[rebel-builders] rebel elevator mods
Posted: Sun Feb 19, 2012 5:24 pm
Andrew,
This mailing list will not transmit attachments to the list, so your picture
didn't come to me or others via the list.
If we're referring to the same mod, my elevator rib stiffeners connect to
the elevator tube with three rivets. One under the corners of the top and
bottom skins, and one in the aft side middle of the tube. See two pics
starting at *http://tinyurl.com/cgru4z*
I hope this helps.
Ron
254R
http://n254mr.com
On Sat, Apr 25, 2009 at 5:09 PM, Andrew Byers <andrewbyers@hotmail.com>wrote:
[quote]
Hi
It's now time for the elevators that the previous builder built, took
apart, and re-ordered most of the peices... I have read all the posts and
viewed all the files I could find on the elevator mods as well as seen what
the previous builder did when he built them, The skin doublers look pretty
straight forward, but the rib stiffner I would like a second opinion on. I
have attached a picture of what I think would work from reading the posts,
would I be better to have 2 rivets attaching it to the tube? Any input would
be apreciated.
Thanks
Andrew
Rebel 779
_________________________________________________________________
Create a cool, new character for your Windows Live
This mailing list will not transmit attachments to the list, so your picture
didn't come to me or others via the list.
If we're referring to the same mod, my elevator rib stiffeners connect to
the elevator tube with three rivets. One under the corners of the top and
bottom skins, and one in the aft side middle of the tube. See two pics
starting at *http://tinyurl.com/cgru4z*
I hope this helps.
Ron
254R
http://n254mr.com
On Sat, Apr 25, 2009 at 5:09 PM, Andrew Byers <andrewbyers@hotmail.com>wrote:
[quote]
Hi
It's now time for the elevators that the previous builder built, took
apart, and re-ordered most of the peices... I have read all the posts and
viewed all the files I could find on the elevator mods as well as seen what
the previous builder did when he built them, The skin doublers look pretty
straight forward, but the rib stiffner I would like a second opinion on. I
have attached a picture of what I think would work from reading the posts,
would I be better to have 2 rivets attaching it to the tube? Any input would
be apreciated.
Thanks
Andrew
Rebel 779
_________________________________________________________________
Create a cool, new character for your Windows Live