choice for floats if the
airplane is going to be in the water for any length of time, as it tends to
form bubbles. Even if this Everbrite proves a bad choice, there doesn't seem
to be too much to loose, as long as it doesn't actually cause corrosion, as it
can be removed with acetone.
->
-> Anybody else got any experience with this stuff?
->
-> Al Hepburn
Used it to polish brass when I was in the Marines... worked good for that.
Mike
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-> Bob Patterson:
->
-> Further to our telephone conversation, you were suggesting a product called
Everbrite as a possibility for use on floats. It sounds really interesting.
Who was the person who had tried it, and what size of a project has he used it
on? It seems that eurethane may not be the best choice for floats if the
airplane is going to be in the water for any length of time, as it tends to
form bubbles. Even if this Everbrite proves a bad choice, there doesn't seem
to be too much to loose, as long as it doesn't actually cause corrosion, as it
can be removed with acetone.
->
-> Anybody else got any experience with this stuff?
->
-> Al Hepburn
Used it to polish brass when I was in the Marines... worked good for that.
Mike
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Bob Patterson
Everbrite
Hi Al !
You're right - I'd forgotten that Urethane paint is actually
porous - that's why it needs a really good primer coat under it !
I don't think paint will stick well to everbrite, though...
Mike Jones has used Everbrite on the whole inside of his Rebel -
he will be bringing a demo sample to the next Builders Meeting on
November 13th at Brampton. Everbrite is liquid Nylon, and the solvent
is naptha - so if you want to remove it later, just wipe with
naptha on a rag ! If it is scratched, just wipe over with
more Everbrite on a clean rag - it dissolves in smoothly !
Seems like the ideal stuff for shiny aluminum floats.
"Jones, Michael" <Michael.Jones@snclavalin.com>
It makes a very thin coating that seems to weigh very little,
yet protects for years outside. Good for copper, brass, and
aluminum ... ;-)
.....bobp
-------------------------------orig.-------------------------
On Sunday 23 October 2005 03:18 pm, Alan Hepburn wrote:
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any
length of time, as it tends to form bubbles. Even if this Everbrite proves
a bad choice, there doesn't seem to be too much to loose, as long as it
doesn't actually cause corrosion, as it can be removed with acetone.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
You're right - I'd forgotten that Urethane paint is actually
porous - that's why it needs a really good primer coat under it !
I don't think paint will stick well to everbrite, though...
Mike Jones has used Everbrite on the whole inside of his Rebel -
he will be bringing a demo sample to the next Builders Meeting on
November 13th at Brampton. Everbrite is liquid Nylon, and the solvent
is naptha - so if you want to remove it later, just wipe with
naptha on a rag ! If it is scratched, just wipe over with
more Everbrite on a clean rag - it dissolves in smoothly !
Seems like the ideal stuff for shiny aluminum floats.
"Jones, Michael" <Michael.Jones@snclavalin.com>
It makes a very thin coating that seems to weigh very little,
yet protects for years outside. Good for copper, brass, and
aluminum ... ;-)
.....bobp
-------------------------------orig.-------------------------
On Sunday 23 October 2005 03:18 pm, Alan Hepburn wrote:
called Everbrite as a possibility for use on floats. It sounds reallyBob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any
length of time, as it tends to form bubbles. Even if this Everbrite proves
a bad choice, there doesn't seem to be too much to loose, as long as it
doesn't actually cause corrosion, as it can be removed with acetone.
Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Dave Ricker
Everbrite
Al
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make it sound like a no-brainer for an adhesion promoting & corrosion preventing treatment. The military test report they quote make it sound better than alodine not to mention it has no hazmat issues.
Dave
Alan Hepburn wrote:
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make it sound like a no-brainer for an adhesion promoting & corrosion preventing treatment. The military test report they quote make it sound better than alodine not to mention it has no hazmat issues.
