MAM Brake caliper fittings
Posted: Sun Feb 19, 2012 5:21 pm
Hi All
On the MAM spring gear brake callipers, mine both came with a NPT threaded
hole for attaching the supply, and a prefitted brass bleed nipple that also
looks like it's an NPT threaded assembly.
If the calliper is just a chamber then I should be OK to move the bleed
nipple to the other hole on one side of the aircraft to allow easier routing
of the supply line ?
Good idea or am I missing something ?
Ta
Nig
745E
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
On the MAM spring gear brake callipers, mine both came with a NPT threaded
hole for attaching the supply, and a prefitted brass bleed nipple that also
looks like it's an NPT threaded assembly.
If the calliper is just a chamber then I should be OK to move the bleed
nipple to the other hole on one side of the aircraft to allow easier routing
of the supply line ?
Good idea or am I missing something ?
Ta
Nig
745E
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------