fin attach
Posted: Sun Feb 19, 2012 4:56 pm
Hi all
Ran into a wee problem today mounting the fin.If anyone could offer
some insight it would be appreciated.
Mounted the horizontal bulkhead, stood the fin up to it and the front
attach bracket does not reach the fus 36 bulkhead
by 3/16".The fus 30 wrap stays flat on the table with the rest of the
tail cone doesn't it?
Slightly baffeled
Jason
817R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Ran into a wee problem today mounting the fin.If anyone could offer
some insight it would be appreciated.
Mounted the horizontal bulkhead, stood the fin up to it and the front
attach bracket does not reach the fus 36 bulkhead
by 3/16".The fus 30 wrap stays flat on the table with the rest of the
tail cone doesn't it?
Slightly baffeled
Jason
817R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------