Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Rivet Education

General building discussions, not model specific.
Post Reply
Ljm
Posts: 99
Joined: Mon May 11, 2020 5:13 am

Rivet Education

Post by Ljm » Tue Jun 02, 2020 2:51 pm

Are the Murphy rivet numbers like RV 1410, etc manufactures number as well as part number?
I have not been able to find the 1400 series, nor any that start with RV. Is there a cross reference listing ? Where do you buy your rivets in the US?

Sorry if discussed before, I can't get into the archives.

Thanks,
larry
larry
Elite project
C77 Il

Flygirl
Posts: 122
Joined: Mon Jun 19, 2017 8:40 pm

Re: Rivet Education

Post by Flygirl » Tue Jun 02, 2020 3:33 pm


User avatar
mikefairbanks
Site Admin
Posts: 235
Joined: Fri Feb 17, 2012 3:45 pm
Location: Fairbanks, Alaska
Contact:

Re: Rivet Education

Post by mikefairbanks » Tue Jun 02, 2020 3:44 pm

Ljm wrote:
Tue Jun 02, 2020 2:51 pm
Sorry if discussed before, I can't get into the archives.

Thanks,
larry
Larry can you elaborate? If somethings not working I'd like to know.
Mike Davis
Fairbanks, Alaska
"I'd rather be flying!"

Tim Graham
Posts: 111
Joined: Wed Jun 03, 2015 8:45 am

Re: Rivet Education

Post by Tim Graham » Tue Jun 02, 2020 4:24 pm

G-Day Larry , I have just ordered some .
Avex 1661 series Aluminiun/steel Pan heads Part no 01661-00410 will do 0.8 to 4.3 mm 1/8 in
Avex 1604 series Aluminium/steel Countersunk heads Part no 01604-00412 2.4 to 6.3 mm
Cheers
Tim

Rebel 449
Posts: 54
Joined: Thu Feb 23, 2012 5:18 am
Location: Conception Bay South, Newfoundland, Canada

Re: Rivet Education

Post by Rebel 449 » Tue Jun 02, 2020 4:25 pm

The Aircraft Spruce 1601-1410 rivet has a smaller diameter head. Should do just fine on inside such as floor. 1601-1414 same but longer grip length.

Do a search for avex rivets and then narrow down to head diameter your looking for. Do you have a supplier named Fastenall? The correct rivets can be obtained from Mattic Industries in Vancouver British Columbier. They supply Murphy I'm told.


Ahewko
Posts: 228
Joined: Sun Feb 26, 2012 6:47 am
Location: Neilburg, SK Canada

Re: Rivet Education

Post by Ahewko » Tue Jun 02, 2020 5:04 pm

Rivet prices from Fastenal are quite a bit less than Aircraft Spruce in Canada

Ljm
Posts: 99
Joined: Mon May 11, 2020 5:13 am

Re: Rivet Education

Post by Ljm » Tue Jun 02, 2020 5:12 pm

Thank you!

Should I have been able to find this out in the plans? This meaning 1601 series is the 1410? I haven't been too successful googleing.. :( I did find this site https://www.rivetsonline.com/documents/ ... igrips.pdf which has different numbers.

Thanks again!
larry
Elite project
C77 Il

Ray Mason
Posts: 205
Joined: Thu May 24, 2012 2:57 pm

Re: Rivet Education

Post by Ray Mason » Tue Jun 02, 2020 5:21 pm

order from Mattic, that where I got mine.

Flygirl
Posts: 122
Joined: Mon Jun 19, 2017 8:40 pm

Re: Rivet Education

Post by Flygirl » Tue Jun 02, 2020 8:58 pm

Ray Mason wrote:
Tue Jun 02, 2020 5:21 pm
order from Mattic, that where I got mine.
Lawson Products bought Mattic, so you'll end up talking with them.

https://catalogs.lawsonproducts.com/law ... 2019/7-12/

Elite583
Posts: 184
Joined: Wed Feb 29, 2012 9:11 pm

Re: Rivet Education

Post by Elite583 » Wed Jun 03, 2020 6:37 am

From the manufacturer's web site:

http://www.avdel-global.com/fileadmin/u ... 2_2015.pdf

Page 77 presents the 1661 series.

Cheers,

Dave
Elite583 8)


Post Reply