Dave
Alan Hepburn wrote:
--Bob Patterson:
Further to our telephone conversation, you were suggesting a product called Everbrite as a possibility for use on floats. It sounds really interesting. Who was the person who had tried it, and what size of a project has he used it on? It seems that eurethane may not be the best choice for floats if the airplane is going to be in the water for any length of time, as it tends to form bubbles. Even if this Everbrite proves a bad choice, there doesn't seem to be too much to loose, as long as it doesn't actually cause corrosion, as it can be removed with acetone.
Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
Everbrite
hi all
i used everbrite on inside of y rebel everywhere, because my kit was old
#007, and partially started it had sat long time in welding shop with little
heat and lots of dust, there was some surface corrosion on it, it cleaned it
up and coated it and now no sign of any corrosion, it great stuff, ir wings
just before closing top skin, took 15 minutes maybe, love the stuff, highly
recommend it for everyone, should wok on floats too
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Dave Ricker
Sent: Sunday, October 23, 2005 11:08 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Al
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make
it sound like a no-brainer for an adhesion promoting & corrosion preventing
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
Dave
Alan Hepburn wrote:
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
i used everbrite on inside of y rebel everywhere, because my kit was old
#007, and partially started it had sat long time in welding shop with little
heat and lots of dust, there was some surface corrosion on it, it cleaned it
up and coated it and now no sign of any corrosion, it great stuff, ir wings
just before closing top skin, took 15 minutes maybe, love the stuff, highly
recommend it for everyone, should wok on floats too
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Dave Ricker
Sent: Sunday, October 23, 2005 11:08 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Al
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make
it sound like a no-brainer for an adhesion promoting & corrosion preventing
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
Dave
Alan Hepburn wrote:
called Everbrite as a possibility for use on floats. It sounds reallyBob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
--Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Brian Breathnach
Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
it sound like a no-brainer for an adhesion promoting & corrosion preventingAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
Bob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
--Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Reed Britt Civ 309 MXSG/M
Everbrite
Scott Aldrich used it and loved it!! His paint also came out sweet - Still
waiting for him to share the pictures -
Britt
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Brian
Breathnach
Sent: Tuesday, October 25, 2005 10:15 AM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
waiting for him to share the pictures -
Britt
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Brian
Breathnach
Sent: Tuesday, October 25, 2005 10:15 AM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
it sound like a no-brainer for an adhesion promoting & corrosion preventingAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
Bob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
--Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
Everbrite
hi brain
i have used this stuff all over the place
its is totally different than the chromate we use, it has no strength to
hold sheets together, when i use it i assemble with wet chromate between
sheets then later on apply everbrite to all surfaces with a rag, it works
great is fast and lasts a long time, it stays flexible and never cracks or
peels off, i highly recommend it
mike #007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Tuesday, October 25, 2005 12:15 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
i have used this stuff all over the place
its is totally different than the chromate we use, it has no strength to
hold sheets together, when i use it i assemble with wet chromate between
sheets then later on apply everbrite to all surfaces with a rag, it works
great is fast and lasts a long time, it stays flexible and never cracks or
peels off, i highly recommend it
mike #007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Tuesday, October 25, 2005 12:15 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
it sound like a no-brainer for an adhesion promoting & corrosion preventingAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
Bob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
--Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
Everbrite
britt
did he use everbrite as a primer ??
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Reed Britt Civ 309 MXSG/MXRIE
Sent: Wednesday, October 26, 2005 12:23 PM
To: 'rebel-builders@dcsol.com'
Subject: RE: Everbrite
Scott Aldrich used it and loved it!! His paint also came out sweet - Still
waiting for him to share the pictures -
Britt
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Brian
Breathnach
Sent: Tuesday, October 25, 2005 10:15 AM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
did he use everbrite as a primer ??
