hand rivet squeezer

[Dale Fultz]

I am in need of a squeezer that I can dimple around firewall and some
other use. Can any of you guys with experience tell which one you prefer
to buy ??? Is one better than another??? Any help would be appreciated
before I buy one that is not right for the job at hand. Thanks Dale



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

I have two that I really like. The least expensive is the one that has a
male and female die with a nail through it, and pull it with your hand rivet
puller, the other is a pair of vice grips with dimple dies. Both are
inexpensive. Check www.aircraft-tool.com they have other options also.
Al
----- Original Message -----
From: "Dale Fultz" <dfultz@countryilink.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, December 12, 2004 4:33 PM
Subject: hand rivet squeezer

I am in need of a squeezer that I can dimple around firewall and some
other use. Can any of you guys with experience tell which one you prefer
to buy ??? Is one better than another??? Any help would be appreciated
before I buy one that is not right for the job at hand. Thanks Dale



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Joel Jacobs]

I have the two dies and a nail one and it's been working great. You may
already know this but be sure to dimple BEFORE you drill out the holes to
#30. They get bigger when you dimple them..
Joel

----- Original Message -----
From: "Dale Fultz" <dfultz@countryilink.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, December 12, 2004 7:33 PM
Subject: hand rivet squeezer

I am in need of a squeezer that I can dimple around firewall and some
other use. Can any of you guys with experience tell which one you prefer
to buy ??? Is one better than another??? Any help would be appreciated
before I buy one that is not right for the job at hand. Thanks Dale



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Warren & Marg Montgomery]

Why hand? Build up the 1/8" holed nut of the pheumatic riveter with tape
to same dia as die, then tape die to nut.

Joel Jacobs wrote:

I have the two dies and a nail one and it's been working great. You may
already know this but be sure to dimple BEFORE you drill out the holes to
#30. They get bigger when you dimple them..
Joel

----- Original Message -----
From: "Dale Fultz" <dfultz@countryilink.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, December 12, 2004 7:33 PM
Subject: hand rivet squeezer

I am in need of a squeezer that I can dimple around firewall and some
other use. Can any of you guys with experience tell which one you prefer
to buy ??? Is one better than another??? Any help would be appreciated
before I buy one that is not right for the job at hand. Thanks Dale



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Warren & Marg Montgomery]

Drilling to 1/8" then dimpling gives close to #30

Joel Jacobs wrote:

I have the two dies and a nail one and it's been working great. You may
already know this but be sure to dimple BEFORE you drill out the holes to
#30. They get bigger when you dimple them..
Joel

----- Original Message -----
From: "Dale Fultz" <dfultz@countryilink.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, December 12, 2004 7:33 PM
Subject: hand rivet squeezer

I am in need of a squeezer that I can dimple around firewall and some
other use. Can any of you guys with experience tell which one you prefer
to buy ??? Is one better than another??? Any help would be appreciated
before I buy one that is not right for the job at hand. Thanks Dale



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------