Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Prop Governor Control Bracket

General building discussions, not model specific.
Post Reply
User avatar
Jerry Folkerts
Posts: 446
Joined: Tue Feb 21, 2012 5:57 pm
Location: Pagosa Springs, Colorado
Contact:
Contact Jerry Folkerts

Prop Governor Control Bracket

Post by Jerry Folkerts » Sun Feb 26, 2017 12:21 pm

I am going mad trying to figure out how to secure the control going to the prop governor on my Super Rebel. I have a narrow deck Lycoming O-540 A1D5 with a Hartzell V-3-7 Prop Governor. A picture would be wonderful. This engine came off a Piper Comanche 250. I've attached a picture of my setup below. The control cable will have to go down and to the right in the picture. Please help!
IMG_4604.JPG
Thanks,
Jerry Folkerts
Jerry Folkerts
SW Colorado
SR 2500 #093
http://www.mykitlog.com/jfolkerts
http://www.thepedalrv.com
Top
Post Reply

Return to “All Models”