Rebel Ramble 2005 - and low compression
Posted: Mon Feb 20, 2012 5:46 am
Hi Phil !
If it just developed low compression, before you tear it down,
just run over to Leavens and get a can of AvBlend - pour it into
the oil, and fly for about an hour. You will be amazed - compression
will likely return !!
Have used AvBlend many times over the years - some say it's
good to add every oil change. It's a very thin oil liquid that penetrates
into the pores of the metal, improving lubrication and helping preserve.
Good to put some in before winter storage....
Often, engines develop sticky valves or rings when not flown
enough (100+ hours/year) - and the compression goes down. Have
seen many engines restored to new with just one can !
Hope that does it, and you can come for the whole trip, but ALL
are welcome to join up for even a day or 2 !! :-)
.......bobp
-------------------------------orig.-------------------------
On Wednesday 06 July 2005 01:47 pm, Phil Stubley wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
If it just developed low compression, before you tear it down,
just run over to Leavens and get a can of AvBlend - pour it into
the oil, and fly for about an hour. You will be amazed - compression
will likely return !!
Have used AvBlend many times over the years - some say it's
good to add every oil change. It's a very thin oil liquid that penetrates
into the pores of the metal, improving lubrication and helping preserve.
Good to put some in before winter storage....
Often, engines develop sticky valves or rings when not flown
enough (100+ hours/year) - and the compression goes down. Have
seen many engines restored to new with just one can !
Hope that does it, and you can come for the whole trip, but ALL
are welcome to join up for even a day or 2 !! :-)
.......bobp
-------------------------------orig.-------------------------
On Wednesday 06 July 2005 01:47 pm, Phil Stubley wrote:
Hi Bob,
Sorry to tell you but my bird is giving me trouble. First I did a hard
landing, fixed the gear leg, and now I have a bad cylinder. So will do a
compression check to define the problem. Then go from there.
Don't feel to comfortable about venturing far with a new or remodelled
cylinder, and an old geezer like me.
May try to fly with you for the first part. Tobermory, Gore bay and fish
and chips are close to home, (cottage) so may venture there.
Will let you know how the fix turns out.
Phil.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------