Arlington, Ramble, Oshkosh and Beyond
Posted: Sun Feb 19, 2012 5:07 pm
I'm looking forward to Arlington this year. I was trying to be finished in
time this year. I met Steve Sloan and Dick Vanderwicken for the first time a
week or so ago. Great guys and a great place to watch the show.
After Arlington, it is on to Oshkosh, so we will likely hook up with the
Rebel Ramble for that leg. Also considering flying down the entire Missouri
River retracing Louis and Clark's Expedition.
Love to see your mountain lakes in B.C. I have some experience flying in
B.C. but only in a landplane.
Eric
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Walter
Klatt
Sent: Sunday, November 30, 2008 8:01 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Rebel Instrument Panel - Dynon D180
Very nice panel, indeed, Eric. Looking forward to seeing your plane, maybe
at Arlington next year. Also good to have another floatplane here in this
corner of the world, and will have to get you up to Canada to check out some
of our favourite spots.
I originally did my panel to be removable with screws. Then I recently redid
a few things including installing a new radio and transponder. However, I
found that I really couldn't pull it more than about an inch or so at any
spot, without some major work with the wiring and controls. So I ended up
doing the change with the panel in place. Was a bit of a pain, getting my
head under there, but I still think it was easier than taking it all off.
Walter
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
time this year. I met Steve Sloan and Dick Vanderwicken for the first time a
week or so ago. Great guys and a great place to watch the show.
After Arlington, it is on to Oshkosh, so we will likely hook up with the
Rebel Ramble for that leg. Also considering flying down the entire Missouri
River retracing Louis and Clark's Expedition.
Love to see your mountain lakes in B.C. I have some experience flying in
B.C. but only in a landplane.
Eric
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Walter
Klatt
Sent: Sunday, November 30, 2008 8:01 AM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Rebel Instrument Panel - Dynon D180
Very nice panel, indeed, Eric. Looking forward to seeing your plane, maybe
at Arlington next year. Also good to have another floatplane here in this
corner of the world, and will have to get you up to Canada to check out some
of our favourite spots.
I originally did my panel to be removable with screws. Then I recently redid
a few things including installing a new radio and transponder. However, I
found that I really couldn't pull it more than about an inch or so at any
spot, without some major work with the wiring and controls. So I ended up
doing the change with the panel in place. Was a bit of a pain, getting my
head under there, but I still think it was easier than taking it all off.
Walter
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------