[rebel-builders] New issue FUS-30 thickness and FUS-30 doubler
Posted: Sun Feb 19, 2012 5:24 pm
If there are any poor souls out there who decide to do the FUS-30 doubler
after the tailcone has been done... some of the gory details of my
"technique" are shown in a half dozen photos starting at *
http://tinyurl.com/cbnpza* .
This was back in the summer of '06, one of my first attempts after acquiring
the project to mangle metal. It wasn't easy, but I successfully mangled this
metal, several times. Since then, I have become more efficient at destroying
metal.
Ron*
*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
after the tailcone has been done... some of the gory details of my
"technique" are shown in a half dozen photos starting at *
http://tinyurl.com/cbnpza* .
This was back in the summer of '06, one of my first attempts after acquiring
the project to mangle metal. It wasn't easy, but I successfully mangled this
metal, several times. Since then, I have become more efficient at destroying
metal.
Ron*
*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------