[rebel-builders] Avionics shelf in tail - mounting AHRS unit etc
Posted: Sun Feb 19, 2012 5:25 pm
Thanks guys. -Jason
--- On Sun, 5/3/09, Bob Palmer <rtpalmer@shaw.ca> wrote:
--- On Sun, 5/3/09, Bob Palmer <rtpalmer@shaw.ca> wrote:
Rebel?From: Bob Palmer <rtpalmer@shaw.ca>
Subject: Re: [rebel-builders] Avionics shelf in tail - mounting AHRS unit etc
To: rebel-builders@dcsol.com
Date: Sunday, May 3, 2009, 11:27 PM
Jason,
I am installing dual Blue Mountain Sport in my Elite. Yes
the
magnetometers should be level although there is a "set
level" software
function that is supposed to take care of discrepancies of
up to 10
degrees. On this setup the AHRS is a single unit with the
display but
the mags are seperate are quite small. I was able to mount
one in each
wing directly to the skin using shims at one end.
Bob
Guys,
Has anyone installed an EFIS in their Moose or