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Reed Britt Civ 309 MXSG/MXRIE
Sent: Wednesday, October 26, 2005 12:23 PM
To: 'rebel-builders@dcsol.com'
Subject: RE: Everbrite
Scott Aldrich used it and loved it!! His paint also came out sweet - Still
waiting for him to share the pictures -
Britt
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Brian
Breathnach
Sent: Tuesday, October 25, 2005 10:15 AM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
it sound like a no-brainer for an adhesion promoting & corrosion preventingAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs make
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.
called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
Bob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.
--Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Bob Patterson
Everbrite
Hi Brian !
I think this product is meant as a paint primer, for large
surfaces. The beauty of Everbrite is that it's CLEAR - perfect
if you want a shiny aluminum float, or airplane.
Nothing beats the Polyfiber Epoxy Primer for bonding
pieces together !
.......bobp
-------------------------------orig.-------------------------
On Tuesday 25 October 2005 12:14 pm, Brian Breathnach wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I think this product is meant as a paint primer, for large
surfaces. The beauty of Everbrite is that it's CLEAR - perfect
if you want a shiny aluminum float, or airplane.
Nothing beats the Polyfiber Epoxy Primer for bonding
pieces together !
.......bobp
-------------------------------orig.-------------------------
On Tuesday 25 October 2005 12:14 pm, Brian Breathnach wrote:
sheets?Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum
makeAnyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
Al
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs
preventingit sound like a no-brainer for an adhesion promoting & corrosion
lengthtreatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
Bob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jesse Jenks
Everbrite
Can you just wipe it on without any prep work?
Jesse
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Jesse
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
Reply-To: <rebel-builders@dcsol.com>
To: "'rebel-builders@dcsol.com'" <rebel-builders@dcsol.com>
Subject: RE: Everbrite
Date: Wed, 26 Oct 2005 12:45:35 -0400
hi brain
i have used this stuff all over the place
its is totally different than the chromate we use, it has no strength to
hold sheets together, when i use it i assemble with wet chromate between
sheets then later on apply everbrite to all surfaces with a rag, it works
great is fast and lasts a long time, it stays flexible and never cracks or
peels off, i highly recommend it
mike #007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Tuesday, October 25, 2005 12:15 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum
sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
makeAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs
it sound like a no-brainer for an adhesion promoting & corrosion preventing
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
Bob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any
length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.--Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
Everbrite
jesse
you must clean and degrease surface before applying, acetone works or
another good cleaner such as the orange based cleaners, then just wipe on
and your done, its that simple
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jesse Jenks
Sent: Wednesday, October 26, 2005 1:01 PM
To: rebel-builders@dcsol.com
Subject: RE: Everbrite
Can you just wipe it on without any prep work?
Jesse
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
you must clean and degrease surface before applying, acetone works or
another good cleaner such as the orange based cleaners, then just wipe on
and your done, its that simple
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jesse Jenks
Sent: Wednesday, October 26, 2005 1:01 PM
To: rebel-builders@dcsol.com
Subject: RE: Everbrite
Can you just wipe it on without any prep work?
Jesse
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
Reply-To: <rebel-builders@dcsol.com>
To: "'rebel-builders@dcsol.com'" <rebel-builders@dcsol.com>
Subject: RE: Everbrite
Date: Wed, 26 Oct 2005 12:45:35 -0400
hi brain
i have used this stuff all over the place
its is totally different than the chromate we use, it has no strength to
hold sheets together, when i use it i assemble with wet chromate between
sheets then later on apply everbrite to all surfaces with a rag, it works
great is fast and lasts a long time, it stays flexible and never cracks or
peels off, i highly recommend it
mike #007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Tuesday, October 25, 2005 12:15 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum
sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
makeAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs
it sound like a no-brainer for an adhesion promoting & corrosion preventing
treatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
Bob Patterson:
Further to our telephone conversation, you were suggesting a product
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any
length
of time, as it tends to form bubbles. Even if this Everbrite proves a bad
choice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.--Anybody else got any experience with this stuff?
