spinner diameter
Posted: Sun Feb 19, 2012 4:52 pm
On the C-172-I, which seems to be where my prop came from, Cessna chose
to use a 13" spinner. On my plane, covering only the front for the
engine would take just a 9" spinner or so. Same engine. Anyone know why
Cessna used a bigger spinner than seems necessary?
Garry
FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
to use a 13" spinner. On my plane, covering only the front for the
engine would take just a 9" spinner or so. Same engine. Anyone know why
Cessna used a bigger spinner than seems necessary?
Garry
FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------