The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

[rebel-builders] Drawings chapter 20

https://www.murphybuilders.net/viewtopic.php?f=1&t=9553

Page 1 of 1

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:07 pm
by gleeso
Mine's the same, and so is the CD, FWIW 20.8.8 has the dims, but no
drwg, both on the CD and the manual.
John Gleeson.
Rebel 804 down under


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.7/1894 - Release Date: 1/14/2009 7:27 PM


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:07 pm
by Charlie Eubanks
I am a little confused. Fig 20.11.5 in my manual just shows the assembly of
the rudder cable, cable shackles and clevis pin. No dimensions required. My
Fig.20.8.8 gives the construction dimensions of the elevator pus pull
tubes.
Charlie E. 802R
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 14, 2009 9:47 PM
Subject: [rebel-builders] Drawings chapter 20

Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:11 pm
by Rebecca Brownell
Hi charlie ,it the rudder cable assembly figure that I need fig 20.11.5.
any way you could put that on an email?
thanks
jason
On 15-Jan-09, at 10:16 AM, Charlie Eubanks wrote:
I am a little confused. Fig 20.11.5 in my manual just shows the
assembly of
the rudder cable, cable shackles and clevis pin. No dimensions
required. My
Fig.20.8.8 gives the construction dimensions of the elevator pus pull
tubes.
Charlie E. 802R
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 14, 2009 9:47 PM
Subject: [rebel-builders] Drawings chapter 20

Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:11 pm
by Ken
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:11 pm
by Charlie Eubanks
Looks like Ken has got you covered
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, January 15, 2009 11:38 AM
Subject: Re: [rebel-builders] Drawings chapter 20

Hi charlie ,it the rudder cable assembly figure that I need fig 20.11.5.
any way you could put that on an email?
thanks
jason
On 15-Jan-09, at 10:16 AM, Charlie Eubanks wrote:
I am a little confused. Fig 20.11.5 in my manual just shows the
assembly of
the rudder cable, cable shackles and clevis pin. No dimensions
required. My
Fig.20.8.8 gives the construction dimensions of the elevator pus pull
tubes.
Charlie E. 802R
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 14, 2009 9:47 PM
Subject: [rebel-builders] Drawings chapter 20

Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:12 pm
by Tim Hickey
Just a caution on this upload.
My computer would not directly download that file. It will download pictures
directly, but not that file. I had to right click it, and then do a "save
as" command. Then I could open and view it.

Computers: just one more of life's mysteries.

Tim Hickey
R 808


----- Original Message -----
From: "Ron Shannon" <rshannon@cruzcom.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 19, 2009 8:13 PM
Subject: Re: [rebel-builders] Drawings chapter 20

On the Rebel Builder's Site (https://www.dcsol.com/rebel.htm) in the
Files,
Rebel, Control Systems section.

Ron


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:12 pm
by Rebecca Brownell
AH!
Thanks
On 19-Jan-09, at 9:13 PM, Ron Shannon wrote:
On the Rebel Builder's Site (https://www.dcsol.com/rebel.htm) in the
Files,
Rebel, Control Systems section.

Ron



On Mon, Jan 19, 2009 at 6:06 PM, Rebecca Brownell
<brownell@candlelight.ca>wrote:
Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:12 pm
by Rebecca Brownell
Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:12 pm
by Ron Shannon
On the Rebel Builder's Site (https://www.dcsol.com/rebel.htm) in the Files,
Rebel, Control Systems section.

Ron



On Mon, Jan 19, 2009 at 6:06 PM, Rebecca Brownell
<brownell@candlelight.ca>wrote:
Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:12 pm
by Charlie Eubanks
I was able to open the drawing but I have a question for Ken. Where did you
get the drawing that you up loaded and how did you get it in color?
Charlie
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 19, 2009 8:06 PM
Subject: Re: [rebel-builders] Drawings chapter 20

Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Drawings chapter 20

Posted: Sun Feb 19, 2012 5:12 pm
by Ken
Well I found it in the file 'D:\Rebel2000\technical\20 Controls.doc'
dated 6/8/2000 on what was a very early CD copy of the Manual. Looks
liked I got it in 2000.

The first time I looked at the copy of the file on my hard drive it was
also missing the diagram. It will probably disappear again if I clear
the memory cache. I only have Word2000, which judging by the dates, may
be the version of word that originally made the file.

Ken

Charlie Eubanks wrote:
I was able to open the drawing but I have a question for Ken. Where did you
get the drawing that you up loaded and how did you get it in color?
Charlie
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 19, 2009 8:06 PM
Subject: Re: [rebel-builders] Drawings chapter 20

Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/