The Murphy Builders Site

Are the Murphy rivet numbers like RV 1410, etc manufactures number as well as part number?
I have not been able to find the 1400 series, nor any that start with RV. Is there a cross reference listing ? Where do you buy your rivets in the US?

Sorry if discussed before, I can't get into the archives.

Thanks,
larry

ACS this part no. for RV1410

https://www.aircraftspruce.com/search/s ... 01601-0410

Ljm wrote: ↑

Tue Jun 02, 2020 2:51 pm

Sorry if discussed before, I can't get into the archives.

Thanks,
larry

Larry can you elaborate? If somethings not working I'd like to know.

G-Day Larry , I have just ordered some .
Avex 1661 series Aluminiun/steel Pan heads Part no 01661-00410 will do 0.8 to 4.3 mm 1/8 in
Avex 1604 series Aluminium/steel Countersunk heads Part no 01604-00412 2.4 to 6.3 mm
Cheers
Tim

The Aircraft Spruce 1601-1410 rivet has a smaller diameter head. Should do just fine on inside such as floor. 1601-1414 same but longer grip length.

Do a search for avex rivets and then narrow down to head diameter your looking for. Do you have a supplier named Fastenall? The correct rivets can be obtained from Mattic Industries in Vancouver British Columbier. They supply Murphy I'm told.

Rivet prices from Fastenal are quite a bit less than Aircraft Spruce in Canada

Thank you!

Should I have been able to find this out in the plans? This meaning 1601 series is the 1410? I haven't been too successful googleing.. :( I did find this site https://www.rivetsonline.com/documents/ ... igrips.pdf which has different numbers.

Thanks again!

order from Mattic, that where I got mine.

Ray Mason wrote: ↑

Tue Jun 02, 2020 5:21 pm

order from Mattic, that where I got mine.

Lawson Products bought Mattic, so you'll end up talking with them.

https://catalogs.lawsonproducts.com/law ... 2019/7-12/

From the manufacturer's web site:

http://www.avdel-global.com/fileadmin/u ... 2_2015.pdf

Page 77 presents the 1661 series.

Cheers,

Dave
Elite583