Al Hepburn
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Brian Breathnach
Everbrite
Good Morning Bob
OK, got it--thanx
Brian
----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, October 26, 2005 9:50 AM
Subject: Re: Everbrite
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
OK, got it--thanx
Brian
----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, October 26, 2005 9:50 AM
Subject: Re: Everbrite
shearHi Brian !
I think this product is meant as a paint primer, for large
surfaces. The beauty of Everbrite is that it's CLEAR - perfect
if you want a shiny aluminum float, or airplane.
Nothing beats the Polyfiber Epoxy Primer for bonding
pieces together !
.......bobp
-------------------------------orig.-------------------------
On Tuesday 25 October 2005 12:14 pm, Brian Breathnach wrote:Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and
thansheets?performance as the chrommate based primers when applied between alummakeAnyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
Al
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labspreventingit sound like a no-brainer for an adhesion promoting & corrosiontreatment. The military test report they quote make it sound better
badlengthalodine not to mention it has no hazmat issues.called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for anyof time, as it tends to form bubbles. Even if this Everbrite proves a
doesn'tchoice, there doesn't seem to be too much to loose, as long as it
actually cause corrosion, as it can be removed with acetone.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jesse Jenks
Everbrite
Mike,
Just clean with solvent, but no Scotchbrighting required? What do you do on
interior surfaces that will get epoxy primer in the joint, and Everbright
everywhere else? For example, when putting the top skin on the wing, would
you mask off all the rib/spar/stringer locations, apply the Everbright, let
it dry then peel the tape and apply epoxy primer to the joint areas just
before riveting?
Jesse
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Just clean with solvent, but no Scotchbrighting required? What do you do on
interior surfaces that will get epoxy primer in the joint, and Everbright
everywhere else? For example, when putting the top skin on the wing, would
you mask off all the rib/spar/stringer locations, apply the Everbright, let
it dry then peel the tape and apply epoxy primer to the joint areas just
before riveting?
Jesse
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
Reply-To: <rebel-builders@dcsol.com>
To: "'rebel-builders@dcsol.com'" <rebel-builders@dcsol.com>
Subject: RE: Everbrite
Date: Wed, 26 Oct 2005 13:06:10 -0400
jesse
you must clean and degrease surface before applying, acetone works or
another good cleaner such as the orange based cleaners, then just wipe on
and your done, its that simple
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jesse Jenks
Sent: Wednesday, October 26, 2005 1:01 PM
To: rebel-builders@dcsol.com
Subject: RE: Everbrite
Can you just wipe it on without any prep work?
Jesse
orFrom: "Jones, Michael" <Michael.Jones@snclavalin.com>
Reply-To: <rebel-builders@dcsol.com>
To: "'rebel-builders@dcsol.com'" <rebel-builders@dcsol.com>
Subject: RE: Everbrite
Date: Wed, 26 Oct 2005 12:45:35 -0400
hi brain
i have used this stuff all over the place
its is totally different than the chromate we use, it has no strength to
hold sheets together, when i use it i assemble with wet chromate between
sheets then later on apply everbrite to all surfaces with a rag, it works
great is fast and lasts a long time, it stays flexible and never crackspreventingpeels off, i highly recommend it
mike #007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Tuesday, October 25, 2005 12:15 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum
sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
makeAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs
it sound like a no-brainer for an adhesion promoting & corrosionbadtreatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any
length
of time, as it tends to form bubbles. Even if this Everbrite proves achoice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.--
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
Everbrite
Jesse
for closing wing that's what you would could do, although main purpose of
cromate is to keep moisture out it does provide some strength, you could
apply everbrite over the skin them cromate on top of everbrite, would reduce
the strength but sure would never corrode
as for inside of fus and wings assemble and rivet everything then slop in
the everbrite with rag everywhere, does not matter if it runs a little, but
keep it clear of pro seal as naphtha would dissolve proseal i am guessing
easy eh ??
