The Murphy Builders Site

you've probably got the right part but instead of the doubler sticking down
rivet it on the flat to the flap rib and the first bulkhead behind the spar
carrythrough mines abour 2"x4" with the back corner cut off.
Drew

At 03:21 PM 10/14/00 -0230, you wrote:

I just got around to starting the flaperon teleflex cable installation

today and have

noticed that some detail is missing. The procedure refers to a 'teleflex

retainer

(31509)' ... now I'm guessing that would be 1 of the 2 clamps (different

part #) that fit

nicely around the cable ..? Or, am I missing something? Also, what is

the dimension or

shape of the .125 doubler we are to make for attaching this retainer. I

would guess that

the doubler should be rectangular or maybe triangular in shape, with a few

rivets

attaching it to the flap rib, extending down below the rib about 1 inch

... close?

Please advise.
Thanks.
Clay








*--------------------------------------------------------------------------

---------*

The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*--------------------------------------------------------------------------

---------*
-----------------------------------------------------
Click here for Free Video!!
http://www.gohip.com/freevideo/

*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I just got around to starting the flaperon teleflex cable installation today and have
noticed that some detail is missing. The procedure refers to a 'teleflex retainer
(31509)' ... now I'm guessing that would be 1 of the 2 clamps (different part #) that fit
nicely around the cable ..? Or, am I missing something? Also, what is the dimension or
shape of the .125 doubler we are to make for attaching this retainer. I would guess that
the doubler should be rectangular or maybe triangular in shape, with a few rivets
attaching it to the flap rib, extending down below the rib about 1 inch ... close?
Please advise.
Thanks.
Clay








*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------