The Murphy Builders Site

Leave the tank skins long. It's my understanding that the wing fairings
attach to them once the wings are in place. Craig

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Rebecca Brownell
Sent: Wednesday, July 09, 2008 5:59 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] tank skins

Hi all
could anyone confirm for me that the tank skins are to be trimmed
flush with the root end
of the wing top and bottom?This is probably a no brainer but the
manual is a little fuzzy
on this point .

thanks
Jason Brownell
817R



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Jason !

No ! The tank skins extend inboard of the wing root -
they are used to fasten the gap seal strips between the fuselage
& wing .... (You don't want to screw or rivet into the tank !!) :-)

Check the Archives for measurements ...
--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca/Ramble08

http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Thursday 10 July 2008 01:59, Rebecca Brownell wrote:

Hi all
could anyone confirm for me that the tank skins are to be trimmed
flush with the root end
of the wing top and bottom?This is probably a no brainer but the
manual is a little fuzzy
on this point .

thanks
Jason Brownell
817R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Thanks for your help,

Jason

On 9-Jul-08, at 11:04 PM, Bob Patterson wrote:

Hi Jason !

No ! The tank skins extend inboard of the wing root -
they are used to fasten the gap seal strips between the fuselage
& wing .... (You don't want to screw or rivet into the
tank !!) :-)

Check the Archives for measurements ...
--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca/Ramble08

http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Thursday 10 July 2008 01:59, Rebecca Brownell wrote:

Hi all
could anyone confirm for me that the tank skins are to be trimmed
flush with the root end
of the wing top and bottom?This is probably a no brainer but the
manual is a little fuzzy
on this point .

thanks
Jason Brownell
817R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------