Dimentions-dash
Posted: Sun Feb 19, 2012 5:07 pm
Hi all
I need to double check some measurements.I'm installing the dash
braces and they aren't lining up just right.
I moved the firewall back as per manual and wanted to know the
distance from the face of the pannel to the firewall,
or from the rear edge of the upright's on the cage to the face of the
pannel.The problem is the angle of the bends in the dash
pannel have changed when shortening and the braces don"t meet in the
middle of the firewall.If someone wouldn't mind checking those
dimensions for me it would tell me what the heck is going
under there.
Appreciate the help
Jason
817R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I need to double check some measurements.I'm installing the dash
braces and they aren't lining up just right.
I moved the firewall back as per manual and wanted to know the
distance from the face of the pannel to the firewall,
or from the rear edge of the upright's on the cage to the face of the
pannel.The problem is the angle of the bends in the dash
pannel have changed when shortening and the braces don"t meet in the
middle of the firewall.If someone wouldn't mind checking those
dimensions for me it would tell me what the heck is going
under there.
Appreciate the help
Jason
817R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------