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jesse Jenks
Sent: Wednesday, October 26, 2005 1:17 PM
To: rebel-builders@dcsol.com
Subject: RE: Everbrite
Mike,
Just clean with solvent, but no Scotchbrighting required? What do you do on
interior surfaces that will get epoxy primer in the joint, and Everbright
everywhere else? For example, when putting the top skin on the wing, would
you mask off all the rib/spar/stringer locations, apply the Everbright, let
it dry then peel the tape and apply epoxy primer to the joint areas just
before riveting?
Jesse
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
for closing wing that's what you would could do, although main purpose of
cromate is to keep moisture out it does provide some strength, you could
apply everbrite over the skin them cromate on top of everbrite, would reduce
the strength but sure would never corrode
as for inside of fus and wings assemble and rivet everything then slop in
the everbrite with rag everywhere, does not matter if it runs a little, but
keep it clear of pro seal as naphtha would dissolve proseal i am guessing
easy eh ??
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jesse Jenks
Sent: Wednesday, October 26, 2005 1:17 PM
To: rebel-builders@dcsol.com
Subject: RE: Everbrite
Mike,
Just clean with solvent, but no Scotchbrighting required? What do you do on
interior surfaces that will get epoxy primer in the joint, and Everbright
everywhere else? For example, when putting the top skin on the wing, would
you mask off all the rib/spar/stringer locations, apply the Everbright, let
it dry then peel the tape and apply epoxy primer to the joint areas just
before riveting?
Jesse
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
Reply-To: <rebel-builders@dcsol.com>
To: "'rebel-builders@dcsol.com'" <rebel-builders@dcsol.com>
Subject: RE: Everbrite
Date: Wed, 26 Oct 2005 13:06:10 -0400
jesse
you must clean and degrease surface before applying, acetone works or
another good cleaner such as the orange based cleaners, then just wipe on
and your done, its that simple
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jesse Jenks
Sent: Wednesday, October 26, 2005 1:01 PM
To: rebel-builders@dcsol.com
Subject: RE: Everbrite
Can you just wipe it on without any prep work?
Jesse
orFrom: "Jones, Michael" <Michael.Jones@snclavalin.com>
Reply-To: <rebel-builders@dcsol.com>
To: "'rebel-builders@dcsol.com'" <rebel-builders@dcsol.com>
Subject: RE: Everbrite
Date: Wed, 26 Oct 2005 12:45:35 -0400
hi brain
i have used this stuff all over the place
its is totally different than the chromate we use, it has no strength to
hold sheets together, when i use it i assemble with wet chromate between
sheets then later on apply everbrite to all surfaces with a rag, it works
great is fast and lasts a long time, it stays flexible and never crackspreventingpeels off, i highly recommend it
mike #007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Tuesday, October 25, 2005 12:15 PM
To: rebel-builders@dcsol.com
Subject: Re: Everbrite
Hi Al,
Interesting product.
Would you know if the product has the same (or better) adhesive and shear
performance as the chrommate based primers when applied between alum
sheets?
Anyone out there use it yet?
Thanx
Brian
779R
----- Original Message -----
From: "Dave Ricker" <daricker@chebucto.ns.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 23, 2005 8:08 PM
Subject: Re: Everbrite
makeAl
You might want to check this stuff out:
http://www.pantheonchemical.com/PreKote.htm
I probably heard of it here but the test reports by the military/labs
it sound like a no-brainer for an adhesion promoting & corrosionbadtreatment. The military test report they quote make it sound better than
alodine not to mention it has no hazmat issues.called Everbrite as a possibility for use on floats. It sounds reallyDave
Alan Hepburn wrote:
interesting. Who was the person who had tried it, and what size of a
project has he used it on? It seems that eurethane may not be the best
choice for floats if the airplane is going to be in the water for any
length
of time, as it tends to form bubbles. Even if this Everbrite proves achoice, there doesn't seem to be too much to loose, as long as it doesn't
actually cause corrosion, as it can be removed with acetone.--
David A. Ricker
Fall River, Nova Scotia
Canada
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
