[rebel-builders] Ontario Mods
Posted: Sun Feb 19, 2012 5:21 pm
I did not upgrade my Fus-25 as I don't think it sees near the load that
the Fus-26 does but it is a small part if it makes one feel better.
Fus-26 under the door is worth upping to .032 with some stringers behind
it IMO but .040 also seems popular. I upped mine to .025 with two
diagonal stringers and have had no trouble and no oil canning so I
suspect .032 is quite sufficient.
Ken
snowyrvr@mtaonline.net wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
the Fus-26 does but it is a small part if it makes one feel better.
Fus-26 under the door is worth upping to .032 with some stringers behind
it IMO but .040 also seems popular. I upped mine to .025 with two
diagonal stringers and have had no trouble and no oil canning so I
suspect .032 is quite sufficient.
Ken
snowyrvr@mtaonline.net wrote:
Someone said one of the needed mods was to replace FUS-25 with an .040
piece. I've seen doubling FUS-26 or replacing it with .040 but not FUS-25.
Anyone shed some light?
Thanks.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------