The Murphy Builders Site

Hi all. I have inquired about this before, but still have not resolved it. I
have a Lamar alternator with a Denso IC regulator built in, which came from
Murphy on a firewall forward incomplete package. It has one main bolt type
terminal and a plug with a green and yellow wire. I need to know 1/ is a
voltage regulator required with this unit, and 2/ can anyone help with a
wiring diagram? I have contacted both Lamar and Denso with no responses. Any
help would be greatly appreciated - I have given up on trying getting info
from Murphy. Thanks. Bob J ( Rebel 725)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hello again: Problem solved. A 2nd email to Lamar resulted in a complete
manual for the alternator received within the hour. Thanks to all who
responded. Bob J

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Bob
and Olga Johnson
Sent: August-24-09 9:07 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Alternator and Reg.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------