propeller arrangement
Posted: Sun Feb 19, 2012 4:52 pm
I have my prop off the airplane for inspection. The spacer and spinner
backplate are still attached to the prop by what appears to be press fit
slugs. Will these drive out with a drift or do they need to be pressed
out hydraulically?
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
backplate are still attached to the prop by what appears to be press fit
slugs. Will these drive out with a drift or do they need to be pressed
out hydraulically?
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------